Patchwork Linux PWM development

login
register
mail settings

Incoming patches

« Previous 1 2 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[RESEND] pwm: sti: Maintain a bitmap of configured devices 0 0 0 2015-01-29 Ajit Pal New
pwm: sti: Maintain a bitmap of configured devices 0 0 0 2014-11-11 Ajit Pal New
[V4] pwm: lpc32xx - Add a driver for the motor PWM 0 0 0 2014-09-10 Alban Bedel New
[PATCHv2,2/2] PWM: atmel: fix incorrect CDTY value after disabling 1 0 0 2015-05-25 Alexandre Belloni New
[2/2] PWM: atmel: fix incorrect CDTY value after disabling 0 0 0 2015-05-25 Alexandre Belloni New
[1/2] PWM: atmel: fix incorrect CDTY value after enabling 1 0 0 2015-05-25 Alexandre Belloni New
[PATCHv10,2/2] pwm: sunxi: document OF bindings 1 0 0 2014-12-17 Alexandre Belloni New
[PATCHv10,1/2] pwm: Add Allwinner SoC support 1 0 0 2014-12-17 Alexandre Belloni New
pwm: Add clk enable/disable for pwm_samsung_enable/pwm_samsung_disable 0 0 0 2015-04-14 Anand Moon New
[6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan 0 1 0 2015-03-26 Anand Moon New
[5/6] pwm: samsung: Fix output race on disabling 1 0 0 2015-03-26 Anand Moon New
[4/6] ARM: dts: OdroidXU3: Enable TMU at Exynos5422 base. 1 0 0 2015-03-26 Anand Moon New
[3/6] ARM:dts exynos5422 Update the thermal sensor for tmu_cpu0 0 0 0 2015-03-26 Anand Moon New
[2/6] ARM: dts exynos5420 update the cooling cells for core cpu0 1 0 0 2015-03-26 Anand Moon New
[1/6] ARM: dts :exynos5422-odroidxu3 Add pwm-fan node to the Odroid-XU3 board. 1 0 0 2015-03-26 Anand Moon New
[7/7] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan 0 0 0 2015-01-09 Andrew Lunn New
[6/7] arm: mvebu: Enable PWM in defconfig 0 0 0 2015-01-09 Andrew Lunn New
[5/7] mvebu: xp: Add pwm properties to .dtsi files 0 0 0 2015-01-09 Andrew Lunn New
[4/7] DT: bindings: Extend mvebu gpio documentation with PWM 0 0 0 2015-01-09 Andrew Lunn New
[3/7] gpio: mvebu: Add limited PWM support 0 0 0 2015-01-09 Andrew Lunn New
[2/7] gpio: mvebu: Fix probe cleanup on error 0 0 0 2015-01-09 Andrew Lunn New
[1/7] gpio: mvebu: checkpatch fixes 0 0 0 2015-01-09 Andrew Lunn New
[2/2] pwm: new fields, max and resolution, added to sysfs 0 0 0 2014-08-05 Aurelio Colosimo New
[1/2] pwm: new field name added to pwm_device 0 0 0 2014-08-05 Aurelio Colosimo New
backlight: pwm_bl: Simplify usage of devm_gpiod_get_optional 1 0 0 2015-05-16 Axel Lin New
PWM: Enable driver compilation with COMPILE_TEST 0 0 0 2014-04-16 Axel Lin New
[RFC] pwm: Add the concept of an "active" pinctrl 0 0 0 2014-09-23 Doug Anderson New
[v2] pwm: img: Impose upper and lower timebase steps value 0 0 0 2015-05-08 Ezequiel Garcia New
pwm: img: Change min and max timebase steps value 0 0 0 2015-05-07 Ezequiel Garcia New
[16/35,linux-next] video: constify of_device_id array 1 0 0 2015-03-16 Fabian Frederick New
[RESEND] pwm: mxs: fix period divider computation 1 0 0 2015-03-11 Gaetan Hug New
[1/1] fixing pwm-mxs period divider computation 0 0 0 2015-02-18 Gaetan Hug New
Found bug in pwm-mxs.c 0 0 0 2015-01-27 Gaetan Hug New
[RFC] pwm: omap: Add PWM driver for OMAP using dual-mode timers 0 0 0 2014-05-02 Joachim Eastwood New
This adds a generic PWM framework driver for the PWM controller 0 0 0 2014-08-18 Jon Smirl New
[v8,5/5] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-05-26 Jonathan Richardson New
[v8,4/5] pwm: kona: Add debug info to config function 0 0 0 2015-05-26 Jonathan Richardson New
[v8,3/5] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-05-26 Jonathan Richardson New
[v8,2/5] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-05-26 Jonathan Richardson New
[v8,1/5] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-05-26 Jonathan Richardson New
[v7,5/5] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-05-12 Jonathan Richardson New
[v7,4/5] pwm: kona: Add debug info to config function 0 0 0 2015-05-12 Jonathan Richardson New
[v7,3/5] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-05-12 Jonathan Richardson New
[v7,2/5] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-05-12 Jonathan Richardson New
[v7,1/5] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-05-12 Jonathan Richardson New
[v6,4/4] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-04-10 Jonathan Richardson New
[v6,3/4] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-04-10 Jonathan Richardson New
[v6,2/4] drivers: pwm: bcm-kona: Dont set polarity in probe 0 1 0 2015-04-10 Jonathan Richardson New
[v6,1/4] drivers: pwm: core: Add pwmchip_add_inversed 0 0 0 2015-04-10 Jonathan Richardson New
[v5,2/2] pwm: core: Set enable state properly on failed call to enable 0 1 1 2015-01-07 Jonathan Richardson New
[v5,1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures 0 2 1 2015-01-07 Jonathan Richardson New
[v4,2/3] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-30 Jonathan Richardson New
[v3,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-17 Jonathan Richardson New
[v3,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-17 Jonathan Richardson New
[v2,2/2] pwm: kona: Remove setting default smooth type and polarity for all channels 0 1 1 2014-12-11 Jonathan Richardson New
[v2,1/2] pwm: kona: Fix incorrect enable, config, and disable procedures 0 2 1 2014-12-11 Jonathan Richardson New
backlight: add PWM dependencies 0 0 0 2014-02-04 Linus Walleij New
video: pwm backlight: power off when necessary 0 0 0 2014-02-26 Liu Ying New
[3/3] pwm: imx: support output polarity inversion 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv6,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv6,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 0 0 2014-10-10 Lothar Waßmann New
[PATCHv5,3/3] pwm: imx: support output polarity inversion 1 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,2/3] pwm: make the PWM_POLARITY flag in DTB optional 0 1 0 2014-10-07 Lothar Waßmann New
[PATCHv5,1/3] pwm: print error messages with pr_err() instead of pr_debug() 0 1 0 2014-10-07 Lothar Waßmann New
[v3,5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected 0 0 0 2014-02-05 Matt Porter Under Review
backlight: pwm: handle EPROBE_DEFER while requesting the PWM 1 0 0 2015-02-19 Nicolas Ferre New
[v2,2/3] Documentation: DT bindings: add more Tegra chip compatible strings 2 0 0 2015-01-30 Paul Walmsley New
[09/24] Documentation: DT bindings: add more chip compatible strings for Tegra PWM 0 0 0 2015-01-28 Paul Walmsley New
[RESEND,v5] clk: Add PWM clock driver 0 0 1 2015-03-26 Philipp Zabel New
[v5] clk: Add PWM clock driver 0 0 1 2015-02-13 Philipp Zabel New
ARM: dts: imx6qdl: Adjust the brightness setting for LVDS panel 0 0 0 2015-01-20 Robby Cai New
ARM: pxa: Add dummy backlight power supply on Mitac Mio A701 0 0 1 2014-02-01 Robert Jarzmik New
[PATCHv2,2/2] pwm: imx: support polarity inversion 0 0 0 2014-01-23 Russell King - ARM Linux New
pwm: Delete an unnecessary check before the function call "of_node_put" 0 0 0 2015-02-03 SF Markus Elfring New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-24 Sascha Hauer New
[2/2] PWM: handle additional flags in of_pwm_simple_xlate 0 0 0 2014-01-23 Sascha Hauer New
[1/2] PWM: let of_xlate handlers check args count 0 0 0 2014-01-23 Sascha Hauer New
[RFC,2/2] leds: Add multi-LED driver for PWM driven multi-LED 0 0 0 2015-02-06 Sebastian Siewior New
[RFC,1/2] pwm: allow to fetch pwm via index 0 0 0 2015-02-06 Sebastian Siewior New
[6/8] pwm: crc: Add Crystalcove (CRC) PWM driver 0 0 0 2015-05-05 Shobhit Kumar New
[5/8] mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-05-05 Shobhit Kumar New
[4/8] mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC 1 0 0 2015-05-05 Shobhit Kumar New
[3/8] mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal 2 0 0 2015-05-05 Shobhit Kumar New
[2/8] pwm: core: Add support to remove registered consumer lookup tables 0 0 0 2015-05-05 Shobhit Kumar New
[1/8] gpiolib: Add support for removing registered consumer lookup table 0 1 0 2015-05-05 Shobhit Kumar New
[8/8] drm/i915: Backlight control using CRC PMIC based PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[7/8] drm/i915: Use the CRC gpio for panel enable/disable 1 1 0 2015-04-29 Shobhit Kumar New
[6/8] drivers/pwm: Add Crystalcove (CRC) PWM driver 0 0 0 2015-04-29 Shobhit Kumar New
[5/8] drivers/mfd: ADD PWM lookup table for CRC PMIC based PWM 1 0 0 2015-04-29 Shobhit Kumar New
[4/8] drivers/mfd: Add PWM cell device for Crystalcove PMIC 0 0 0 2015-04-29 Shobhit Kumar New
[3/8] drivers/mfd: Add lookup table for Panel Control as GPIO signal 1 0 0 2015-04-29 Shobhit Kumar New
[2/8] drivers/pwm/core: Add support to remove registered consumer lookup tables 0 0 0 2015-04-29 Shobhit Kumar New
[1/8] drivers/gpio/gpiolib: Add support for removing registered consumer lookup table 0 2 0 2015-04-29 Shobhit Kumar New
[v2,Resend] pwm: samsung: Fix output race on disabling 1 1 0 2015-03-05 Sjoerd Simons New
[v2] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-22 Sjoerd Simons New
[RESEND] pwm: samsung: Fix output race on disabling 0 0 0 2015-01-07 Sjoerd Simons New
pwm: samsung: Fix output race on disabling 0 0 0 2014-12-17 Sjoerd Simons New
clk: provide clk_is_match() dummy for non-common clk 0 0 0 2015-03-12 Stephen Boyd New
[GIT,PULL] pwm: Fixes for v4.1-rc5 0 0 0 2015-05-19 Thierry Reding New
[GIT,PULL] pwm: Changes for v4.1-rc1 0 0 0 2015-04-23 Thierry Reding New
« Previous 1 2 Next »