Show patches with: Submitter = Stefan Agner       |   353 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,v2] arm: build arch memset/memcpy in Thumb2 mode - - 1 1 --- 2014-11-21 Stefan Agner aaribaud Superseded
[U-Boot] arm: make arch memset/memcpy to work with Thumb2 builds - - - - --- 2014-11-19 Stefan Agner aaribaud Superseded
[U-Boot,RESEND] vf610twr: Tune DDR initialization settings - - - - --- 2014-09-06 Stefan Agner aaribaud Accepted
[U-Boot,4/4] arm: vf610: add NAND support for vf610twr - - - - --- 2014-08-06 Stefan Agner aaribaud Accepted
[U-Boot] arm: vf610: add DDR_SEL_PAD_CONTR register - - - - --- 2014-04-23 Stefan Agner aaribaud Accepted
[U-Boot,4/4] arm: vf610: fix double iomux configuration for vf610twr board - - - - --- 2014-03-11 Stefan Agner aaribaud Accepted
[U-Boot,3/4] arm: vf610: add enet1 support - - - - --- 2014-03-11 Stefan Agner aaribaud Accepted
[U-Boot,2/4] arm: vf610: add uart0 clock/iomux definitions - - - - --- 2014-03-11 Stefan Agner aaribaud Accepted
[U-Boot,1/4] arm: vf610: fix anadig register struct - - - - --- 2014-03-11 Stefan Agner aaribaud Accepted
usb: xhci-brcm: Include header file needed for dev_err usb: xhci-brcm: Include header file needed for dev_err - 1 - - --- 2021-10-05 Stefan Agner bmeng Superseded
[U-Boot,v1] cmd: ubi: print load size after establishing volume size [U-Boot,v1] cmd: ubi: print load size after establishing volume size - - - - --- 2018-06-25 Stefan Agner hs Accepted
[U-Boot] cmd: net: flush cache cacheline aligned - - 1 1 --- 2016-08-02 Stefan Agner jhersh Rejected
[U-Boot,2/2] net: increase maximum frame size to accomediate VLAN packets 1 - 1 - --- 2016-04-13 Stefan Agner jhersh Accepted
[U-Boot,1/2] net: fix vlan validation 1 - 1 - --- 2016-04-13 Stefan Agner jhersh Accepted
[U-Boot,2/2] net: increase maximum frame size to accomediate VLAN packets - - - - --- 2016-04-12 Stefan Agner jhersh Changes Requested
[U-Boot,1/2] net: fix vlan validation - - - - --- 2016-04-12 Stefan Agner jhersh Accepted
[U-Boot] net: phy: do not read configuration register on reset 2 - 1 - --- 2015-12-09 Stefan Agner jhersh Accepted
arm64: dts: rockchip: rk3568: Add ODROID-M1 board support arm64: dts: rockchip: rk3568: Add ODROID-M1 board support - - - - --- 2023-07-05 Stefan Agner kevery Superseded
[2/2] rockchip: dts: tinker: remove unnecessary node [1/2] rockchip: dts: tinker: move i2c node to shared device tree - - 1 - --- 2020-09-04 Stefan Agner kevery Accepted
[1/2] rockchip: dts: tinker: move i2c node to shared device tree [1/2] rockchip: dts: tinker: move i2c node to shared device tree - - 1 - --- 2020-09-04 Stefan Agner kevery Accepted
usb: xhci: reset endpoint on USB stall usb: xhci: reset endpoint on USB stall - - 1 - --- 2021-09-27 Stefan Agner marex Accepted
[U-Boot] usb: ehci-mx6: allow board_ehci_hcd_init to fail - - - - --- 2016-05-05 Stefan Agner marex Accepted
[v2] arm64: dts: meson: odroidc2: readd PHY reset properties [v2] arm64: dts: meson: odroidc2: readd PHY reset properties - 1 - - --- 2021-04-08 Stefan Agner narmstrong Accepted
arm64: dts: meson: odroidc2: readd PHY reset properties arm64: dts: meson: odroidc2: readd PHY reset properties - 1 - - --- 2021-04-07 Stefan Agner narmstrong Changes Requested
arm64: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: fix PHY deassert timing requirements - 1 - - --- 2021-04-06 Stefan Agner narmstrong Changes Requested
mmc: meson-gx: change clock phase value on AGX SoCs mmc: meson-gx: change clock phase value on AGX SoCs - - - - --- 2020-12-07 Stefan Agner narmstrong Accepted
[2/2] meson: Add soc_rev to environment [1/2] ARM: meson: isolate loading of socinfo - - 1 - --- 2020-11-27 Stefan Agner narmstrong Accepted
[1/2] ARM: meson: isolate loading of socinfo [1/2] ARM: meson: isolate loading of socinfo - - 1 - --- 2020-11-27 Stefan Agner narmstrong Accepted
samsung: common: ignore if CROS EC is not supported samsung: common: ignore if CROS EC is not supported - - 1 - --- 2023-02-15 Stefan Agner prom Handled Elsewhere
[U-Boot,v2,11/11] configs: add default configuraiton for Colibri iMX7 with eMMC arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-08 Stefan Agner sbabic Accepted
[U-Boot,v2,10/11] configs: colibri_imx7: use distro defaults arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,09/11] configs: colibri_imx7: use DFU for NAND instead of MMC arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-08 Stefan Agner sbabic Accepted
[U-Boot,v2,08/11] configs: colibri_imx7: enable CAAM driver arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,07/11] colibri_imx7: drop legacy usdhc support arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,06/11] configs: colibri_imx7: use DM_MMC arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-08 Stefan Agner sbabic Accepted
[U-Boot,v2,04/11] configs: colibri_imx7: use separate device tree arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,03/11] configs: colibri_imx7: enable DM for raw NAND devices arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,01/11] colibri_imx7: fix boot commands arm: Colibri iMX7 fixes and DM_MMC conversion 1 1 - - --- 2019-01-08 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v1,9/9] configs: add default configuraiton for Colibri iMX7 with eMMC arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,8/9] configs: colibri_imx7: enable CAAM driver arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,7/9] colibri_imx7: drop legacy usdhc support arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,6/9] configs: colibri_imx7: use DM_MMC arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,5/9] arm: dts: imx7: colibri: add usdhci peripherals to device tree arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,4/9] configs: colibri_imx7: use separate device tree arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,3/9] configs: colibri_imx7: enable DM for raw NAND devices arm: Colibri iMX7 fixes and DM_MMC conversion - - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,2/9] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices arm: Colibri iMX7 fixes and DM_MMC conversion 1 - - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1,1/9] colibri_imx7: fix boot commands arm: Colibri iMX7 fixes and DM_MMC conversion 1 1 - - --- 2019-01-06 Stefan Agner sbabic Superseded
[U-Boot,v1] ARM: vf610: ddrmc: program Dummy DDRBYTE1/2 [U-Boot,v1] ARM: vf610: ddrmc: program Dummy DDRBYTE1/2 - - - - --- 2018-12-14 Stefan Agner sbabic Accepted
[U-Boot,v1] board: toradex: colibri_vf: unset NFS and LOADS/B [U-Boot,v1] board: toradex: colibri_vf: unset NFS and LOADS/B - - 1 - --- 2018-12-06 Stefan Agner sbabic Accepted
[U-Boot,v1,4/4] ARM: vf610: ddrmc: do not write CR79 by default ddr: vybrid: various fixes 1 - 1 - --- 2018-12-04 Stefan Agner sbabic Accepted
[U-Boot,v1,3/4] ARM: vf610: ddrmc: fix initialization completion detection ddr: vybrid: various fixes 1 - - - --- 2018-12-04 Stefan Agner sbabic Accepted
[U-Boot,v1,2/4] ARM: vf610: ddrmc: fix CR138 preprocessor define ddr: vybrid: various fixes 1 - 1 - --- 2018-12-04 Stefan Agner sbabic Accepted
[U-Boot,v1,1/4] toradex: colibri_vf: fix memory initialization ddr: vybrid: various fixes 1 1 - - --- 2018-12-04 Stefan Agner sbabic Accepted
[U-Boot,v1,2/2] colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support [U-Boot,v1,1/2] board: toradex: common: fail gracefully on missing NAND chip - - - - --- 2018-08-06 Stefan Agner sbabic Accepted
[U-Boot,v1,1/2] board: toradex: common: fail gracefully on missing NAND chip [U-Boot,v1,1/2] board: toradex: common: fail gracefully on missing NAND chip - - - - --- 2018-08-06 Stefan Agner sbabic Accepted
[U-Boot,v1,2/2] colibri_imx7: improve DDR3 timing [U-Boot,v1,1/2] colibri_imx7: add compatible string used in vanilla Linux 1 - - - --- 2018-06-26 Stefan Agner sbabic Accepted
[U-Boot,v1,1/2] colibri_imx7: add compatible string used in vanilla Linux [U-Boot,v1,1/2] colibri_imx7: add compatible string used in vanilla Linux - - - - --- 2018-06-26 Stefan Agner sbabic Accepted
[U-Boot,v1,5/5] imx: mx7: psci: implement MIGRATE_INFO_TYPE [U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs - - - - --- 2018-06-24 Stefan Agner sbabic Accepted
[U-Boot,v1,4/5] imx: mx7: psci: support CPU0 on/off [U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs - - - - --- 2018-06-24 Stefan Agner sbabic Accepted
[U-Boot,v1,3/5] imx: mx7: psci: provide complete PSCI 1.0 implementation [U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs - 1 - - --- 2018-06-24 Stefan Agner sbabic Accepted
[U-Boot,v1,2/5] imx: mx7: psci: use C code exclusively [U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs - - - - --- 2018-06-24 Stefan Agner sbabic Accepted
[U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs [U-Boot,v1,1/5] ARM: PSCI: initialize stack pointer on secondary CPUs 1 1 - 1 --- 2018-06-24 Stefan Agner sbabic Accepted
[U-Boot,v2,9/9] arm: dts: imx7: colibri: add raw NAND support mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,8/9] arm: dts: imx7: sync with Linux mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,7/9] mtd: nand: mxs_nand: add support for specific ECC strength mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v2,6/9] mtd: nand: mxs_nand: add device tree support mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v2,5/9] mtd: nand: mxs_nand: move structs into header file mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v2,4/9] mtd: nand: mxs_nand: add use_minimum_ecc to struct mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v2,3/9] mtd: nand: mxs_nand: separate board/controller init mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v2,2/9] mtd: nand: mxs_nand: use more precise function name mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v2,1/9] mtd: nand: mxs_nand: move register structs to driver data mtd: nand: mxs_nand: add device tree support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v4,6/6] mtd: nand: mxs_nand: add minimal ECC support mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v4,5/6] mtd: nand: mxs_nand: report correct ECC parameters mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v4,4/6] mtd: nand: mxs_nand: use structure for BCH geometry mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v4,3/6] mtd: nand: mxs_nand: allow to enable BBT support mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v4,2/6] mtd: nand: mxs_nand: use self init mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v4,1/6] mtd: nand: mxs_nand: introduce SPL specific init mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-06-22 Stefan Agner sbabic Accepted
[U-Boot,v1,5/5] board: toradex: add Colibri iMX6ULL support board: toradex: add Colibri iMX6ULL support - - - - --- 2018-05-30 Stefan Agner sbabic Accepted
[U-Boot,v1,4/5] board: toradex: add new and upcoming SKUs board: toradex: add Colibri iMX6ULL support - - - - --- 2018-05-30 Stefan Agner sbabic Accepted
[U-Boot,v1,3/5] ARM: dts: imx6ull: use same compatible string as Linux is using board: toradex: add Colibri iMX6ULL support - - - - --- 2018-05-30 Stefan Agner sbabic Accepted
[U-Boot,v1,2/5] imx: add macro to detect whether USB has been initialized board: toradex: add Colibri iMX6ULL support 1 - - - --- 2018-05-30 Stefan Agner sbabic Accepted
[U-Boot,v1,1/5] mtd: nand: mxs_nand: add device tree support for i.MX 6 board: toradex: add Colibri iMX6ULL support - - - - --- 2018-05-30 Stefan Agner sbabic Awaiting Upstream
[U-Boot,v1,9/9] arm: dts: imx7: colibri: add raw NAND support mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,8/9] arm: dts: imx7: sync with Linux mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,7/9] mtd: nand: mxs_nand: add support for specific ECC strength mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,6/9] mtd: nand: mxs_nand: add device tree support mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,5/9] mtd: nand: mxs_nand: create separate header file mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,4/9] mtd: nand: mxs_nand: add use_minimum_ecc to struct mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,3/9] mtd: nand: mxs_nand: separate board/controller init mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,2/9] mtd: nand: mxs_nand: use more precise function name mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v1,1/9] mtd: nand: mxs_nand: move register structs to driver data mtd: nand: mxs_nand: add device tree support - - - - --- 2018-04-20 Stefan Agner sbabic Changes Requested
[U-Boot,v3,5/5] mtd: nand: mxs_nand: add minimal ECC support mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-04-11 Stefan Agner sbabic Changes Requested
[U-Boot,v3,4/5] mtd: nand: mxs_nand: report correct ECC parameters mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-04-11 Stefan Agner sbabic Changes Requested
[U-Boot,v3,3/5] mtd: nand: mxs_nand: use structure for BCH geometry mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-04-11 Stefan Agner sbabic Changes Requested
[U-Boot,v3,2/5] mtd: nand: mxs_nand: allow to enable BBT support mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-04-11 Stefan Agner sbabic Changes Requested
[U-Boot,v3,1/5] mtd: nand: mxs_nand: use self init mtd: nand: mxs_nand: improve ECC support - - - - --- 2018-04-11 Stefan Agner sbabic Changes Requested
[U-Boot,RFC] cmd_writebcb_mx7: add command to write FCB and DBBT for i.MX 7 [U-Boot,RFC] cmd_writebcb_mx7: add command to write FCB and DBBT for i.MX 7 1 - - - --- 2018-04-11 Stefan Agner sbabic RFC
[U-Boot,RFC] imx: add writebcb command [U-Boot,RFC] imx: add writebcb command 1 - - - --- 2018-04-11 Stefan Agner sbabic RFC
« 1 2 3 4 »