Show patches with: none      |   179188 patches
« 1 2 ... 1338 1339 1340 … 1791 1792 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,2/8] ARM: highbank: add reset support for Calxeda Midway machine - - - - --- 2015-06-04 Andre Przywara trini Accepted
[U-Boot,1/8] ARM: highbank: add missing SCU register setup for reset - - - - --- 2015-06-04 Andre Przywara trini Accepted
[U-Boot] spi: cf_qspi: fix clamp macro type check compilation warnings - - - - --- 2015-06-04 Angelo Dureghello jagan Superseded
[U-Boot,v2,5/5] arm: imx6: tqma6: implement KConfig baseboard selection - - - - --- 2015-06-04 Markus Niebel sbabic Awaiting Upstream
[U-Boot,v2,4/5] arm: imx6: tqma6: boot device selection via Kconfig - - - - --- 2015-06-04 Markus Niebel sbabic Awaiting Upstream
[U-Boot,v2,3/5] arm: imx6: tqma6: implement IMX_CONFIG with Kconfig - - - - --- 2015-06-04 Markus Niebel sbabic Awaiting Upstream
[U-Boot,v2,2/5] arm: mx6: tqma6: CPU type selection via Kconfig - - - - --- 2015-06-04 Markus Niebel sbabic Awaiting Upstream
[U-Boot,v2,1/5] arm: imx6: tqma6: add kconfig to board header - - - - --- 2015-06-04 Markus Niebel sbabic Awaiting Upstream
[U-Boot] x86: WIP: Enable D0 stepping microcode for MinnowMax - - - - --- 2015-06-04 Bin Meng sjg Changes Requested
[U-Boot] x86: baytrail: Add BayTrail-I D0 stepping microcode - - - - --- 2015-06-04 Bin Meng sjg Changes Requested
[U-Boot,10/10] ARM: BeagleBoard-x15: Add mux data - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,09/10] ARM: BeagleBoard-x15: Enable IO delay recalibration sequence - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,08/10] ARM: DRA7: CPSW: Remove IO delay hack - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,07/10] ARM: DRA7-evm: Add mux data - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,06/10] ARM: DRA7-evm: Enable IO delay recalibration sequence - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,05/10] ARM: DRA7: Add support for manual mode configuration - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,04/10] ARM: DRA7: Add support for IO delay configuration - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,03/10] ARM: DRA7: Add support for virtual mode configuration - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,02/10] ARM: DRA7: Add pinctrl register definitions - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,01/10] ARM: DRA7: Make do_set_mux32() generic - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,v2,3/3] x86: fsp: Move FspInitEntry call to board_init_f() 1 - - 3 --- 2015-06-04 Bin Meng sjg Superseded
[U-Boot,v2,2/3] x86: fsp: Load GDT before calling FspInitEntry - - - 2 --- 2015-06-04 Bin Meng sjg Superseded
[U-Boot,v2,1/3] x86: Add Kconfig options to be used by arch/x86/cpu/config.mk 1 - - 2 --- 2015-06-04 Bin Meng sjg Superseded
[U-Boot,PATCHv3,1/1] board: Add Toby-Churchill SL50 board support. - - - - --- 2015-06-04 Enric Balletbo Serra trini Changes Requested
[U-Boot,v2] ARM: phytec: pcm051: select board revision by Kconfig - - - - --- 2015-06-04 Lars Poeschel trini Changes Requested
[U-Boot] ARM: DRA7: emif: Fix DDR init sequence during warm reset - - - - --- 2015-06-04 Lokesh Vutla trini Accepted
[U-Boot,2/2] arm/ls102xa: Add PSCI support for ls102xa 1 - - - --- 2015-06-04 Dongsheng Wang yorksun Accepted
[U-Boot,1/2] ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S - - 1 - --- 2015-06-04 Dongsheng Wang yorksun Accepted
[U-Boot,4/4] T210: Add support for T210-based P2571 board - - - - --- 2015-06-03 Tom Warren tomcwarren Superseded
[U-Boot,3/4] P2571: dts: Add DT files for Tegra210/P2571 board - - - - --- 2015-06-03 Tom Warren tomcwarren Superseded
[U-Boot,2/4] ARM: Tegra210: Add support to common Tegra source/config files - - - - --- 2015-06-03 Tom Warren tomcwarren Superseded
[U-Boot,1/4] ARM: Tegra210: Add SoC code/include files for T210 - - - - --- 2015-06-03 Tom Warren tomcwarren Superseded
[U-Boot] sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default 1 - - - --- 2015-06-03 Hans de Goede jwrdegoede Accepted
[U-Boot] omap-common: Common boot code OMAP3 support and cleanup - - - - --- 2015-06-03 Paul Kocialkowski Superseded
[U-Boot,RFC] omap-common: Common boot code OMAP3 support and cleanup - - - - --- 2015-06-03 Paul Kocialkowski Superseded
[U-Boot] spl: spl_mmc: Minor cosmetics - - - - --- 2015-06-03 Paul Kocialkowski trini Accepted
[U-Boot,v3] x86: baytrail: pci region 3 is not always mapped to end of ram 1 - 1 - --- 2015-06-03 Andrew Bradford sjg Accepted
[U-Boot,v2] x86: baytrail: pci region 3 is not always mapped to end of ram - - - - --- 2015-06-03 Andrew Bradford sjg Superseded
[U-Boot] Merrii_A80_Optimus: Fix build error - - - - --- 2015-06-03 maxin.john@enea.com jwrdegoede Superseded
[U-Boot] x86: WIP: Enable debug UART for Minnowmax - - 1 - --- 2015-06-03 Simon Glass sjg Superseded
[U-Boot,v2] ARM: DRA7xx: EMIF: Fix DLL_CALIB_CTRL register - - - - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot] ARM: DRA7xx: EMIF: Fix DLL_CALIB_CTRL register - - - - --- 2015-06-03 Lokesh Vutla trini Superseded
[U-Boot,2/2] ot1200: setup i2c bus 1 in setup_iomux_i2c() - - - - --- 2015-06-03 Christian Gmeiner sbabic Awaiting Upstream
[U-Boot,1/2] ot1200: setup i2c bus in board_early_init_f(..) - - - - --- 2015-06-03 Christian Gmeiner sbabic Awaiting Upstream
[U-Boot,v1,12/12] arm: mvebu: db-88f6820: Add SPL support with DDR init code - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,11/12] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,10/12] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,09/12] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,08/12] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,07/12] Makefile: Fix mvebu build target to use SPL load and exe-address - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,06/12] arm: mvebu: Disable L2 cache before enabling d-cache - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,05/12] arm: mvebu: Disable MMU before changing register base address - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,04/12] arm: mvebu: spl.c: Add call to board_early_init_f() - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,03/12] arm: mvebu: Use default reg base address for SPL on A38x - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,02/12] tools/kwboot: Add parameters to set delay and timeout via cmdline - - - - --- 2015-06-03 Stefan Roese stroese Superseded
[U-Boot,v1,01/12] tools/kwbimage.c: Correct header size for SPI boot - - - - --- 2015-06-03 Stefan Roese prafulla@marvell.com Accepted
[U-Boot,7/7] ARM: DRA7: Update DDR IO registers - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,6/7] ARM: DRA7: Update DDR IO configuration - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,5/7] ARM: DRA7: Add is_dra72x cpu check definition - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,4/7] ARM: DRA72-evm: Enable HW leveling - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,3/7] ARM: DRA7-evm: Enable HW leveling - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,2/7] ARM: BeagleBoard-X15: Enable HW leveling - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot,1/7] ARM: DRA7: DDR3: Add support for HW leveling - - 1 - --- 2015-06-03 Lokesh Vutla trini Accepted
[U-Boot] net: macb: add gmac multi-queue support 1 - - - --- 2015-06-03 Josh Wu jhersh Accepted
[U-Boot,PATCHv4,3/3] arm: socfpga: enable the Altera SDRAM controller driver 2 - - - --- 2015-06-03 Dinh Nguyen marex Superseded
[U-Boot,PATCHv4,2/3] driver/ddr/altera: Add the sdram calibration portion - - - - --- 2015-06-03 Dinh Nguyen marex Superseded
[U-Boot,PATCHv4,1/3] driver/ddr/altera: Add DDR driver for Altera's SDRAM controller 1 - - - --- 2015-06-03 Dinh Nguyen marex Superseded
[U-Boot,v2,5/5] x86: qemu: Implement PIRQ routing 1 - - - --- 2015-06-03 Bin Meng sjg Accepted
[U-Boot,v2,4/5] x86: coreboot: Control I/O port 0xb2 writing via device tree 1 - - - --- 2015-06-03 Bin Meng sjg Accepted
[U-Boot,v2,3/5] x86: qemu: Create separate i440fx and q35 device trees 1 - - - --- 2015-06-03 Bin Meng sjg Accepted
[U-Boot,v2,2/5] x86: qemu: Add CMD_NET to qemu-x86_defconfig - - - - --- 2015-06-03 Bin Meng sjg Superseded
[U-Boot,v2,1/5] x86: coreboot: Fix cosmetic issues 1 - - - --- 2015-06-03 Bin Meng sjg Accepted
[U-Boot] patch - arm - define SYS_CACHELINE_SIZE for mx5 - - 1 - --- 2015-06-02 Chris Kuethe sbabic Awaiting Upstream
[U-Boot] patch: fix typo in mxc_hab docs - - - - --- 2015-06-02 Chris Kuethe Superseded
[U-Boot,RFC,3/3] ARM: ts4800: add ethernet support - - - - --- 2015-06-02 Damien Riegel sbabic RFC
[U-Boot,RFC,2/3] net: fec_mxc: query mac address from environment - - - - --- 2015-06-02 Damien Riegel sbabic RFC
[U-Boot,RFC,1/3] ARM: ts4800: add basic board support - - - - --- 2015-06-02 Damien Riegel sbabic RFC
[U-Boot,4/4] sunxi: Add a proper dts file for the ga10h a33 based tablet - - - - --- 2015-06-02 Hans de Goede jwrdegoede Accepted
[U-Boot,3/4] sunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name - - - - --- 2015-06-02 Hans de Goede jwrdegoede Accepted
[U-Boot,2/4] sunxi: Sync dts files with the linux kernel - - - - --- 2015-06-02 Hans de Goede jwrdegoede Accepted
[U-Boot,1/4] sunxi: gpio: Add "allwinner, sun8i-a33-pinctrl" - - - - --- 2015-06-02 Hans de Goede jwrdegoede Accepted
[U-Boot,2/2] Revert "break build if it would produce broken binary" 1 - - 1 --- 2015-06-02 Simon Glass aaribaud Accepted
[U-Boot,1/2] arm: Add ENTRY/ENDPROC to private libgcc functions - - - - --- 2015-06-02 Simon Glass aaribaud Accepted
[U-Boot] CPCI4052: Remove CONFIG_SYS_LONGHELP - - - - --- 2015-06-02 Tom Rini trini Accepted
[U-Boot] x86: qemu: Add CMD_NET to qemu-x86_defconfig - - - - --- 2015-06-02 Bin Meng sjg Superseded
[U-Boot,v2,2/2] configs: remove CONFIG_NET_MULTI 2 - - - --- 2015-06-02 Lars Poeschel trini Accepted
[U-Boot,v2,1/2] ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ - - - - --- 2015-06-02 Lars Poeschel trini Accepted
[U-Boot,21/22,v3] armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr - - - - --- 2015-06-02 Prabhakar Kushwaha yorksun Accepted
[U-Boot,v2] pepper: Implement Board Detection mechanism - - - - --- 2015-06-01 Ash Charles trini Accepted
[U-Boot] Pull request: u-boot-net.git master - - - - --- 2015-06-01 Joe Hershberger trini Accepted
[U-Boot] ARM: phytec: pcm051: select board revision by Kconfig - - - - --- 2015-06-01 Lars Poeschel Superseded
[U-Boot] sunxi: Add new Mele_A1000G_quad defconfig - - - - --- 2015-06-01 Hans de Goede jwrdegoede Accepted
[U-Boot] sunxi: usb_phy: Swap check for disconnect threshold 1 - - - --- 2015-06-01 Hans de Goede jwrdegoede Accepted
[U-Boot] ARM: phytec: pcm051: drop unused CONFIG_NET_MULTI - - - - --- 2015-06-01 Lars Poeschel jhersh Changes Requested
[U-Boot,V3,11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio - - - - --- 2015-06-01 Bhuvanchandra DV sbabic Awaiting Upstream
[U-Boot,V3,10/11] usb: ehci-vf: Add weak function for board specific initialisation - - - - --- 2015-06-01 Bhuvanchandra DV sbabic Awaiting Upstream
[U-Boot,V3,09/11] colibri_vf: Add separate defconfig for device tree support 1 - - - --- 2015-06-01 Bhuvanchandra DV sbabic Awaiting Upstream
[U-Boot] x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP 1 - - - --- 2015-06-01 Bin Meng sjg Accepted
[U-Boot,V3,08/11] colibri-vf: Enable SPI support 1 - - - --- 2015-06-01 Bhuvanchandra DV sbabic Awaiting Upstream
[U-Boot,V3,07/11] vf610: dts: Add device tree support - - - - --- 2015-06-01 Bhuvanchandra DV sbabic Awaiting Upstream
« 1 2 ... 1338 1339 1340 … 1791 1792 »