Patchwork Linux PWM development

login
register
mail settings

Incoming patches

« Previous 1 2 Next »
Filters: State = Action Required remove filter
Patch A/R/T Date Submitter Delegate State
[v8,5/5] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-05-26 Jonathan Richardson New
[v8,4/5] pwm: kona: Add debug info to config function 0 0 0 2015-05-26 Jonathan Richardson New
[v8,3/5] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-05-26 Jonathan Richardson New
[v8,2/5] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-05-26 Jonathan Richardson New
[v8,1/5] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-05-26 Jonathan Richardson New
[PATCHv2,2/2] PWM: atmel: fix incorrect CDTY value after disabling 1 0 0 2015-05-25 Alexandre Belloni New
[14/21] pwm: Probe PWM chip devices on demand 0 0 0 2015-05-25 Tomeu Vizoso New
[2/2] PWM: atmel: fix incorrect CDTY value after disabling 0 0 0 2015-05-25 Alexandre Belloni New
[1/2] PWM: atmel: fix incorrect CDTY value after enabling 1 0 0 2015-05-25 Alexandre Belloni New
[v2,2/2] pwm: add MediaTek display PWM driver support 0 0 0 2015-05-21 YH Huang New
[v2,1/2] dt-bindings: pwm: add MediaTek display PWM bindings 0 0 0 2015-05-21 YH Huang New
[v4,2/2] pwm: Add support for R-Car PWM Timer 0 0 0 2015-05-21 Yoshihiro Shimoda New
[v4,1/2] pwm: Add device tree binding document for R-Car PWM Timer 1 0 0 2015-05-21 Yoshihiro Shimoda New
[GIT,PULL] pwm: Fixes for v4.1-rc5 0 0 0 2015-05-19 Thierry Reding New
backlight: pwm_bl: Simplify usage of devm_gpiod_get_optional 1 0 0 2015-05-16 Axel Lin New
[v7,5/5] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-05-12 Jonathan Richardson New
[v7,4/5] pwm: kona: Add debug info to config function 0 0 0 2015-05-12 Jonathan Richardson New
[v7,3/5] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-05-12 Jonathan Richardson New
[v7,2/5] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-05-12 Jonathan Richardson New
[v7,1/5] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-05-12 Jonathan Richardson New
[v2] pwm: img: Impose upper and lower timebase steps value 0 0 0 2015-05-08 Ezequiel Garcia New
pwm: img: Change min and max timebase steps value 0 0 0 2015-05-07 Ezequiel Garcia New
[v6,3/4] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 0 0 2015-05-07 Tim Kryger New
[6/8] pwm: crc: Add Crystalcove (CRC) PWM driver 0 0 0 2015-05-05 Shobhit Kumar New
[5/8] mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-05-05 Shobhit Kumar New
[4/8] mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC 1 0 0 2015-05-05 Shobhit Kumar New
[3/8] mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal 2 0 0 2015-05-05 Shobhit Kumar New
[2/8] pwm: core: Add support to remove registered consumer lookup tables 0 0 0 2015-05-05 Shobhit Kumar New
[1/8] gpiolib: Add support for removing registered consumer lookup table 0 1 0 2015-05-05 Shobhit Kumar New
[8/8] drm/i915: Backlight control using CRC PMIC based PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[7/8] drm/i915: Use the CRC gpio for panel enable/disable 1 1 0 2015-04-29 Shobhit Kumar New
[6/8] drivers/pwm: Add Crystalcove (CRC) PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[5/8] drivers/mfd: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-04-29 Shobhit Kumar New
[4/8] drivers/mfd: Add PWM cell device for Crystalcove PMIC 0 0 0 2015-04-29 Shobhit Kumar New
[3/8] drivers/mfd: Add lookup table for Panel Control as GPIO signal 1 0 0 2015-04-29 Shobhit Kumar New
[2/8] drivers/pwm/core: Add support to remove registered consumer lookup tables 0 0 0 2015-04-29 Shobhit Kumar New
[1/8] drivers/gpio/gpiolib: Add support for removing registered consumer lookup table 0 2 0 2015-04-29 Shobhit Kumar New
[GIT,PULL] pwm: Changes for v4.1-rc1 0 0 0 2015-04-23 Thierry Reding New
pwm: Add clk enable/disable for pwm_samsung_enable/pwm_samsung_disable 0 0 0 2015-04-14 Anand Moon New
[v6,4/4] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-04-10 Jonathan Richardson New
[v6,3/4] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-04-10 Jonathan Richardson New
[v6,2/4] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-04-10 Jonathan Richardson New
[v6,1/4] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-04-10 Jonathan Richardson New
[6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan 0 1 0 2015-03-26 Anand Moon New
[5/6] pwm: samsung: Fix output race on disabling 1 0 0 2015-03-26 Anand Moon New
[4/6] ARM: dts: OdroidXU3: Enable TMU at Exynos5422 base. 1 0 0 2015-03-26 Anand Moon New
[3/6] ARM:dts exynos5422 Update the thermal sensor for tmu_cpu0 0 0 0 2015-03-26 Anand Moon New
[2/6] ARM: dts exynos5420 update the cooling cells for core cpu0 1 0 0 2015-03-26 Anand Moon New
[1/6] ARM: dts :exynos5422-odroidxu3 Add pwm-fan node to the Odroid-XU3 board. 1 0 0 2015-03-26 Anand Moon New
[RESEND,v5] clk: Add PWM clock driver 0 0 1 2015-03-26 Philipp Zabel New
[16/35,linux-next] video: constify of_device_id array 1 0 0 2015-03-16 Fabian Frederick New
pwm: update lpss pwm driver to support Broxton platform 1 0 0 2015-03-12 qipeng.zha New
pwm: update lpss pwm driver to support Broxton platform 0 0 0 2015-03-12 qipeng.zha New
clk: provide clk_is_match() dummy for non-common clk 0 0 0 2015-03-12 Stephen Boyd New
pwm: update lpss pwm driver to support Broxton platform 0 0 0 2015-03-11 qipeng.zha New
[RESEND] pwm: mxs: fix period divider computation 1 0 0 2015-03-11 Gaetan Hug New
[v2,Resend] pwm: samsung: Fix output race on disabling 1 1 0 2015-03-05 Sjoerd Simons New
[2/2] backlight: pwm: Add backlight-boot-off property 0 0 0 2015-02-26 huang lin New
backlight: pwm: handle EPROBE_DEFER while requesting the PWM 1 0 0 2015-02-19 Nicolas Ferre New
[GIT,PULL] pwm: Changes for v3.20-rc1 0 0 0 2015-02-18 Thierry Reding New
[1/1] fixing pwm-mxs period divider computation 0 0 0 2015-02-18 Gaetan Hug New
[v5] clk: Add PWM clock driver 0 0 1 2015-02-13 Philipp Zabel New
[2/2] leds/pwm: Don't disable pwm when setting brightness to 0 0 0 1 2015-02-12 Uwe Kleine-König New
[1/2] pwm/doc: Clearify that the pin state after pwm_disable is undefined 0 0 0 2015-02-12 Uwe Kleine-König New
[RFC,2/2] leds: Add multi-LED driver for PWM driven multi-LED 0 0 0 2015-02-06 Sebastian Siewior New
[RFC,1/2] pwm: allow to fetch pwm via index 0 0 0 2015-02-06 Sebastian Siewior New
pwm: Delete an unnecessary check before the function call "of_node_put" 0 0 0 2015-02-03 SF Markus Elfring New
[v2,2/3] Documentation: DT bindings: add more Tegra chip compatible strings 2 0 0 2015-01-30 Paul Walmsley New
[RESEND] pwm: sti: Maintain a bitmap of configured devices 0 0 0 2015-01-29 Ajit Pal New
[09/24] Documentation: DT bindings: add more chip compatible strings for Tegra PWM 0 0 0 2015-01-28 Paul Walmsley New
Found bug in pwm-mxs.c 0 0 0 2015-01-27 Gaetan Hug New
[v2] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-22 Sjoerd Simons New
ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel 0 0 0 2015-01-20 Robby Cai New
[7/7] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan 0 0 0 2015-01-09 Andrew Lunn New
[6/7] arm: mvebu: Enable PWM in defconfig 0 0 0 2015-01-09 Andrew Lunn New
[5/7] mvebu: xp: Add pwm properties to .dtsi files 0 0 0 2015-01-09 Andrew Lunn New
[4/7] DT: bindings: Extend mvebu gpio documentation with PWM 0 0 0 2015-01-09 Andrew Lunn New
[3/7] gpio: mvebu: Add limited PWM support 0 0 0 2015-01-09 Andrew Lunn New
[2/7] gpio: mvebu: Fix probe cleanup on error 0 0 0 2015-01-09 Andrew Lunn New
[1/7] gpio: mvebu: checkpatch fixes 0 0 0 2015-01-09 Andrew Lunn New
[RESEND] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-07 Sjoerd Simons New
[v5,2/2] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-01-07 Jonathan Richardson New
[v5,1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-01-07 Jonathan Richardson New
[2/2] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-01-05 Tim Kryger New
[1/2] drivers: pwm: core: Add pwmchip_add_inversed 1 0 0 2015-01-05 Tim Kryger New
[v4,2/3] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-30 Jonathan Richardson New
[PATCHv10,2/2] pwm: sunxi: document OF bindings 1 0 0 2014-12-17 Alexandre Belloni New
[PATCHv10,1/2] pwm: Add Allwinner SoC support 1 0 0 2014-12-17 Alexandre Belloni New
[v3,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-17 Jonathan Richardson New
[v3,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-17 Jonathan Richardson New
pwm: samsung: Fix output race on disabling 0 0 0 2014-12-17 Sjoerd Simons New
[v2,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-11 Jonathan Richardson New
[v2,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-11 Jonathan Richardson New
[v2,1/4] pwm: kona: Remove setting default smooth type and polarity for all channels 0 0 0 2014-12-06 Tim Kryger New
[v6,4/4] DT: pdm: Add binding document for IMG PDM DAC 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,3/4] pdm: Imagination Technologies PDM DAC driver 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,2/4] DT: pwm: Add binding document for IMG PWM DAC 0 1 0 2014-11-28 naidu.tellapati@gmail.com New
[v6,1/4] pwm: Imagination Technologies PWM DAC driver 0 0 0 2014-11-28 naidu.tellapati@gmail.com New
[5/5] pwm: remove of_pwm_xlate_with_flags() function 0 0 0 2014-11-18 Vladimir Zapolskiy New
[4/5] pwm: do not set of_pwm_xlate_with_flags() as a callback 0 0 0 2014-11-18 Vladimir Zapolskiy New
« Previous 1 2 Next »