Patchwork Linux PWM development

login
register
mail settings

Incoming patches

« Previous 1 2 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel 0 0 0 2015-01-20 Robby Cai New
ARM: pxa: Add dummy backlight power supply on Mitac Mio A701 0 0 1 2014-02-01 Robert Jarzmik New
Found bug in pwm-mxs.c 0 0 0 2015-01-27 Gaetan Hug New
PWM: Enable driver compilation with COMPILE_TEST 0 0 0 2014-04-16 Axel Lin New
This adds a generic PWM framework driver for the PWM controller 0 0 0 2014-08-18 Jon Smirl New
[09/24] Documentation: DT bindings: add more chip compatible strings for Tegra PWM 0 0 0 2015-01-28 Paul Walmsley New
[1/1] Atmel-PWM: Fixed the PWM channel enable/disable issue which will cause the PWM output stop working after reenable. THe PWM channel status register is read to ensure the PWM channel is really enabled or disabled. 0 0 0 2014-10-01 ryang New
[1/1] PWM-atmel: Fixed a bug which set the pwm clock prescaler incorrectly. In the defect code the prescaler was always one more than expected value, which resulted in the pwm output with wrong frequency and duty cycle. 0 0 0 2014-09-10 ryang New
[1/1] fixing pwm-mxs period divider computation 0 0 0 2015-02-18 Gaetan Hug New
[1/2] PWM: atmel: fix incorrect CDTY value after enabling 1 0 0 2015-05-25 Alexandre Belloni New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-24 Sascha Hauer New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-23 Sascha Hauer New
[1/2] backlight: pwm: don't call legacy pwm request for device defined in dt 0 0 0 2014-10-11 Vladimir Zapolskiy New
[1/2] drivers: pwm: core: Add pwmchip_add_inversed 1 0 0 2015-01-05 Tim Kryger New
[1/2] pwm/doc: Clearify that the pin state after pwm_disable is undefined 0 0 0 2015-02-12 Uwe Kleine-König New
[1/2] pwm: new field name added to pwm_device 0 0 0 2014-08-05 Aurelio Colosimo New
[1/3] pwm: process pwm polarity argument in of_pwm_simple_xlate() 0 0 0 2014-10-10 Vladimir Zapolskiy New
[1/5] pwm: process pwm polarity argument in of_pwm_simple_xlate() 0 0 0 2014-11-18 Vladimir Zapolskiy New
[1/6] ARM: dts :exynos5422-odroidxu3 Add pwm-fan node to the Odroid-XU3 board. 1 0 0 2015-03-26 Anand Moon New
[1/7] gpio: mvebu: checkpatch fixes 0 0 0 2015-01-09 Andrew Lunn New
[1/8] drivers/gpio/gpiolib: Add support for removing registered consumer lookup table 0 2 0 2015-04-29 Shobhit Kumar New
[1/8] gpiolib: Add support for removing registered consumer lookup table 0 1 0 2015-05-05 Shobhit Kumar New
[14/21] pwm: Probe PWM chip devices on demand 0 0 0 2015-05-25 Tomeu Vizoso New
[16/35,linux-next] video: constify of_device_id array 1 0 0 2015-03-16 Fabian Frederick New
[2/2] PWM: atmel: fix incorrect CDTY value after disabling 0 0 0 2015-05-25 Alexandre Belloni New
[2/2] PWM: handle additional flags in of_pwm_simple_xlate 0 0 0 2014-01-23 Sascha Hauer New
[2/2] backlight: pwm: Add backlight-boot-off property 0 0 0 2015-02-26 huang lin New
[2/2] backlight: pwm: clean up pwm requested using legacy API 1 0 0 2014-10-11 Vladimir Zapolskiy New
[2/2] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-01-05 Tim Kryger New
[2/2] leds/pwm: Don't disable pwm when setting brightness to 0 0 0 1 2015-02-12 Uwe Kleine-König New
[2/2] pwm: new fields, max and resolution, added to sysfs 0 0 0 2014-08-05 Aurelio Colosimo New
[2/3] pwm: push up dynamic printk level on errors in of_pwm_get() 0 0 0 2014-10-10 Vladimir Zapolskiy New
[2/5] pwm: push up dynamic printk level on errors in of_pwm_get() 0 0 0 2014-11-18 Vladimir Zapolskiy New
[2/6] ARM: dts exynos5420 update the cooling cells for core cpu0 1 0 0 2015-03-26 Anand Moon New
[2/7] gpio: mvebu: Fix probe cleanup on error 0 0 0 2015-01-09 Andrew Lunn New
[2/8] drivers/pwm/core: Add support to remove registered consumer lookup tables 0 0 0 2015-04-29 Shobhit Kumar New
[2/8] pwm: core: Add support to remove registered consumer lookup tables 0 0 0 2015-05-05 Shobhit Kumar New
[3/3] pwm: imx: support output polarity inversion 0 0 0 2014-10-10 Lothar Waßmann New
[3/3] pwm: set the actual number of pwms arguments defined in board dts 0 0 0 2014-10-10 Vladimir Zapolskiy New
[3/5] pwm: set the actual number of pwms arguments defined in board dts 0 0 0 2014-11-18 Vladimir Zapolskiy New
[3/6] ARM:dts exynos5422 Update the thermal sensor for tmu_cpu0 0 0 0 2015-03-26 Anand Moon New
[3/7] gpio: mvebu: Add limited PWM support 0 0 0 2015-01-09 Andrew Lunn New
[3/8] drivers/mfd: Add lookup table for Panel Control as GPIO signal 1 0 0 2015-04-29 Shobhit Kumar New
[3/8] mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal 2 0 0 2015-05-05 Shobhit Kumar New
[4/5] pwm: do not set of_pwm_xlate_with_flags() as a callback 0 0 0 2014-11-18 Vladimir Zapolskiy New
[4/6] ARM: dts: OdroidXU3: Enable TMU at Exynos5422 base. 1 0 0 2015-03-26 Anand Moon New
[4/7] DT: bindings: Extend mvebu gpio documentation with PWM 0 0 0 2015-01-09 Andrew Lunn New
[4/8] drivers/mfd: Add PWM cell device for Crystalcove PMIC 0 0 0 2015-04-29 Shobhit Kumar New
[4/8] mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC 1 0 0 2015-05-05 Shobhit Kumar New
[5/5] pwm: remove of_pwm_xlate_with_flags() function 0 0 0 2014-11-18 Vladimir Zapolskiy New
[5/6] pwm: samsung: Fix output race on disabling 1 0 0 2015-03-26 Anand Moon New
[5/7] mvebu: xp: Add pwm properties to .dtsi files 0 0 0 2015-01-09 Andrew Lunn New
[5/8] drivers/mfd: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-04-29 Shobhit Kumar New
[5/8] mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-05-05 Shobhit Kumar New
[6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan 0 1 0 2015-03-26 Anand Moon New
[6/7] arm: mvebu: Enable PWM in defconfig 0 0 0 2015-01-09 Andrew Lunn New
[6/8] drivers/pwm: Add Crystalcove (CRC) PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[6/8] pwm: crc: Add Crystalcove (CRC) PWM driver 0 0 0 2015-05-05 Shobhit Kumar New
[7/7] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan 0 0 0 2015-01-09 Andrew Lunn New
[7/8] drm/i915: Use the CRC gpio for panel enable/disable 1 1 0 2015-04-29 Shobhit Kumar New
[8/8] drm/i915: Backlight control using CRC PMIC based PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[GIT,PULL] pwm: Changes for v3.20-rc1 0 0 0 2015-02-18 Thierry Reding New
[GIT,PULL] pwm: Changes for v4.1-rc1 0 0 0 2015-04-23 Thierry Reding New
[GIT,PULL] pwm: Fixes for v4.1-rc5 0 0 0 2015-05-19 Thierry Reding New
[PATCHv10,1/2] pwm: Add Allwinner SoC support 1 0 0 2014-12-17 Alexandre Belloni New
[PATCHv10,2/2] pwm: sunxi: document OF bindings 1 0 0 2014-12-17 Alexandre Belloni New
[PATCHv2,2/2] PWM: atmel: fix incorrect CDTY value after disabling 1 0 0 2015-05-25 Alexandre Belloni New
[PATCHv2,2/2] pwm: imx: support polarity inversion 0 0 0 2014-01-23 Russell King - ARM Linux New
[PATCHv5,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 0 0 2014-10-09 Thierry Reding New
[PATCHv5,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,3/3] pwm: imx: support output polarity inversion 1 1 0 2014-10-07 Lothar Waßmann New
[PATCHv6,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv6,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 0 0 2014-10-10 Lothar Waßmann New
[RESEND,v5] clk: Add PWM clock driver 0 0 1 2015-03-26 Philipp Zabel New
[RESEND] pwm: mxs: fix period divider computation 1 0 0 2015-03-11 Gaetan Hug New
[RESEND] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-07 Sjoerd Simons New
[RESEND] pwm: sti: Maintain a bitmap of configured devices 0 0 0 2015-01-29 Ajit Pal New
[RFC,1/2] pwm: allow to fetch pwm via index 0 0 0 2015-02-06 Sebastian Siewior New
[RFC,2/2] leds: Add multi-LED driver for PWM driven multi-LED 0 0 0 2015-02-06 Sebastian Siewior New
[RFC] pwm: Add the concept of an "active" pinctrl 0 0 0 2014-09-23 Doug Anderson New
[RFC] pwm: omap: Add PWM driver for OMAP using dual-mode timers 0 0 0 2014-05-02 Joachim Eastwood New
[V4] pwm: lpc32xx - Add a driver for the motor PWM 0 0 0 2014-09-10 Alban Bedel New
[v2,1/2] dt-bindings: pwm: add MediaTek display PWM bindings 0 0 0 2015-05-21 YH Huang New
[v2,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-11 Jonathan Richardson New
[v2,1/4] pwm: kona: Remove setting default smooth type and polarity for all channels 0 0 0 2014-12-06 Tim Kryger New
[v2,2/2] pwm: add MediaTek display PWM driver support 0 0 0 2015-05-21 YH Huang New
[v2,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-11 Jonathan Richardson New
[v2,2/3] Documentation: DT bindings: add more Tegra chip compatible strings 2 0 0 2015-01-30 Paul Walmsley New
[v2,Resend] pwm: samsung: Fix output race on disabling 1 1 0 2015-03-05 Sjoerd Simons New
[v2] pwm: img: Impose upper and lower timebase steps value 0 0 0 2015-05-08 Ezequiel Garcia New
[v2] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-22 Sjoerd Simons New
[v3,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-17 Jonathan Richardson New
[v3,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-17 Jonathan Richardson New
[v3,5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected 0 0 0 2014-02-05 Matt Porter Under Review
[v4,1/2] pwm: Add device tree binding document for R-Car PWM Timer 1 0 0 2015-05-21 Yoshihiro Shimoda New
[v4,2/2] pwm: Add support for R-Car PWM Timer 0 0 0 2015-05-21 Yoshihiro Shimoda New
[v4,2/3] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-30 Jonathan Richardson New
[v5,1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-01-07 Jonathan Richardson New
[v5,2/2] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-01-07 Jonathan Richardson New
« Previous 1 2 Next »