Show patches with: Submitter = Paul Kocialkowski       |    Archived = No       |   266 patches
« 1 2 3 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,4/4] sunxi: Add defconfig for the BananaPi with BL035 LCD module [U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high - - - - --- 2018-10-06 Paul Kocialkowski jagan Changes Requested
[U-Boot,3/4] sunxi: display: Also use the PWM controller for backlight on sun7i [U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high - - - - --- 2018-10-06 Paul Kocialkowski jagan Changes Requested
[U-Boot,2/4] sunxi: display: Add support for panels with an active-low DE signal [U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high - - - - --- 2018-10-06 Paul Kocialkowski jagan Changes Requested
[U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high [U-Boot,1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high 1 - - - --- 2018-10-06 Paul Kocialkowski jagan Changes Requested
[U-Boot] configs: Lower Lamobo R1 DRAM clock rate to 384 MHz [U-Boot] configs: Lower Lamobo R1 DRAM clock rate to 384 MHz - - - - --- 2018-06-15 Paul Kocialkowski jagan Changes Requested
[U-Boot,3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig [U-Boot,1/3] arm: dts: sun7i: Update Ainol AW1 dts - - - - --- 2018-03-25 Paul Kocialkowski jagan Changes Requested
[U-Boot,2/3] sunxi: Add USB0 ID detection pin to Ainol AW1 defconfig [U-Boot,1/3] arm: dts: sun7i: Update Ainol AW1 dts - - - - --- 2018-03-25 Paul Kocialkowski jagan Changes Requested
[U-Boot,1/3] arm: dts: sun7i: Update Ainol AW1 dts [U-Boot,1/3] arm: dts: sun7i: Update Ainol AW1 dts - - - - --- 2018-03-25 Paul Kocialkowski jagan Changes Requested
[U-Boot] tools: Include U-Boot libfdt headers from their actual path [U-Boot] tools: Include U-Boot libfdt headers from their actual path - - - - --- 2018-03-02 Paul Kocialkowski trini Accepted
[U-Boot] binman: Explicitly request python2 instead of python from env - - 1 - --- 2017-02-20 Paul Kocialkowski trini Accepted
[U-Boot,v2,3/3] spl: Rework image header parse to allow abort on raw image and os boot - - 1 - --- 2016-08-24 Paul Kocialkowski trini Accepted
[U-Boot,v2,2/3] panda: Initialize MMC power from TWL6030 in SPL - - 1 - --- 2016-08-24 Paul Kocialkowski trini Accepted
[U-Boot,v2,1/3] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL - - 1 - --- 2016-08-24 Paul Kocialkowski trini Accepted
[U-Boot,2/2] panda: Initialize MMC power from TWL6030 in SPL - - - - --- 2016-08-24 Paul Kocialkowski trini Superseded
[U-Boot,1/2] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL - - 1 - --- 2016-08-24 Paul Kocialkowski trini Superseded
[U-Boot,v2,7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,6/7] kc1: Proper reboot mode and boot reason validation - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,5/7] sniper: Proper reboot mode and boot reason validation - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,4/7] kc1: Add some sysboot and devicetree-related environment variables - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,3/7] kc1: Select libfdt to allow running devicetree-based kernels - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,2/7] kc1: Include explicit serial baudrate on bootargs - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,v2,1/7] sniper: Include explicit serial baudrate on bootargs - - - - --- 2016-03-29 Paul Kocialkowski trini Accepted
[U-Boot,7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix - - - - --- 2016-03-28 Paul Kocialkowski trini Changes Requested
[U-Boot,6/7] kc1: Proper reboot mode and boot reason validation - - 1 - --- 2016-03-28 Paul Kocialkowski trini Accepted
[U-Boot,5/7] sniper: Proper reboot mode and boot reason validation - - 1 - --- 2016-03-28 Paul Kocialkowski trini Accepted
[U-Boot,4/7] kc1: Add some sysboot and devicetree-related environment variables - - 1 - --- 2016-03-28 Paul Kocialkowski trini Changes Requested
[U-Boot,3/7] kc1: Select libfdt to allow running devicetree-based kernels - - 1 - --- 2016-03-28 Paul Kocialkowski trini Changes Requested
[U-Boot,2/7] kc1: Include explicit serial baudrate on bootargs - - 1 - --- 2016-03-28 Paul Kocialkowski trini Changes Requested
[U-Boot,1/7] sniper: Include explicit serial baudrate on bootargs - - 1 - --- 2016-03-28 Paul Kocialkowski trini Changes Requested
[U-Boot,6/6] kc1: Add some sysboot and devicetree-related environment variables - - - - --- 2016-03-26 Paul Kocialkowski trini Accepted
[U-Boot,5/6] kc1: Select libfdt to allow running devicetree-based kernels - - 1 - --- 2016-03-26 Paul Kocialkowski trini Changes Requested
[U-Boot,4/6] kc1: Include explicit serial baudrate on bootargs - - 1 - --- 2016-03-26 Paul Kocialkowski trini Accepted
[U-Boot,3/6] sniper: Include explicit serial baudrate on bootargs - - 1 - --- 2016-03-26 Paul Kocialkowski trini Accepted
[U-Boot,2/6] kc1: Move PXE file address to a viable location - - - - --- 2016-03-26 Paul Kocialkowski trini Changes Requested
[U-Boot,1/6] sniper: Move PXE file address to a viable location - - - - --- 2016-03-26 Paul Kocialkowski trini Changes Requested
[U-Boot,4/4] sniper: Clear reboot mode garbage on cold reset - - 1 - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,3/4] sniper: Get rid of reset_misc - - 1 - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,2/4] omap3: Use a define for reboot reason offset - - 1 - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,1/4] omap3: String-based reboot mode handling - - 1 - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,27/27] kc1: Clear reboot mode garbage on cold reset - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,26/27] kc1: Power off when the power on reason is not a valid one - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,25/27] input: TWL6030 input support for power button, USB and charger - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,24/27] power: twl6030: Power off support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,23/27] power: twl6030: Remove ifdef around the code - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,22/27] kc1: Boot to bootloader (fastboot) on ID pin pull-up - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,21/27] kc1: OMAP4 reboot mode support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,20/27] omap4: Check warm reset for reboot mode validity - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,19/27] omap4: Reboot mode support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,18/27] kc1: MUSB USB controller and fastboot USB gadget support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,17/27] usb: musb-new: omap2430: OMAP4 MUSB USB controller support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,16/27] power: twl6030: Clear VUSB_IN_PMID bit on USB device setup - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,15/27] power: twl6030: Configure VUSB voltage on USB device setup - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,14/27] omap4: Properly enable USB PHY clocks - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,13/27] omap-common: clocks-common: Setup USB DPLL when MUSB is in use - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,12/27] Amazon Kindle Fire (first generation) codename kc1 support - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,11/27] omap4: Move i2c clocks enable to enable_basic_clocks - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,10/27] omap4: Remove duplicate CM_L3INIT_USBPHY_CLKCTRL reference and whitespace - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,09/27] omap-common: Remove deprecated arch_cpu_init code - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,08/27] omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,07/27] omap4: Export jedec sdram timings - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,06/27] omap4: Export elpidia sdram timings - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,05/27] omap4: Export elpidia sdram device details - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,04/27] omap_hsmmc: Board-specific TWL6030 MMC power initialization - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,03/27] power: twl6030: Device-index-specific MMC power initialization - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,02/27] power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 value - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot,01/27] power: twl6030: Some more explicit registers and values definitions - - - - --- 2016-02-27 Paul Kocialkowski trini Accepted
[U-Boot] sniper: Various minor cleanups, missing Kconfig configs and reorganisation - - 1 - --- 2016-02-26 Paul Kocialkowski trini Accepted
[U-Boot] sniper: Drop references to P970 - - 1 - --- 2016-02-07 Paul Kocialkowski trini Accepted
[U-Boot,2/2] sniper: Mux configuration cleanup - - - - --- 2015-12-23 Paul Kocialkowski trini Accepted
[U-Boot,1/2] sniper: Various boot-related env settings, devicetree support - - - - --- 2015-12-23 Paul Kocialkowski trini Accepted
[U-Boot,7/7] omap-common: Common get_board_serial function to pass serial through ATAG - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,6/7] omap-common: Common function to display die id, replacing omap3-specific version - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,5/7] omap-common: Common serial and usbethaddr functions based on die id - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,4/7] omap5: omap_die_id support - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,3/7] omap4: omap_die_id support - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,2/7] omap3: omap_die_id support - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,1/7] omap-common: Common omap_die_id definition - - 1 - --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot,v2] omap-common: SYS_BOOT fallback logic correction and support for more devices 1 - - 1 --- 2015-08-27 Paul Kocialkowski trini Accepted
[U-Boot] omap-common: SYS_BOOT fallback logic correction - - 1 - --- 2015-08-25 Paul Kocialkowski trini Superseded
[U-Boot,v2,11/11] usb: USB storage-specific part ifdef in uclass - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,10/11] sunxi: MUSB gadget config provisions, with fastboot and USB mass storage support - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,09/11] musb: sunxi: Force EP0 on re-enable - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,08/11] sunxi: config update to stick with Kconfig changes - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,07/11] usb: USB_KEYBOARD move to usb Kconfig and USB peripherals support on USB_HCD - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,06/11] usb: USB_HCD Kconfig option for host controllers - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,05/11] sunxi: usb: USB_MUSB_SUNXI move to musb-new Kconfig - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,04/11] usb: musb-new: Kconfig support for USB_MUSB_HOST and USB_MUSB_GADGET - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,03/11] usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,02/11] usb: Generic USB Kconfig option, that fits both host and gadget and comments - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2,01/11] usb: USB_ARCH_HAS_HCD Kconfig option removal - - - - --- 2015-07-29 Paul Kocialkowski marex Superseded
[U-Boot,v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH - - - - --- 2015-07-26 Paul Kocialkowski trini Accepted
[U-Boot,12/12] sunxi: MUSB gadget config provisions, with fastboot and USB mass storage support 1 - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,11/12] musb: sunxi: Force EP0 on re-enable 1 - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,10/12] sunxi: config update to stick with Kconfig changes - - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,09/12] sunxi: Kconfig defaults for USB - - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,08/12] sunxi: USB EHCI Kconfig option instead of config define - - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,07/12] usb: USB_KEYBOARD move to usb Kconfig - - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,06/12] usb: USB_MUSB_SUNXI move to musb-new Kconfig 1 - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,05/12] usb: USB comments in Kconfig for better separation 1 - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
[U-Boot,04/12] usb: musb-new: Kconfig support for USB_MUSB_HOST and USB_MUSB_GADGET 1 - - - --- 2015-07-22 Paul Kocialkowski marex Superseded
« 1 2 3 »