Show patches with: State = Action Required       |   1464 patches
« 1 2 ... 8 9 1014 15 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot] gpio: zynq: Do not check unsigned type that is >= 0 [U-Boot] gpio: zynq: Do not check unsigned type that is >= 0 - - - - 0 0 0 2018-06-13 Michal Simek monstr New
[U-Boot] mmc: zynq: Fix tuning_loop_counter type in arasan_sdhci_execute_tuning() [U-Boot] mmc: zynq: Fix tuning_loop_counter type in arasan_sdhci_execute_tuning() - - - - 0 0 0 2018-06-13 Michal Simek monstr New
[U-Boot] arm64: zynqmp: Check return value from calloc [U-Boot] arm64: zynqmp: Check return value from calloc - - - - 0 0 0 2018-06-13 Michal Simek monstr New
[U-Boot] arm64: zynqmp: Check return value in zynqmp_mmio_rawwrite() [U-Boot] arm64: zynqmp: Check return value in zynqmp_mmio_rawwrite() - - - - 0 0 0 2018-06-13 Michal Simek monstr New
[U-Boot] microblaze: Add new syscalls io_pgetevents and rseq [U-Boot] microblaze: Add new syscalls io_pgetevents and rseq - - - - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot] spi: zynq_qspi: Fixed incorrect return value error [U-Boot] spi: zynq_qspi: Fixed incorrect return value error - - 1 - 0 0 0 2018-06-14 Vipul Kumar monstr New
[U-Boot,1/5] serial: zynq: Use BIT macros instead of shifts and full hex numbers serial: zynq: Fix serial driver - - 1 - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot,2/5] serial: zynq: Write chars till output fifo is full serial: zynq: Fix serial driver - - 1 - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot,3/5] serial: zynq: Initialize uart only before relocation serial: zynq: Fix serial driver - - 1 - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot,4/5] serial: zynq: Check priv pointer get via dev_get_priv() serial: zynq: Fix serial driver - - - - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot,5/5] serial: zynq: Make zynq_serial_setbrg static serial: zynq: Fix serial driver - - 1 - 0 0 0 2018-06-14 Michal Simek monstr New
[U-Boot] serial: zynq: Use platdata for storing static data instead of priv [U-Boot] serial: zynq: Use platdata for storing static data instead of priv - - 1 - 0 0 0 2018-06-15 Michal Simek monstr New
[U-Boot,v3,1/4] lib: fdtdec: Add new variable ram_start to global data [U-Boot,v3,1/4] lib: fdtdec: Add new variable ram_start to global data - - - - 0 0 0 2018-06-18 Siva Durga Prasad Paladugu monstr Needs Review / ACK
[U-Boot,v3,2/4] arm: zynq: Dont define SDRAM_BASE and SDRAM_SIZE in .h [U-Boot,v3,1/4] lib: fdtdec: Add new variable ram_start to global data - - - - 0 0 0 2018-06-18 Siva Durga Prasad Paladugu monstr New
[U-Boot,v3,3/4] arm: zynq: Add Nand flash mini u-boot configuration for zynq [U-Boot,v3,1/4] lib: fdtdec: Add new variable ram_start to global data - - - - 0 0 0 2018-06-18 Siva Durga Prasad Paladugu monstr New
[U-Boot,v3,4/4] arm: zynq: Add parallel NOR flash mini u-boot configuration for zynq [U-Boot,v3,1/4] lib: fdtdec: Add new variable ram_start to global data - - - - 0 0 0 2018-06-18 Siva Durga Prasad Paladugu monstr New
[U-Boot,v4] xilinx: zynq: Add support to secure images [U-Boot,v4] xilinx: zynq: Add support to secure images - - - - 0 0 0 2018-06-18 Siva Durga Prasad Paladugu monstr New
[U-Boot,v2,1/3] kbuild: Get rid of KBUILD_STR kbuild: always use relative path for __FILE__ - - - - 0 0 0 2017-10-13 Masahiro Yamada masahir0y New
[U-Boot,12/20] clk: uniphier: add peripheral clock data ARM: uniphier: various refactoring for v2017.11-rc2 - - - - 0 0 0 2017-10-13 Masahiro Yamada masahir0y New
[U-Boot,14/20] i2c: uniphier: use clk for enable and get_rate ARM: uniphier: various refactoring for v2017.11-rc2 - - 1 - 0 0 0 2017-10-13 Masahiro Yamada masahir0y New
[U-Boot,15/20] i2c: uniphier-f: use clk for enable and get_rate ARM: uniphier: various refactoring for v2017.11-rc2 - - 1 - 0 0 0 2017-10-13 Masahiro Yamada masahir0y New
[U-Boot] mtd: nand: denali: Replace the ad-hoc cache management with bouncebuf [U-Boot] mtd: nand: denali: Replace the ad-hoc cache management with bouncebuf - - - - 0 0 0 2018-06-07 Marek Vasut masahir0y New
[U-Boot,v3,01/11] ram: Add driver for MPC83xx [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,02/11] sysreset: Add get_status method [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,03/11] test: Add tests for sysreset_get_status [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,04/11] board_f: Add reset status printing [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,05/11] mpc83xx: Add sysreset driver [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,06/11] clk: Add MPC83xx clock driver [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - - - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,07/11] timer: Add MPC83xx timer driver [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - - - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,08/11] common: board_f: Sort includes [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,09/11] board_f: Use static print_cpuinfo if CONFIG_CPU is active [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,10/11] cpu: Add MPC83xx CPU driver [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - - - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot,v3,11/11] misc: Add MPC83xx serdes driver [U-Boot,v3,01/11] ram: Add driver for MPC83xx - - 1 - 0 0 0 2018-05-24 Mario Six mariosix New
[U-Boot] usb: kbd: Don't fail with iomux [U-Boot] usb: kbd: Don't fail with iomux - - 2 1 0 0 0 2017-09-27 Rob Clark marex New
[U-Boot] usb: kbd: Fix dangling pointers on probe fail [U-Boot] usb: kbd: Fix dangling pointers on probe fail - - - 1 0 0 0 2017-10-03 Rob Clark marex New
[U-Boot,v2,01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,02/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,03/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,04/14] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC Enable Stratix10 SoC support - - 1 - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,05/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,06/14] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,07/14] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,08/14] arm: dts: Add dts for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,09/14] arm: socfpga: Restructure the SPL file Enable Stratix10 SoC support - - 1 - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,10/14] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,11/14] arm: socfpga: stratix10: Add timer support for Stratix10 SoC Enable Stratix10 SoC support - - 1 - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,12/14] ddr: altera: stratix10: Add DDR support for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,13/14] board: altera: stratix10: Add socdk board support for Stratix10 SoC Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot,v2,14/14] arm: socfpga: stratix10: Enable Stratix10 SoC build Enable Stratix10 SoC support - - - - 0 0 0 2017-10-05 See, Chin Liang marex New
[U-Boot] cmd: usb_mass_storage: add protection for block_dev [U-Boot] cmd: usb_mass_storage: add protection for block_dev - - - - 0 0 0 2017-10-18 Patrick DELAUNAY marex New
[U-Boot,v7] cmd: usb: ignore blk, emulation devices in usb tree/info display [U-Boot,v7] cmd: usb: ignore blk, emulation devices in usb tree/info display - - 2 1 0 0 0 2017-10-24 Suneel Garapati marex New
[U-Boot,v3,1/3] usb: hub: identify the hub-device to usb_hub_reset_devices [U-Boot,v3,1/3] usb: hub: identify the hub-device to usb_hub_reset_devices - - 1 1 0 0 0 2017-11-22 Dr. Philipp Tomsich marex New
[U-Boot] arm socfpga: Revert "spi: cadence_qspi_apb: Support 32 bit AHB address" [U-Boot] arm socfpga: Revert "spi: cadence_qspi_apb: Support 32 bit AHB address" - - - - 0 0 0 2017-12-03 Frank Mori Hess marex New
[U-Boot] arm socfpga: Revert "spi: cadence_qspi_apb: Support 32 bit AHB address" [U-Boot] arm socfpga: Revert "spi: cadence_qspi_apb: Support 32 bit AHB address" - - - - 0 0 0 2017-12-03 Frank Mori Hess marex New
[U-Boot,05/15] pinctrl: rmobile: Add R8A77970 V3M PFC tables [U-Boot,01/15] ARM: rmobile: Add R8A77970 SoC - - - - 0 0 0 2017-12-07 Marek Vasut marex New
[U-Boot,06/15] pinctrl: rmobile: Add R8A77995 D3 PFC tables [U-Boot,01/15] ARM: rmobile: Add R8A77970 SoC - - - - 0 0 0 2017-12-07 Marek Vasut marex New
[U-Boot] ARM SOCFPGA: add resetmgr command so reset can be deasserted in bootcmd (for example on ... [U-Boot] ARM SOCFPGA: add resetmgr command so reset can be deasserted in bootcmd (for example on ... - - - - 0 0 0 2017-12-14 Frank Mori Hess marex New
[U-Boot] ARM SOCFPGA: add resetmgr command so reset can be deasserted in bootcmd (for example on ... [U-Boot] ARM SOCFPGA: add resetmgr command so reset can be deasserted in bootcmd (for example on ... - - - - 0 0 0 2017-12-14 Frank Mori Hess marex New
[U-Boot] config: Enable part command for socfpga platform [U-Boot] config: Enable part command for socfpga platform - - - - 0 0 0 2017-12-18 Andrey Zhizhikin marex New
[U-Boot,RESEND,v2,1/3] armv8: ls1012a: Add USB 2.0 controller phy type for ls1012aqds board [U-Boot,RESEND,v2,1/3] armv8: ls1012a: Add USB 2.0 controller phy type for ls1012aqds board - - - - 0 0 0 2017-12-20 Ran Wang marex New
[U-Boot,RESEND,v2,2/3] usb: ehci: fsl: Fix some compile warnings. [U-Boot,RESEND,v2,1/3] armv8: ls1012a: Add USB 2.0 controller phy type for ls1012aqds board - - - - 0 0 0 2017-12-20 Ran Wang marex New
[U-Boot,RESEND,v2,3/3] arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig [U-Boot,RESEND,v2,1/3] armv8: ls1012a: Add USB 2.0 controller phy type for ls1012aqds board - - - - 0 0 0 2017-12-20 Ran Wang marex New
[U-Boot] ARM: rmobile: Enable HS200 mode on RCar Gen3 [U-Boot] ARM: rmobile: Enable HS200 mode on RCar Gen3 - - - - 0 0 0 2018-01-06 Marek Vasut marex New
[U-Boot] ARM: rmobile: Enable HS200 mode on RCar Gen3 [U-Boot] ARM: rmobile: Enable HS200 mode on RCar Gen3 - - - - 0 0 0 2018-01-16 Marek Vasut marex New
[U-Boot] Fix build of socfpga targets when CONFIG_SPL is not set (i.e., you do not want to genera... [U-Boot] Fix build of socfpga targets when CONFIG_SPL is not set (i.e., you do not want to genera... - - - - 0 0 0 2018-01-24 Éric Hoffman marex New
[U-Boot,03/13] clk: renesas: Make PLL configurations per-SoC [U-Boot,01/13] clk: renesas: Split RCar Gen3 driver - - - - 0 0 0 2018-01-24 Marek Vasut marex New
[U-Boot,07/13] clk: renesas: Split out code shared between Gen2 and Gen3 [U-Boot,01/13] clk: renesas: Split RCar Gen3 driver - - - - 0 0 0 2018-01-24 Marek Vasut marex New
[U-Boot,RESEND] ddr: altera: silence PHY calibration unless in debug mode [U-Boot,RESEND] ddr: altera: silence PHY calibration unless in debug mode - - - - 0 0 0 2018-01-25 Simon Goldschmidt marex New
[U-Boot] usb: ehci: mxs: fix swapped argument in ehci_writel() [U-Boot] usb: ehci: mxs: fix swapped argument in ehci_writel() - - - - 0 0 0 2018-01-25 Daniel Schwierzeck marex New
[U-Boot,v1] EHCI: Fix endian access issue on EHCI intinalization [U-Boot,v1] EHCI: Fix endian access issue on EHCI intinalization - - - - 0 0 0 2018-01-29 Yinbo Zhu marex New
[U-Boot] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit [U-Boot] usb: dwc2: Fix logic for setup of GUSBCFG->ULPI_UTMI_Sel bit - - - - 0 0 0 2018-02-02 Alexey Brodkin marex New
[U-Boot,v4,01/34] usb: sunxi: Simplify ccm reg base code phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,02/34] musb: sunxi: Add proper macros instead of numericals phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,03/34] musb: sunxi: Use simple way to fill musb_hdrc pdata phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,04/34] musb: sunxi: Add fifo config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,05/34] sunxi: clock: Fix clock gating for H3/H5/A64 phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,06/34] musb: sunxi: Add OTG device clkgate and reset for H3/H5 phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,07/34] sunxi: clock: Fix OHCI clock gating for H3/H5 phy: sunxi: Add Allwinner sun4i USB PHY - - 1 - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,08/34] musb: sunxi: Add support for H3/H5A64 phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,09/34] phy: Add Allwinner A64 USB PHY driver phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,10/34] phy: sun4i-usb: Add id_detect and vbus_detect ops phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,11/34] phy: sun4i-usb: Add H3/H5 PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,12/34] phy: sun4i-usb: Add V3S PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,13/34] phy: sun4i-usb: Add A83T USB PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,14/34] phy: sun4i-usb: Add A10/A13/A20 PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,15/34] phy: sun4i-usb: Add A31 PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,16/34] phy: sun4i-usb: Add A33 USB PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,17/34] phy: sun4i-usb: Add A23 USB PHY config phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,18/34] device-tree-bindings: phy: Sync sun4i-usb-phy bindings phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,19/34] board: sunxi: Use generic-phy for board_usb_cable_connected phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,20/34] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,21/34] usb: sunxi: Switch to use generic-phy phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,22/34] sunxi: Drop legacy usb_phy.c phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,23/34] sunxi: h3: Sync OTG and HCI nodes from Linux DT phy: sunxi: Add Allwinner sun4i USB PHY - - 1 - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,24/34] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,25/34] configs: bananapi-m64: Enable USB OTG peripheral mode phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,26/34] ARM: dts: sun8i: a83t: Sync usbphy node from Linux phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,27/34] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,28/34] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
[U-Boot,v4,29/34] configs: bananapi-m2-plus: Enable USB OTG peripheral mode phy: sunxi: Add Allwinner sun4i USB PHY - - - - 0 0 0 2018-02-06 Jagan Teki marex New
« 1 2 ... 8 9 1014 15 »