Show patches with: State = Action Required       |    Archived = No       |   1025 patches
« 1 2 ... 3 4 5 … 10 11 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[RESEND,3/3] emulation: qemu-sbsa: Enable PCI enumeration [RESEND,1/3] pci_auto: Downgrade prefetch if necessary - - - - --- 2025-03-10 Patrick Rudolph trini New
[RESEND,2/3] emulation: qemu-sbsa: Select SYS_PCI_64BIT [RESEND,1/3] pci_auto: Downgrade prefetch if necessary - - - - --- 2025-03-10 Patrick Rudolph trini New
[RESEND,1/3] pci_auto: Downgrade prefetch if necessary [RESEND,1/3] pci_auto: Downgrade prefetch if necessary - - - - --- 2025-03-10 Patrick Rudolph trini New
[v2,1/1] cmd: simplify eficonfig_init() [v2,1/1] cmd: simplify eficonfig_init() - - 1 - --- 2025-03-10 Heinrich Schuchardt xypron New
RISCV: config: Remove CFG_SYS_SDRAM_BASE RISCV: config: Remove CFG_SYS_SDRAM_BASE - - - - --- 2025-03-10 Jimmy Ho Andes New
[RESEND,2/2] mtd: spi-nor-ids: Add support for S28HL02GT Add support for Infineon S28HL256T and S28HL02GT - - 1 - --- 2025-03-10 Takahiro Kuwano jagan New
[RESEND,1/2] mtd: spi-nor-ids: Add support for S28HL256T Add support for Infineon S28HL256T and S28HL02GT - - 1 - --- 2025-03-10 Takahiro Kuwano jagan New
[2/2] sunxi: H616: dram: Improve address wrapping detection sunxi: h616: fix DRAM size detection - - - 1 --- 2025-03-09 Jernej Škrabec apritzel New
[1/2] sunxi: h616: dram: Rework size detection sunxi: h616: fix DRAM size detection - - 1 - --- 2025-03-09 Jernej Škrabec apritzel New
sunxi: mmc: Improve reset procedure sunxi: mmc: Improve reset procedure - - - - --- 2025-03-09 Jernej Škrabec apritzel New
[RFC] net: miiphybb: Convert documentation to rst [RFC] net: miiphybb: Convert documentation to rst - - - - --- 2025-03-08 Marek Vasut xypron New
[v2] net: miiphybb: Update documentation [v2] net: miiphybb: Update documentation - - 1 - --- 2025-03-08 Marek Vasut xypron New
clk: sophgo: Fix return values of register updating helpers clk: sophgo: Fix return values of register updating helpers - 1 - 1 --- 2025-03-07 Yao Zi Andes New
riscv: dts: cv18xx: Drop unused dummy clocks riscv: dts: cv18xx: Drop unused dummy clocks - - - - --- 2025-03-07 Yao Zi Andes New
cmd: Kconfig: Fix submenu for network commands cmd: Kconfig: Fix submenu for network commands - 1 1 - --- 2025-03-07 Paul Barker trini New
[v2,4/4] board: sifive: Remove dead board_fdt_blob_setup Simplify retrieving FDT from SBI in S-Mode - - 1 - --- 2025-03-07 Yao Zi Andes New
[v2,3/4] board: starfive: Remove duplicated board_fdt_blob_setup Simplify retrieving FDT from SBI in S-Mode - - 1 - --- 2025-03-07 Yao Zi Andes New
[v2,2/4] board: qemu: riscv: Remove duplicated board_fdt_blob_setup Simplify retrieving FDT from SBI in S-Mode - - 1 - --- 2025-03-07 Yao Zi Andes New
[v2,1/4] riscv: lib: Add a default implementation of board_fdt_blob_setup Simplify retrieving FDT from SBI in S-Mode - - - - --- 2025-03-07 Yao Zi Andes New
drivers: ddr: altera: Fix integer overflow during size calculation drivers: ddr: altera: Fix integer overflow during size calculation - - 1 - --- 2025-03-07 Naresh Kumar Ravulapalli monstr Under Review
drivers: spi: Fix data loss issue in QSPI drivers: spi: Fix data loss issue in QSPI - - - - --- 2025-03-07 Naresh Kumar Ravulapalli jagan New
[2/2] arm: dts: mediatek: disable fan node for mt7987 [1/2] pwm: mediatek: add pwm support for MediaTek MT7987 SoC - - - - --- 2025-03-07 Weijie Gao trini New
[1/2] pwm: mediatek: add pwm support for MediaTek MT7987 SoC [1/2] pwm: mediatek: add pwm support for MediaTek MT7987 SoC - - - - --- 2025-03-07 Weijie Gao trini New
arm: mediatek: remove wmcpu-reserved@50000000 node from mt7987 dts arm: mediatek: remove wmcpu-reserved@50000000 node from mt7987 dts - 1 - - --- 2025-03-07 Weijie Gao trini New
net: miiphybb: Update documentation net: miiphybb: Update documentation - - 1 - --- 2025-03-06 Marek Vasut trini New
checkpatch.pl: Report an error for CONFIG_xPL_BUILD in device trees checkpatch.pl: Report an error for CONFIG_xPL_BUILD in device trees - - 1 - --- 2025-03-06 Hendrik Donner trini New
[1/1] test: use truncate in mk_fs() [1/1] test: use truncate in mk_fs() - - - - --- 2025-03-06 Heinrich Schuchardt trini New
efi_loader: Install the ACPI table from the bloblist efi_loader: Install the ACPI table from the bloblist - 1 - - --- 2025-03-06 Simon Glass xypron New
[3/3] net: lwip: remove net_lwip_remove_netif() net: lwip: map struct udevice to struct netif - - - - --- 2025-03-06 Jerome Forissier jforissier New
[2/3] net: lwip: save struct netif in struct udevice net: lwip: map struct udevice to struct netif - - - - --- 2025-03-06 Jerome Forissier jforissier New
[1/3] dm: core: add 'netif' field to struct udevice for NET_LWIP net: lwip: map struct udevice to struct netif - - - - --- 2025-03-06 Jerome Forissier jforissier New
cmd: version: Get information about GCC and LD back cmd: version: Get information about GCC and LD back - 1 - - --- 2025-03-06 Michal Simek trini Under Review
[v7,8/8] MAINTAINERS: Update Starfive visionfive2 maintain files. Add Starfive JH7110 Cadence USB driver - - 1 - --- 2025-03-06 Minda Chen marex New
[v7,7/8] configs: starfive: Add visionfive2 cadence USB configuration Add Starfive JH7110 Cadence USB driver - - - 1 --- 2025-03-06 Minda Chen marex New
[v7,6/8] spl: starfive: visionfive2: Disable USB overcurrent pin by default. Add Starfive JH7110 Cadence USB driver - - - 1 --- 2025-03-06 Minda Chen marex New
[v7,5/8] usb: cdns: starfive: Add cdns USB driver Add Starfive JH7110 Cadence USB driver - - 1 1 --- 2025-03-06 Minda Chen marex New
[v7,4/8] usb: cdns: starfive: Get dr mode from wrapper device dts node Add Starfive JH7110 Cadence USB driver - - 1 - --- 2025-03-06 Minda Chen marex New
[v7,3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver Add Starfive JH7110 Cadence USB driver - - - 1 --- 2025-03-06 Minda Chen marex New
[v7,2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver Add Starfive JH7110 Cadence USB driver - - 1 1 --- 2025-03-06 Minda Chen marex New
[v7,1/8] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode() Add Starfive JH7110 Cadence USB driver - - 1 - --- 2025-03-06 Minda Chen marex New
[v5,29/29] net: Provide a function to run network operations pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,28/29] net: Drop #ifdef in parse_args() pxe: Precursor series for supporting read_all() in extlinux / PXE 1 - - - --- 2025-03-06 Simon Glass trini New
[v5,27/29] net: Refactor part of netboot_common() into a function pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,26/29] net: Return the size from parse_args() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,25/29] net: Return the address and size from parse_addr_size() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,24/29] net: Return the load address from parse_args() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,23/29] net: Simplify parse_args() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,22/29] net: Tidy up the comments to parse_args() pxe: Precursor series for supporting read_all() in extlinux / PXE 1 - - - --- 2025-03-06 Simon Glass trini New
[v5,21/29] net: Keep the bootstage functions together pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,20/29] boot: pxe: Refactor label_run_boot() to avoid cmdline pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,19/29] pxe_utils: Simplify default fdt in label_run_boot() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,18/29] boot: pxe: Use bootm_...() functions where possible pxe: Precursor series for supporting read_all() in extlinux / PXE - - 1 - --- 2025-03-06 Simon Glass trini New
[v5,17/29] boot: Support compressed booti images in bootm pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,16/29] boot: Support booti format in bootm pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,15/29] boot: arm: riscv: sandbox: Add a format for the booti file pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,14/29] boot: Convert IMAGE_FORMAT into an enum pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,13/29] bootm: Allow building bootm.c without CONFIG_SYS_BOOTM_LEN pxe: Precursor series for supporting read_all() in extlinux / PXE - - 1 - --- 2025-03-06 Simon Glass trini New
[v5,12/29] boot: Pass just the FDT argument to label_process_fdt() pxe: Precursor series for supporting read_all() in extlinux / PXE - - 1 - --- 2025-03-06 Simon Glass trini New
[v5,11/29] boot: Split pxe label_run_boot() into two parts pxe: Precursor series for supporting read_all() in extlinux / PXE - - 1 - --- 2025-03-06 Simon Glass trini New
[v5,10/29] boot: Split pxe label_boot() into two parts pxe: Precursor series for supporting read_all() in extlinux / PXE - - 1 - --- 2025-03-06 Simon Glass trini New
[v5,09/29] boot: Use strlcpy() in label_boot() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,08/29] x86: Drop the unnecessary base_ptr argument to zboot_dump() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,07/29] bootstd: Correct display of kernel version pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,06/29] x86: Move the bootm state for zimage into cmd/ pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,05/29] x86: Rename state to bmi pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,04/29] x86: Move x86 zboot state into struct bootm_info pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,03/29] x86: Drop duplicate definition of zimage_dump() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,02/29] x86: Rename zboot_run() to zboot_run_args() pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
[v5,01/29] x86: Make do_zboot_states() static pxe: Precursor series for supporting read_all() in extlinux / PXE - - - - --- 2025-03-06 Simon Glass trini New
xilinx: versal: add firmware access to PMC multi Boot mode register xilinx: versal: add firmware access to PMC multi Boot mode register - - - - --- 2025-03-05 Prasad Kummari monstr New
[v2] spi: Introduce initial EEPROM driver mode support [v2] spi: Introduce initial EEPROM driver mode support - - - - --- 2025-03-05 Loureiro, Joao trini New
[v2] configs: j784s4-am69: Enable UFS [v2] configs: j784s4-am69: Enable UFS - - - - --- 2025-03-05 Kumar, Udit trini New
[v3,8/8] configs: sam9x75_curiosity: Add initial mmc default config Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,5/8] ARM: at91: Add sam9x7 soc Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[v3,1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h Add support for sam9x7 SoC and SAM9X75 Curiosity board - - - - --- 2025-03-05 Manikandan Muralidharan ehristev New
[13/13] configs: phycore_am62ax_a53_defconfig: Add SoM overlays to OF_OVERLAY_LIST *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[12/13] arm: dts: k3-am62a-phycore-som-binman: Add SoM overlays *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[11/13] board: phytec: common: Add phyCORE-AM62Ax *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[10/13] board: phytec: common: k3: Make configure_capsule_updates() static *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[09/13] arch: arm: dts: k3-am625-phyboard-lyra: Add missing boot phase tag *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[08/13] arch: arm: dts: k3-am62a7-phyboard-lyra: Add missing boot phase tag *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[07/13] board: phytec: phycore_am62ax: Add Network/SPI/DFU env variables *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[06/13] board: phytec: phycore_am62x: Use custom k3_dfu.env fragment *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[05/13] configs: Add phycore_am62ax_r5_usbdfu_defconfig *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[04/13] doc: phytec: k3: Add a common part for Environment and EFI Capsules *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[03/13] configs: phycore_am62ax_a53_defconfig: Enable capsule update *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[02/13] include: configs: phycore-am62ax: Define capsule FW names *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
[01/13] arm: dts: k3-am62a-phycore-som-binman: Provide capsule nodes *** Various Improvements for phyCORE-AM62/A SoMs *** - - - - --- 2025-03-05 Wadim Egorov trini New
sandbox_vpl: Enable missing TPL_DM_I2C symbol sandbox_vpl: Enable missing TPL_DM_I2C symbol - - - - --- 2025-03-04 Tom Rini trini New
serial: Add missing TPL_SYS_NS16550_SERIAL symbol serial: Add missing TPL_SYS_NS16550_SERIAL symbol - - - - --- 2025-03-04 Tom Rini trini New
[3/3] net: ravb: Fix error handling in ravb_probe ravb driver fixes - 1 - - --- 2025-03-04 Paul Barker marex New
[2/3] net: ravb: Fix RX frame size limit ravb driver fixes - 1 1 - --- 2025-03-04 Paul Barker marex New
[1/3] net: ravb: Add dependency on CONFIG_BITBANGMII ravb driver fixes - 1 1 - --- 2025-03-04 Paul Barker marex New
clk: rzg2l: Ignore disable for core clocks clk: rzg2l: Ignore disable for core clocks - - 1 - --- 2025-03-04 Paul Barker marex New
[2/2] vepxress64: add guide for running FVP with TF-A vepxpress64: disable CRC32 by default and add FVP with TF-A guide - - 1 - --- 2025-03-04 Harrison Mutai trini New
« 1 2 ... 3 4 5 … 10 11 »