|
[U-Boot,v4,5/7] drivers/misc: Add basic support for ATSHA204A Crypto module
|
- - - |
0 0 0 |
2017-06-09 |
Marek Behún |
stroese |
New |
|
[U-Boot,v4,4/7] drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support
|
- 1 - |
0 0 0 |
2017-06-09 |
Marek Behún |
stroese |
New |
|
[U-Boot,v4,3/7] arch/arm/dts: Add Turris Omnia device tree
|
- - - |
0 0 0 |
2017-06-09 |
Marek Behún |
stroese |
New |
|
[U-Boot,v4,2/7] orion_wdt: Support for the Orion Watchdog
|
- - - |
0 0 0 |
2017-06-09 |
Marek Behún |
stroese |
New |
|
[U-Boot,v4,1/7] driver/ddr: Add support for setting timing in hws_topology_map
|
- 1 - |
0 0 0 |
2017-06-09 |
Marek Behún |
stroese |
New |
|
[U-Boot] blk: dm: make blk_create_device() take a number of block instead of a size
|
- 1 - |
0 0 0 |
2017-06-09 |
Jean-Jacques Hiblot |
sjg |
New |
|
[U-Boot,v4,2/2] sun50i: a64: Add initial NanoPi A64 support
|
- - 1 |
0 0 0 |
2017-06-09 |
Jagannadha Sutradharudu Teki |
jagan |
New |
|
[U-Boot,v3,1/2] sun50i: a64: Sync Linux [oe]hci0 nodes
|
- - - |
0 0 0 |
2017-06-09 |
Jagannadha Sutradharudu Teki |
jagan |
New |
|
[U-Boot,1/1] board/ls2081ardb: Update qspi flash type and checkboard
|
- - - |
0 0 0 |
2017-06-09 |
Santan Kumar |
yorksun |
New |
|
[U-Boot,1/1] board/ls2080ardb: Disable SD-related GPIO programming
|
- - - |
0 0 0 |
2017-06-09 |
Santan Kumar |
yorksun |
New |
|
[U-Boot] common, image-sig: [BUG?] if no valid signature node found, do not boot signed FIT image
|
- - - |
0 0 0 |
2017-06-09 |
Heiko Schocher |
trini |
New |
|
[U-Boot] common, image-sig: [BUG?] if no valid signature node found, do not boot signed FIT image
|
- - - |
0 0 0 |
2017-06-08 |
Heiko Schocher |
trini |
New |
|
[U-Boot] ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
|
- - - |
0 0 0 |
2017-06-08 |
Christian Gmeiner |
sbabic |
New |
|
[U-Boot,v10,6/6] arm: socfpga: Add FPGA driver support for Arria 10
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot,v10,5/6] drivers: Enable FPGA driver build on SPL
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot,v10,4/6] arm: socfpga: Convert FPGA_SOCFPGA configuration to Kconfig
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot,v10,3/6] arm: socfpga: Convert FPGA and FPGA_ALTERA configuration to Kconfig
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot,v10,2/6] arm: socfpga: Restructure FPGA driver in the preparation to support A10
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot,v10,1/6] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset
|
- - - |
0 0 0 |
2017-06-08 |
Chee Tien Fong |
marex |
New |
|
[U-Boot] tegra: mmc: Set the bus width correctly
|
- - 2 |
0 0 0 |
2017-06-08 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,2/2] mmc: rpmb: update size format for write_counter
|
- 1 - |
0 0 0 |
2017-06-08 |
Kever Yang |
Jaehoon |
New |
|
[U-Boot,1/2] mmc: use new hwpart API when CONFIG_BLK enabled
|
- 1 - |
0 0 0 |
2017-06-08 |
Kever Yang |
Jaehoon |
New |
|
[U-Boot,2/2] ARM: rmobile: ulcb: Add ULCB board support
|
- - - |
0 0 0 |
2017-06-07 |
Marek Vasut |
iwamatsu |
New |
|
[U-Boot,1/2] ARM: rmobile: Add PFC PUEN bank 5 address
|
- - - |
0 0 0 |
2017-06-07 |
Marek Vasut |
iwamatsu |
New |
|
[U-Boot,v3,2/2] ARM: zynq: Add support for the topic-miamilite system-on-module
|
- - - |
0 0 0 |
2017-06-07 |
Mike Looijmans |
monstr |
New |
|
[U-Boot,v3,1/2] Move CONFIG_SF_DUAL_FLASH to defconfig
|
- - - |
0 0 0 |
2017-06-07 |
Mike Looijmans |
monstr |
New |
|
[U-Boot] net: Get mac address from driver as seed
|
1 - - |
0 0 0 |
2017-06-06 |
Jimmy Du |
jhersh |
New |
|
[U-Boot] drivers/net/phy/fixed: do not overwrite addr
|
- 1 1 |
0 0 0 |
2017-06-06 |
Christian Gmeiner |
jhersh |
New |
|
[U-Boot] x86: extend baudrate table with 57600
|
- - - |
0 0 0 |
2017-06-06 |
Christian Gmeiner |
bmeng |
New |
|
[U-Boot,7/7] serial: mxc: Add debug uart support
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,6/7] serial: mxc: Code cleanup
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,5/7] serial: mxc: Move common baud gen into _mxc_serial_setbrg
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,4/7] serial: mxc: Move common init into _mxc_serial_init
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,3/7] serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,2/7] serial: mxc: Use RFDIV in dm-code
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,1/7] serial: mxc: Add common mxc_uart reg space
|
- 1 - |
0 0 0 |
2017-06-06 |
Jagannadha Sutradharudu Teki |
sbabic |
New |
|
[U-Boot,RESEND] drivers/usb/ehci: Use platform-specific accessors
|
1 - - |
0 0 0 |
2017-06-05 |
Alexey Brodkin |
marex |
New |
|
[U-Boot,2/2] RFC: moveconfig: Add an experimental 'automatic imply' feature
|
- - - |
0 0 0 |
2017-06-05 |
Simon Glass |
sjg |
New |
|
[U-Boot,1/2] moveconfig.py: All piping in 'git show --stat' output
|
- - - |
0 0 0 |
2017-06-05 |
Simon Glass |
sjg |
New |
|
[U-Boot] arc: Move dram_init out of arch code, into board code
|
- - - |
0 0 0 |
2017-06-05 |
Alexandru Gagniuc |
abrodkin |
New |
|
[U-Boot] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO
|
- - - |
0 0 0 |
2017-06-05 |
Suresh Gupta |
jagan |
New |
|
[U-Boot] arm64: ls2088ardb: Add distro boot support
|
- - - |
0 0 0 |
2017-06-05 |
ying.zhang22455@nxp.com |
yorksun |
New |
|
[U-Boot,v2,31/31] dm: tegra: Move nyan-big and beaver to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,30/31] tegra: fdt: Ensure that the console UART is enabled
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,29/31] fdtdec: Drop old compatible values
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,28/31] tegra: Show a debug message if the LCD PMIC fails to start
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,27/31] dm: serial: Add livetree support
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,26/31] dm: serial: Separate out the core serial-device finding code
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,25/31] dm: serial: ns16550: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,24/31] dm: power: Convert as3722 to driver model
|
- 1 - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,23/31] power: Add a GPIO driver for the as3722 PMIC
|
- 1 - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,22/31] power: Add a regulator driver for the as3722 PMIC
|
- 1 - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,21/31] dm: tegra: mmc: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,20/31] dm: tegra: pwm: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,19/31] dm: tegra: i2c: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,18/31] dm: tegra: spi: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,17/31] dm: tegra: usb: Convert to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,16/31] dm: tegra: gpio: Convert to support livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,15/31] tegra: dts: Move stdout-path to /chosen
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,14/31] tegra: Don't set up the UART clocks again in U-Boot
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,13/31] dm: video: tegra124: Convert to livetree
|
1 - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,12/31] dm: tegra: Convert clock_decode_periph_id() to support livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,11/31] dm: tegra: Convert USB setup to livetree
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,10/31] tegra: nyan: Add a PMC syscon driver
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,09/31] tegra: spl: Enable debug UART
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,08/31] tegra: Fix up include file ordering
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,07/31] video: simple-panel: Add a little more debugging
|
1 - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,06/31] dm: video: Update pwm_backlight to support livetree
|
1 - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,05/31] dm: video: Sync display on backspace
|
1 - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,04/31] tegra: nyan-big: Enable bootstage
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,03/31] dm: Fix error handling when unflattening the DT
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,02/31] tegra: nyan-big: Enable the debug UART
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot,v2,01/31] tegra: video: Time the LCD init
|
- - - |
0 0 0 |
2017-06-03 |
Simon Glass |
tomcwarren |
New |
|
[U-Boot] ls1088a: Disable default enabled DISPLAY_BOARDINFO
|
- - - |
0 0 0 |
2017-06-02 |
Amrita Kumari |
yorksun |
New |
|
[U-Boot] imx6_spl: Add u-boot-dtb.img for SPL payload
|
- - - |
0 0 0 |
2017-06-01 |
Jagan Teki |
sbabic |
New |
|
[U-Boot] mx6sabresd: Fix guard file symbol
|
- - - |
0 0 0 |
2017-06-01 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot] axs10x: Move environment from I2C EEPROM to SD-card
|
- - - |
0 0 0 |
2017-06-01 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] axs10x: Get rid of both I2C and EEPROM who used to use I2C
|
- 1 - |
0 0 0 |
2017-06-01 |
Alexey Brodkin |
abrodkin |
New |
|
[U-Boot] wandboard: Remove unnecessary delay
|
- - - |
0 0 0 |
2017-06-01 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot,v2] ARM: zynq: Add support for the topic-miamilite system-on-module
|
- - - |
0 0 0 |
2017-06-01 |
Mike Looijmans |
monstr |
New |
|
[U-Boot,v5,5/5] usb: host: xhci-dwc3: Add generic PHY support
|
- 2 - |
0 0 0 |
2017-06-01 |
Patrice Chotard |
marex |
New |
|
[U-Boot,v5,4/5] drivers: phy: add generic_phy_valid() method
|
- 2 - |
0 0 0 |
2017-06-01 |
Patrice Chotard |
marex |
New |
|
[U-Boot,v5,3/5] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails
|
- 2 - |
0 0 0 |
2017-06-01 |
Patrice Chotard |
marex |
New |
|
[U-Boot,v5,2/5] usb: host: xhci-dwc3: Add dual role mode support from DT
|
- 2 - |
0 0 0 |
2017-06-01 |
Patrice Chotard |
marex |
New |
|
[U-Boot,v5,1/5] usb: host: xhci-dwc3: Convert driver to DM
|
- 1 - |
0 0 0 |
2017-06-01 |
Patrice Chotard |
marex |
New |
|
[U-Boot,4/4] nds32: board: Support ftsdc010 DM.
|
- - - |
0 0 0 |
2017-06-01 |
Andes |
Andes |
New |
|
[U-Boot,3/4] nds32: dts: Support ftsdc010 DM.
|
- - - |
0 0 0 |
2017-06-01 |
Andes |
Andes |
New |
|
[U-Boot,2/4] nds32: ftsdc010: Support ftsdc010 DM.
|
- - - |
0 0 0 |
2017-06-01 |
Andes |
Andes |
New |
|
[U-Boot,1/4] nds32: mmc: Support ftsdc010 DM.
|
- - - |
0 0 0 |
2017-06-01 |
Andes |
Andes |
New |
|
[U-Boot,4/4] cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
|
- - - |
0 0 0 |
2017-05-31 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot,3/4] cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
|
- - - |
0 0 0 |
2017-05-31 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot,2/4] mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
|
- - - |
0 0 0 |
2017-05-31 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot,1/4] mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
|
- - - |
0 0 0 |
2017-05-31 |
Fabio Estevam |
sbabic |
New |
|
[U-Boot,3/3] arm64: zynqmp: Check pmufw version
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot,2/3] fpga: zynqmppl: Reuse invoke_smc routine
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot,1/3] zynqmp: Define routines for mmio write and read
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot,2/2] zynq: Kconfig: Add Kconfig option for any DDR specific initialization
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot,1/2] arm64: zynqmp: Do not map unused OCM/TCM region
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot] arm64: zynqmp: Add comment about level shifter mode v1
|
- - - |
0 0 0 |
2017-05-30 |
Michal Simek |
monstr |
New |
|
[U-Boot] arm64: zynqmp: Add empty sleep.h file for psu_init* compilation
|
- - - |
0 0 0 |
2017-05-29 |
Michal Simek |
monstr |
New |