@@ -1,8 +1,5 @@
if ARCH_SUNXI
-config IDENT_STRING
- default " Allwinner Technology"
-
config DRAM_SUN4I
bool
help
@@ -99,17 +96,6 @@ config AXP_PMIC_BUS
Select this PMIC bus access helpers for Sunxi platform PRCM or other
AXP family PMIC devices.
-config SUNXI_SRAM_ADDRESS
- hex
- default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
- default 0x20000 if SUN50I_GEN_H6
- default 0x0
- ---help---
- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
- with the first SRAM region being located at address 0.
- Some newer SoCs map the boot ROM at address 0 instead and move the
- SRAM to a different address.
-
config SUNXI_A64_TIMER_ERRATUM
bool
@@ -573,48 +559,6 @@ config DRAM_ODT_CORRECTION
then the correction is negative. Usually the value for this is 0.
endif
-config SYS_CLK_FREQ
- default 408000000 if MACH_SUNIV
- default 1008000000 if MACH_SUN4I
- default 1008000000 if MACH_SUN5I
- default 1008000000 if MACH_SUN6I
- default 912000000 if MACH_SUN7I
- default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
- default 1008000000 if MACH_SUN8I
- default 1008000000 if MACH_SUN9I
- default 888000000 if MACH_SUN50I_H6
- default 1008000000 if MACH_SUN50I_H616
-
-config SYS_CONFIG_NAME
- default "suniv" if MACH_SUNIV
- default "sun4i" if MACH_SUN4I
- default "sun5i" if MACH_SUN5I
- default "sun6i" if MACH_SUN6I
- default "sun7i" if MACH_SUN7I
- default "sun8i" if MACH_SUN8I
- default "sun9i" if MACH_SUN9I
- default "sun50i" if MACH_SUN50I
- default "sun50i" if MACH_SUN50I_H6
- default "sun50i" if MACH_SUN50I_H616
-
-config SYS_BOARD
- default "sunxi"
-
-config SYS_SOC
- default "sunxi"
-
-config SUNXI_MINIMUM_DRAM_MB
- int "minimum DRAM size"
- default 32 if MACH_SUNIV
- default 64 if MACH_SUN8I_V3S
- default 256
- ---help---
- Minimum DRAM size expected on the board. Traditionally we assumed
- 256 MB, so that U-Boot would load at 160MB. With co-packaged DRAM
- we have smaller sizes, though, so that U-Boot's own load address and
- the default payload addresses must be shifted down.
- This is expected to be fixed by the SoC selection.
-
config UART0_PORT_F
bool "UART0 on MicroSD breakout board"
---help---
@@ -985,17 +929,6 @@ config GMAC_TX_DELAY
---help---
Set the GMAC Transmit Clock Delay Chain value.
-config SPL_STACK_R_ADDR
- default 0x81e00000 if MACH_SUNIV
- default 0x4fe00000 if MACH_SUN4I
- default 0x4fe00000 if MACH_SUN5I
- default 0x4fe00000 if MACH_SUN6I
- default 0x4fe00000 if MACH_SUN7I
- default 0x4fe00000 if MACH_SUN8I
- default 0x2fe00000 if MACH_SUN9I
- default 0x4fe00000 if MACH_SUN50I
- default 0x4fe00000 if SUN50I_GEN_H6
-
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV
@@ -52,6 +52,74 @@ config BOARD_SUNXI
if BOARD_SUNXI
+config IDENT_STRING
+ default " Allwinner Technology"
+
+config SPL_STACK_R_ADDR
+ default 0x81e00000 if MACH_SUNIV
+ default 0x4fe00000 if MACH_SUN4I
+ default 0x4fe00000 if MACH_SUN5I
+ default 0x4fe00000 if MACH_SUN6I
+ default 0x4fe00000 if MACH_SUN7I
+ default 0x4fe00000 if MACH_SUN8I
+ default 0x2fe00000 if MACH_SUN9I
+ default 0x4fe00000 if MACH_SUN50I
+ default 0x4fe00000 if SUN50I_GEN_H6
+
+config SUNXI_MINIMUM_DRAM_MB
+ int "minimum DRAM size"
+ default 32 if MACH_SUNIV
+ default 64 if MACH_SUN8I_V3S
+ default 256
+ help
+ Minimum DRAM size expected on the board. Traditionally we
+ assumed 256 MB, so that U-Boot would load at 160MB. With
+ co-packaged DRAM we have smaller sizes, though, so U-Boot's
+ own load address and the default payload addresses must be
+ shifted down. This is expected to be fixed by the SoC
+ selection.
+
+config SUNXI_SRAM_ADDRESS
+ hex
+ default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
+ default 0x20000 if SUN50I_GEN_H6
+ default 0x0
+ help
+ Older Allwinner SoCs have their boot mask ROM mapped just
+ below 4GB, with the first SRAM region located at address 0.
+ Newer SoCs map the boot ROM at address 0 instead and move the
+ SRAM to a different address.
+
+config SYS_BOARD
+ default "sunxi"
+
+config SYS_CLK_FREQ
+ default 408000000 if MACH_SUNIV
+ default 1008000000 if MACH_SUN4I
+ default 1008000000 if MACH_SUN5I
+ default 1008000000 if MACH_SUN6I
+ default 912000000 if MACH_SUN7I
+ default 1008000000 if MACH_SUN8I
+ default 1008000000 if MACH_SUN9I
+ default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
+ default 888000000 if MACH_SUN50I_H6
+ default 1008000000 if MACH_SUN50I_H616
+
+config SYS_CONFIG_NAME
+ default "suniv" if MACH_SUNIV
+ default "sun4i" if MACH_SUN4I
+ default "sun5i" if MACH_SUN5I
+ default "sun6i" if MACH_SUN6I
+ default "sun7i" if MACH_SUN7I
+ default "sun8i" if MACH_SUN8I
+ default "sun9i" if MACH_SUN9I
+ default "sun50i" if MACH_SUN50I
+ default "sun50i" if MACH_SUN50I_H6
+ default "sun50i" if MACH_SUN50I_H616
+
+config SYS_SOC
+ default "sunxi"
+
menu "sunxi board options"
choice
This keeps all of the defaults for sunxi platforms in one place. Most of these only depend on architecture-independent features of the SoC (clock tree or SRAM layout) anyway. No functional change; just some minor help text cleanup. Signed-off-by: Samuel Holland <samuel@sholland.org> --- arch/arm/mach-sunxi/Kconfig | 67 ------------------------------------ board/sunxi/Kconfig | 68 +++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 67 deletions(-)