diff mbox series

[v7,17/28] mtd: rawnand: timings: Use default values for tPROG_max and tBERS_max

Message ID 20200529111322.7184-18-miquel.raynal@bootlin.com
State Accepted
Headers show
Series Allow vendor drivers to propose their own timings | expand

Commit Message

Miquel Raynal May 29, 2020, 11:13 a.m. UTC 
The ONFI parameter page of a chip might define more fine grained
tPROG_max and tBERS_max. When we do not have this information, we
default to the highest possible values (they are maxima anyway).

There is no point setting these fields at runtime, so explicitly move
these defaults to the main ONFI SDR timings structure. This way, we
will also be able to return a pointer to mode 0 directly when we will
create a default reset configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/raw/nand_timings.c | 31 ++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 12 deletions(-)

Comments

Miquel Raynal June 15, 2020, 9:04 a.m. UTC | #1 
On Fri, 2020-05-29 at 11:13:11 UTC, Miquel Raynal wrote:
> The ONFI parameter page of a chip might define more fine grained
> tPROG_max and tBERS_max. When we do not have this information, we
> default to the highest possible values (they are maxima anyway).
> 
> There is no point setting these fields at runtime, so explicitly move
> these defaults to the main ONFI SDR timings structure. This way, we
> will also be able to return a pointer to mode 0 directly when we will
> create a default reset configuration.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
index 54c7a1a8b038..efff3583c549 100644
--- a/drivers/mtd/nand/raw/nand_timings.c
+++ b/drivers/mtd/nand/raw/nand_timings.c
@@ -12,6 +12,13 @@ 
 
 #define ONFI_DYN_TIMING_MAX U16_MAX
 
+/*
+ * For non-ONFI chips we use the highest possible value for tPROG and tBERS.
+ * tR and tCCS will take the default values precised in the ONFI specification
+ * for timing mode 0, respectively 200us and 500ns.
+ *
+ * These four values are tweaked to be more accurate in the case of ONFI chips.
+ */
 static const struct nand_data_interface onfi_sdr_timings[] = {
 	/* Mode 0 */
 	{
@@ -20,6 +27,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 20000,
 			.tALS_min = 50000,
@@ -63,6 +72,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 10000,
 			.tALS_min = 25000,
@@ -106,6 +117,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 10000,
 			.tALS_min = 15000,
@@ -149,6 +162,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 5000,
 			.tALS_min = 10000,
@@ -192,6 +207,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 5000,
 			.tALS_min = 10000,
@@ -235,6 +252,8 @@  static const struct nand_data_interface onfi_sdr_timings[] = {
 		.timings.sdr = {
 			.tCCS_min = 500000,
 			.tR_max = 200000000,
+			.tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
+			.tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX,
 			.tADL_min = 400000,
 			.tALH_min = 5000,
 			.tALS_min = 10000,
@@ -357,18 +376,6 @@  int onfi_fill_data_interface(struct nand_chip *chip,
 
 		/* nanoseconds -> picoseconds */
 		timings->tCCS_min = 1000UL * onfi->tCCS;
-	} else {
-		struct nand_sdr_timings *timings = &iface->timings.sdr;
-		/*
-		 * For non-ONFI chips we use the highest possible value for
-		 * tPROG and tBERS. tR and tCCS will take the default values
-		 * precised in the ONFI specification for timing mode 0,
-		 * respectively 200us and 500ns.
-		 */
-
-		/* microseconds -> picoseconds */
-		timings->tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
-		timings->tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
 	}
 
 	return 0;