Patchwork Linux PWM development

login
register
mail settings

Incoming patches

Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[GIT,PULL] pwm: Changes for v4.1-rc1 0 0 0 2015-04-23 Thierry Reding New
pwm: Add clk enable/disable for pwm_samsung_enable/pwm_samsung_disable 0 0 0 2015-04-14 Anand Moon New
[v6,4/4] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-04-10 Jonathan Richardson New
[v6,3/4] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-04-10 Jonathan Richardson New
[v6,2/4] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-04-10 Jonathan Richardson New
[v6,1/4] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-04-10 Jonathan Richardson New
[6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan 0 1 0 2015-03-26 Anand Moon New
[5/6] pwm: samsung: Fix output race on disabling 1 0 0 2015-03-26 Anand Moon New
[4/6] ARM: dts: OdroidXU3: Enable TMU at Exynos5422 base. 1 0 0 2015-03-26 Anand Moon New
[3/6] ARM:dts exynos5422 Update the thermal sensor for tmu_cpu0 0 0 0 2015-03-26 Anand Moon New
[2/6] ARM: dts exynos5420 update the cooling cells for core cpu0 1 0 0 2015-03-26 Anand Moon New
[1/6] ARM: dts :exynos5422-odroidxu3 Add pwm-fan node to the Odroid-XU3 board. 1 0 0 2015-03-26 Anand Moon New
[RESEND,v5] clk: Add PWM clock driver 0 0 1 2015-03-26 Philipp Zabel New
[16/35,linux-next] video: constify of_device_id array 1 0 0 2015-03-16 Fabian Frederick New
pwm: update lpss pwm driver to support Broxton platform 1 0 0 2015-03-12 qipeng.zha New
pwm: update lpss pwm driver to support Broxton platform 0 0 0 2015-03-12 qipeng.zha New
clk: provide clk_is_match() dummy for non-common clk 0 0 0 2015-03-12 Stephen Boyd New
pwm: update lpss pwm driver to support Broxton platform 0 0 0 2015-03-11 qipeng.zha New
[RESEND] pwm: mxs: fix period divider computation 1 0 0 2015-03-11 Gaetan Hug New
[v2,Resend] pwm: samsung: Fix output race on disabling 1 1 0 2015-03-05 Sjoerd Simons New
[2/2] backlight: pwm: Add backlight-boot-off property 0 0 0 2015-02-26 huang lin New
backlight: pwm: handle EPROBE_DEFER while requesting the PWM 1 0 0 2015-02-19 Nicolas Ferre New
[GIT,PULL] pwm: Changes for v3.20-rc1 0 0 0 2015-02-18 Thierry Reding New
[1/1] fixing pwm-mxs period divider computation 0 0 0 2015-02-18 Gaetan Hug New
[v5] clk: Add PWM clock driver 0 0 1 2015-02-13 Philipp Zabel New
[2/2] leds/pwm: Don't disable pwm when setting brightness to 0 0 0 1 2015-02-12 Uwe Kleine-König New
[1/2] pwm/doc: Clearify that the pin state after pwm_disable is undefined 0 0 0 2015-02-12 Uwe Kleine-König New
[RFC,2/2] leds: Add multi-LED driver for PWM driven multi-LED 0 0 0 2015-02-06 Sebastian Siewior New
[RFC,1/2] pwm: allow to fetch pwm via index 0 0 0 2015-02-06 Sebastian Siewior New
pwm: Delete an unnecessary check before the function call "of_node_put" 0 0 0 2015-02-03 SF Markus Elfring New
[v2,2/3] Documentation: DT bindings: add more Tegra chip compatible strings 2 0 0 2015-01-30 Paul Walmsley New
[RESEND] pwm: sti: Maintain a bitmap of configured devices 0 0 0 2015-01-29 Ajit Pal New
[09/24] Documentation: DT bindings: add more chip compatible strings for Tegra PWM 0 0 0 2015-01-28 Paul Walmsley New
Found bug in pwm-mxs.c 0 0 0 2015-01-27 Gaetan Hug New
[v2] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-22 Sjoerd Simons New
ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel 0 0 0 2015-01-20 Robby Cai New
[7/7] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan 0 0 0 2015-01-09 Andrew Lunn New
[6/7] arm: mvebu: Enable PWM in defconfig 0 0 0 2015-01-09 Andrew Lunn New
[5/7] mvebu: xp: Add pwm properties to .dtsi files 0 0 0 2015-01-09 Andrew Lunn New
[4/7] DT: bindings: Extend mvebu gpio documentation with PWM 0 0 0 2015-01-09 Andrew Lunn New
[3/7] gpio: mvebu: Add limited PWM support 0 0 0 2015-01-09 Andrew Lunn New
[2/7] gpio: mvebu: Fix probe cleanup on error 0 0 0 2015-01-09 Andrew Lunn New
[1/7] gpio: mvebu: checkpatch fixes 0 0 0 2015-01-09 Andrew Lunn New
[RESEND] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-07 Sjoerd Simons New
[v5,2/2] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-01-07 Jonathan Richardson New
[v5,1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-01-07 Jonathan Richardson New
[2/2] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-01-05 Tim Kryger New
[1/2] drivers: pwm: core: Add pwmchip_add_inversed 1 0 0 2015-01-05 Tim Kryger New
[v4,2/3] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-30 Jonathan Richardson New
[PATCHv10,2/2] pwm: sunxi: document OF bindings 1 0 0 2014-12-17 Alexandre Belloni New
[PATCHv10,1/2] pwm: Add Allwinner SoC support 1 0 0 2014-12-17 Alexandre Belloni New
[v3,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-17 Jonathan Richardson New
[v3,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-17 Jonathan Richardson New
pwm: samsung: Fix output race on disabling 0 0 0 2014-12-17 Sjoerd Simons New
[v2,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-11 Jonathan Richardson New
[v2,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-11 Jonathan Richardson New
[v2,1/4] pwm: kona: Remove setting default smooth type and polarity for all channels 0 0 0 2014-12-06 Tim Kryger New
[v6,4/4] DT: pdm: Add binding document for IMG PDM DAC 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,3/4] pdm: Imagination Technologies PDM DAC driver 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,2/4] DT: pwm: Add binding document for IMG PWM DAC 0 1 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,1/4] pwm: Imagination Technologies PWM DAC driver 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[5/5] pwm: remove of_pwm_xlate_with_flags() function 0 0 0 2014-11-18 Vladimir Zapolskiy New
[4/5] pwm: do not set of_pwm_xlate_with_flags() as a callback 0 0 0 2014-11-18 Vladimir Zapolskiy New
[3/5] pwm: set the actual number of pwms arguments defined in board dts 0 0 0 2014-11-18 Vladimir Zapolskiy New
[2/5] pwm: push up dynamic printk level on errors in of_pwm_get() 0 0 0 2014-11-18 Vladimir Zapolskiy New
[1/5] pwm: process pwm polarity argument in of_pwm_simple_xlate() 0 0 0 2014-11-18 Vladimir Zapolskiy New
pwm: sti: Maintain a bitmap of configured devices 0 0 0 2014-11-11 Ajit Pal New
[2/2] backlight: pwm: clean up pwm requested using legacy API 1 0 0 2014-10-11 Vladimir Zapolskiy New
[1/2] backlight: pwm: don't call legacy pwm request for device defined in dt 0 0 0 2014-10-11 Vladimir Zapolskiy New
[3/3] pwm: set the actual number of pwms arguments defined in board dts 0 0 0 2014-10-10 Vladimir Zapolskiy New
[2/3] pwm: push up dynamic printk level on errors in of_pwm_get() 0 0 0 2014-10-10 Vladimir Zapolskiy New
[1/3] pwm: process pwm polarity argument in of_pwm_simple_xlate() 0 0 0 2014-10-10 Vladimir Zapolskiy New
[3/3] pwm: imx: support output polarity inversion 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv6,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv6,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv5,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 0 0 2014-10-09 Thierry Reding New
[PATCHv5,3/3] pwm: imx: support output polarity inversion 1 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 1 0 2014-10-07 Lothar Waßmann New
[1/1] Atmel-PWM: Fixed the PWM channel enable/disable issue which will cause the PWM output stop working after reenable. THe PWM channel status register is read to ensure the PWM channel is really enabled or disabled. 0 0 0 2014-10-01 ryang New
[RFC] pwm: Add the concept of an "active" pinctrl 0 0 0 2014-09-23 Doug Anderson New
[1/1] PWM-atmel: Fixed a bug which set the pwm clock prescaler incorrectly. In the defect code the prescaler was always one more than expected value, which resulted in the pwm output with wrong frequency and duty cycle. 0 0 0 2014-09-10 ryang New
[V4] pwm: lpc32xx - Add a driver for the motor PWM 0 0 0 2014-09-10 Alban Bedel New
This adds a generic PWM framework driver for the PWM controller 0 0 0 2014-08-18 Jon Smirl New
[2/2] pwm: new fields, max and resolution, added to sysfs 0 0 0 2014-08-05 Aurelio Colosimo New
[1/2] pwm: new field name added to pwm_device 0 0 0 2014-08-05 Aurelio Colosimo New
[RFC] pwm: omap: Add PWM driver for OMAP using dual-mode timers 0 0 0 2014-05-02 Joachim Eastwood New
PWM: Enable driver compilation with COMPILE_TEST 0 0 0 2014-04-16 Axel Lin New
video: pwm backlight: power off when necessary 0 0 0 2014-02-26 Liu Ying New
[v3,5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected 0 0 0 2014-02-05 Matt Porter Under Review
backlight: add PWM dependencies 0 0 0 2014-02-04 Linus Walleij New
ARM: pxa: Add dummy backlight power supply on Mitac Mio A701 0 0 1 2014-02-01 Robert Jarzmik New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-24 Sascha Hauer New
[PATCHv2,2/2] pwm: imx: support polarity inversion 0 0 0 2014-01-23 Russell King - ARM Linux New
[2/2] PWM: handle additional flags in of_pwm_simple_xlate 0 0 0 2014-01-23 Sascha Hauer New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-23 Sascha Hauer New