diff mbox series

[v7,10/28] mtd: rawnand: Fix nand_setup_data_interface() description

Message ID 20200529111322.7184-11-miquel.raynal@bootlin.com
State Accepted
Headers show
Series Allow vendor drivers to propose their own timings | expand

Commit Message

Miquel Raynal May 29, 2020, 11:13 a.m. UTC 
This is a copy/paste error and belongs to nand_init_data_interface()
description.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/raw/nand_base.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Comments

Miquel Raynal June 15, 2020, 9:05 a.m. UTC | #1 
On Fri, 2020-05-29 at 11:13:04 UTC, Miquel Raynal wrote:
> This is a copy/paste error and belongs to nand_init_data_interface()
> description.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2a477ce81165..01e788e0d010 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -941,11 +941,8 @@  static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
  * @chip: The NAND chip
  * @chipnr: Internal die id
  *
- * Find and configure the best data interface and NAND timings supported by
- * the chip and the driver.
- * First tries to retrieve supported timing modes from ONFI information,
- * and if the NAND chip does not support ONFI, relies on the
- * ->onfi_timing_mode_default specified in the nand_ids table.
+ * Configure what has been reported to be the best data interface and NAND
+ * timings supported by the chip and the driver.
  *
  * Returns 0 for success or negative error code otherwise.
  */