Show patches with: Submitter = Samuel Holland       |   384 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[5/5] gpio: axp: Remove virtual VBUS enable GPIO sunxi: Control USB VBUS supplies via DT regulators - - - - --- 2023-10-31 Samuel Holland apritzel New
[4/5] sunxi: Remove obsolete USBx_VBUS_PIN Kconfig symbols sunxi: Control USB VBUS supplies via DT regulators - - - - --- 2023-10-31 Samuel Holland apritzel New
[3/5] phy: sun4i-usb: Control supplies via the regulator uclass sunxi: Control USB VBUS supplies via DT regulators - - - - --- 2023-10-31 Samuel Holland apritzel New
[2/5] sunxi: Enable PMIC drivevbus regulator support for USB supplies sunxi: Control USB VBUS supplies via DT regulators - - - - --- 2023-10-31 Samuel Holland apritzel New
[1/5] power: regulator: Add a driver for the AXP PMIC drivevbus sunxi: Control USB VBUS supplies via DT regulators - - - - --- 2023-10-31 Samuel Holland apritzel New
riscv: Weakly define invalidate_icache_range() riscv: Weakly define invalidate_icache_range() - - 1 - --- 2023-10-31 Samuel Holland Andes Accepted
riscv: Align the trap handler to 64 bytes riscv: Align the trap handler to 64 bytes - - 1 - --- 2023-10-31 Samuel Holland Andes Accepted
riscv: Sort target configs alphabetically riscv: Sort target configs alphabetically - - 1 - --- 2023-10-31 Samuel Holland Andes Accepted
net: sun8i_emac: Drop DM_GPIO checks net: sun8i_emac: Drop DM_GPIO checks - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
[2/2] sunxi: mmc: Move header to the driver directory [1/2] sunxi: mmc: Sort compatible strings numerically - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
[1/2] sunxi: mmc: Sort compatible strings numerically [1/2] sunxi: mmc: Sort compatible strings numerically - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
[v3,4/4] sunxi: Enable SPL FIT loading for 32-bit SoCs sunxi: SPL FIT support for 32-bit sunxi SoCs - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
[v3,3/4] sunxi: binman: Support FIT generation for 32-bit SoCs sunxi: SPL FIT support for 32-bit sunxi SoCs - - 2 - --- 2023-10-31 Samuel Holland apritzel Accepted
[v3,2/4] sunxi: binman: Move BL31 and SCP firmware addresses to Kconfig sunxi: SPL FIT support for 32-bit sunxi SoCs - - 2 - --- 2023-10-31 Samuel Holland apritzel Accepted
[v3,1/4] sunxi: spl: Disable padding from SPL_PAD_TO sunxi: SPL FIT support for 32-bit sunxi SoCs - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
[RESEND,v3] serial: ns16550: Enable clocks during probe [RESEND,v3] serial: ns16550: Enable clocks during probe - - 1 - --- 2023-10-31 Samuel Holland trini Changes Requested
pinctrl: sunxi: Avoid using .bss for SPL pinctrl: sunxi: Avoid using .bss for SPL - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
clk: sunxi: Use the right symbol in the Makefile clk: sunxi: Use the right symbol in the Makefile - - 1 - --- 2023-10-31 Samuel Holland apritzel Accepted
fastboot: Only call the bootm command if it is enabled fastboot: Only call the bootm command if it is enabled - - 2 - --- 2023-02-20 Samuel Holland trini Accepted
[3/3] remoteproc: Remove legacy probing method remoteproc: uclass cleanup - - 1 - --- 2023-02-20 Samuel Holland trini Changes Requested
[2/3] remoteproc: Remove unused mem_type platform data remoteproc: uclass cleanup - - - - --- 2023-02-20 Samuel Holland trini Changes Requested
[1/3] remoteproc: Move rproc_cfg_arr out of the uclass header remoteproc: uclass cleanup - - 1 - --- 2023-02-20 Samuel Holland trini Changes Requested
riscv: Support CONFIG_REMAKE_ELF riscv: Support CONFIG_REMAKE_ELF - - - - --- 2023-02-20 Samuel Holland Andes Accepted
[6/6] clk: Add a .get_parent operation clk: uclass fixes and improvements - - - - --- 2023-02-20 Samuel Holland forty Changes Requested
[5/6] clk: Remove an unneeded check from clk_get_parent_rate() clk: uclass fixes and improvements - - 2 - --- 2023-02-20 Samuel Holland forty Changes Requested
[4/6] clk: Fix rate caching in clk_get_parent_rate() clk: uclass fixes and improvements - 1 1 - --- 2023-02-20 Samuel Holland forty Changes Requested
[3/6] clk: Fix error handling in clk_get_parent() clk: uclass fixes and improvements - 1 - - --- 2023-02-20 Samuel Holland forty Changes Requested
[2/6] clk: Fix error handling in clk_get_rate() clk: uclass fixes and improvements - 1 1 - --- 2023-02-20 Samuel Holland forty Changes Requested
[1/6] clk: Handle error pointers in clk_valid() clk: uclass fixes and improvements - 1 1 - --- 2023-02-20 Samuel Holland forty Changes Requested
ARM: dts: sun6i: mixtile-loftq: Add USB1 VBUS regulator ARM: dts: sun6i: mixtile-loftq: Add USB1 VBUS regulator - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[3/3] gpio: axp/sunxi: Remove virtual VBUS detection GPIO power: Model X-Powers PMIC VBUS detection using the driver model - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[2/3] sunxi: Switch to PMIC USB power supply VBUS detection power: Model X-Powers PMIC VBUS detection using the driver model - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[1/3] power: regulator: Add a driver for the AXP USB power supply power: Model X-Powers PMIC VBUS detection using the driver model 1 - - - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,5/5] net: sun8i-emac: Remove the SoC variant ID net: sun8i-emac: Allwinner D1 Support - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,4/5] net: sun8i-emac: Use common syscon setup for R40 net: sun8i-emac: Allwinner D1 Support - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,3/5] net: sun8i-emac: Add a flag for the internal PHY switch net: sun8i-emac: Allwinner D1 Support - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,2/5] net: sun8i-emac: Add a flag for RMII support net: sun8i-emac: Allwinner D1 Support - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,1/5] net: sun8i-emac: Add a structure for variant data net: sun8i-emac: Allwinner D1 Support - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,6/6] mtd: nand: sunxi: Pass the device to the init function mtd: nand: sunxi: Convert to devicetree and the driver model 1 - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,5/6] mtd: nand: sunxi: Convert to the driver model mtd: nand: sunxi: Convert to devicetree and the driver model - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,4/6] mtd: nand: sunxi: Convert from fdtdec to ofnode mtd: nand: sunxi: Convert to devicetree and the driver model 1 - - - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,3/6] mtd: nand: sunxi: Remove an unnecessary check mtd: nand: sunxi: Convert to devicetree and the driver model - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,2/6] pinctrl: sunxi: Add NAND pinmuxes mtd: nand: sunxi: Convert to devicetree and the driver model - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,1/6] clk: sunxi: Add NAND clocks and resets mtd: nand: sunxi: Convert to devicetree and the driver model 1 - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,4/4] sunxi: Enable SPL FIT loading for 32-bit SoCs sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2023-01-22 Samuel Holland apritzel Superseded
[v2,3/4] sunxi: binman: Support FIT generation for 32-bit SoCs sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2023-01-22 Samuel Holland apritzel Superseded
[v2,2/4] sunxi: binman: Move BL31 and SCP firmware addresses to Kconfig sunxi: SPL FIT support for 32-bit sunxi SoCs - - 1 - --- 2023-01-22 Samuel Holland apritzel Superseded
[v2,1/4] sunxi: spl: Disable padding from SPL_PAD_TO sunxi: SPL FIT support for 32-bit sunxi SoCs - - - - --- 2023-01-22 Samuel Holland apritzel Superseded
Kconfig: Remove an impossible condition Kconfig: Remove an impossible condition 1 - - - --- 2023-01-22 Samuel Holland apritzel Accepted
[v3,2/2] serial: ns16550: Enable clocks during probe [v3,1/2] configs: phycore-rk3288: Enable CONFIG_LTO - - 1 - --- 2023-01-22 Samuel Holland apritzel Superseded
[v3,1/2] configs: phycore-rk3288: Enable CONFIG_LTO [v3,1/2] configs: phycore-rk3288: Enable CONFIG_LTO - - 1 - --- 2023-01-22 Samuel Holland apritzel Superseded
[v2,2/2] reset: Allow reset_get_by_name() with NULL name [v2,1/2] clk: Allow clk_get_by_name() with NULL name - - 1 - --- 2023-01-22 Samuel Holland apritzel Accepted
[v2,1/2] clk: Allow clk_get_by_name() with NULL name [v2,1/2] clk: Allow clk_get_by_name() with NULL name - - 2 - --- 2023-01-22 Samuel Holland apritzel Accepted
dm: core: Use full printf() format when possible dm: core: Use full printf() format when possible - - 2 - --- 2023-01-21 Samuel Holland sjg Accepted
[2/2] sunxi: binman: Fix U-Boot offset when SPL is not 32 KiB sunxi: binman: Fix U-Boot offset when SPL is not 32 KiB - 1 2 - --- 2023-01-21 Samuel Holland apritzel Accepted
[1/2] binman: Add 'min-size' entry property sunxi: binman: Fix U-Boot offset when SPL is not 32 KiB - - 2 - --- 2023-01-21 Samuel Holland sjg Accepted
[v2,3/3] power: pmic: axp: Bind regulators from the DT power: X-Powers PMIC regulator support - - 1 - --- 2023-01-21 Samuel Holland apritzel Accepted
[v2,2/3] power: regulator: Add a driver for AXP PMIC regulators power: X-Powers PMIC regulator support - - - - --- 2023-01-21 Samuel Holland apritzel Accepted
[v2,1/3] power: pmic: axp: Provide a variant ID in the driver data power: X-Powers PMIC regulator support - - 1 - --- 2023-01-21 Samuel Holland apritzel Accepted
[v2] serial: ns16550: Enable clocks during probe [v2] serial: ns16550: Enable clocks during probe - - - - --- 2022-12-13 Samuel Holland trini Superseded
[5/5] video: sunxi: dw-hdmi: Use DM for HVCC regulator video: sunxi: dw-hdmi: Partial OF conversion - - - - --- 2022-11-28 Samuel Holland apritzel Superseded
[4/5] video: sunxi: dw-hdmi: Use DM for clock gates and resets video: sunxi: dw-hdmi: Partial OF conversion - - - - --- 2022-11-28 Samuel Holland apritzel Superseded
[3/5] video: sunxi: dw-hdmi: Read address from DT node video: sunxi: dw-hdmi: Partial OF conversion - - 1 - --- 2022-11-28 Samuel Holland apritzel Accepted
[2/5] video: sunxi: dw-hdmi: Probe driver by compatible video: sunxi: dw-hdmi: Partial OF conversion - - 1 - --- 2022-11-28 Samuel Holland apritzel Accepted
[1/5] clk: sunxi: Add DE2 display-related clocks/resets video: sunxi: dw-hdmi: Partial OF conversion - - 1 - --- 2022-11-28 Samuel Holland apritzel Accepted
[3/3] power: pmic: axp: Bind regulators from the DT power: X-Powers PMIC regulator support - - - - --- 2022-11-28 Samuel Holland apritzel Accepted
[2/3] power: regulator: Add a driver for AXP PMIC regulators power: X-Powers PMIC regulator support - - - - --- 2022-11-28 Samuel Holland apritzel Accepted
[1/3] power: pmic: axp: Provide a variant ID in the driver data power: X-Powers PMIC regulator support - - 1 - --- 2022-11-28 Samuel Holland apritzel Accepted
[2/2] reset: Allow reset_get_by_name() with NULL name [1/2] clk: Allow clk_get_by_name() with NULL name - - 1 - --- 2022-11-28 Samuel Holland forty Changes Requested
[1/2] clk: Allow clk_get_by_name() with NULL name [1/2] clk: Allow clk_get_by_name() with NULL name - - 1 - --- 2022-11-28 Samuel Holland forty Changes Requested
serial: ns16550: Enable clocks during probe serial: ns16550: Enable clocks during probe - - 1 - --- 2022-11-28 Samuel Holland trini Changes Requested
clk: sunxi: Add an A31/A23/A33 legacy PRCM MFD driver clk: sunxi: Add an A31/A23/A33 legacy PRCM MFD driver - - 1 - --- 2022-11-19 Samuel Holland trini Deferred
[v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes [v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes - - 1 - --- 2022-11-18 Samuel Holland apritzel Accepted
pinctrl: sunxi: Add P2WI and RSB pinmuxes pinctrl: sunxi: Add P2WI and RSB pinmuxes - - - - --- 2022-11-18 Samuel Holland apritzel Superseded
[22/22] spl: sunxi: Replace ARCH_SUNXI with BOARD_SUNXI sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[21/22] disk: sunxi: Replace ARCH_SUNXI with BOARD_SUNXI sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[20/22] drivers: sunxi: Replace ARCH_SUNXI with BOARD_SUNXI sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[19/22] env: sunxi: Replace ARCH_SUNXI with BOARD_SUNXI sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[18/22] sunxi: Move most board options to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[17/22] sunxi: Move TEXT_BASE to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[16/22] sunxi: Move SYS_LOAD_ADDR to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[15/22] sunxi: Move SPL_TEXT_BASE to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[14/22] sunxi: Move SPL_BSS_START_ADDR to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[13/22] sunxi: Move PRE_CON_BUF_ADDR to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[12/22] sunxi: Clean up the SPL_STACK_R_ADDR defaults sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[11/22] sunxi: Hide the SUNXI_MINIMUM_DRAM_MB symbol sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[10/22] sunxi: Move default values to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[09/22] sunxi: Enable the I2C driver by default sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[08/22] sunxi: Downgrade driver selections to implications sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[07/22] sunxi: Globally enable SUPPORT_SPL sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[06/22] sunxi: Move most Kconfig selections to the board Kconfig sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[05/22] sunxi: Share the board Kconfig across architectures sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
[04/22] sunxi: Hide image type selection if SPL is disabled sunxi: Prepare platform Kconfig to support multiple architectures - - 1 - --- 2022-11-01 Samuel Holland trini Deferred
[03/22] sunxi: Add missing dependencies to Kconfig selections sunxi: Prepare platform Kconfig to support multiple architectures - - 1 - --- 2022-11-01 Samuel Holland trini Deferred
[02/22] sunxi: Remove unnecessary Kconfig selections sunxi: Prepare platform Kconfig to support multiple architectures - - 1 - --- 2022-11-01 Samuel Holland trini Deferred
[01/22] sunxi: Fix default-enablement of USB host drivers sunxi: Prepare platform Kconfig to support multiple architectures - - - - --- 2022-11-01 Samuel Holland trini Deferred
sunxi: Enable PHY_SUN4I_USB by default for new SoCs sunxi: Enable PHY_SUN4I_USB by default for new SoCs - - - - --- 2022-10-31 Samuel Holland trini Deferred
spl: Fix SPL_ATF and SPL_OPENSBI dependencies spl: Fix SPL_ATF and SPL_OPENSBI dependencies - - - - --- 2022-10-31 Samuel Holland trini Accepted
usb: ohci: Use a flexible array member for portstatus usb: ohci: Use a flexible array member for portstatus - - - - --- 2022-10-31 Samuel Holland trini Deferred
fdt: Fix bounds check in devfdt_get_addr_index fdt: Fix bounds check in devfdt_get_addr_index - 1 1 - --- 2022-10-31 Samuel Holland sjg Changes Requested
« 1 2 3 4 »