Show patches with: Submitter = Roger Quadros       |    Archived = No       |   100 patches
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[u-boot] configs: am65/j72x: Set CONFIG_LOGLEVEL to 7 [u-boot] configs: am65/j72x: Set CONFIG_LOGLEVEL to 7 - - 1 - --- 2020-10-30 Roger Quadros lokeshvutla Accepted
[u-boot] phy: omap-usb2-phy: disable phy charger detect [u-boot] phy: omap-usb2-phy: disable phy charger detect - - - - --- 2020-06-03 Roger Quadros lokeshvutla Accepted
[u-boot] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge [u-boot] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge 3 - - - --- 2020-01-30 Roger Quadros lokeshvutla Rejected
[U-Boot,4/4] phy: ti-pipe3: Fix SATA & USB PHY power up sequence phy: ti-pipe3: Match TRM sequence & settings - - - - --- 2019-11-06 Roger Quadros trini Accepted
[U-Boot,3/4] phy: ti-pipe3: improve DPLL stability for SATA & USB phy: ti-pipe3: Match TRM sequence & settings - - - - --- 2019-11-06 Roger Quadros trini Accepted
[U-Boot,2/4] phy: ti-pipe3: Introduce mode property in driver data phy: ti-pipe3: Match TRM sequence & settings - - - - --- 2019-11-06 Roger Quadros trini Accepted
[U-Boot,1/4] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL phy: ti-pipe3: Match TRM sequence & settings - - - - --- 2019-11-06 Roger Quadros trini Accepted
[U-Boot,u-boot,v5,04/10] ti: common: board_detect: commodify ethaddr environment setting code - - 2 - --- 2017-03-14 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,10/10] net: don't override ethernet address environment - - 1 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,09/10] ARM: k2g: setup PRU ethernet MAC addresses - - 2 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,08/10] ARM: Use Kconfig for board EEPROM's I2C bus and chip address - - 1 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,07/10] board: ti: am57xx-idk: Auto detect LCD Panel 1 - 1 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,06/10] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet - - 2 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,05/10] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD - - 2 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,04/10] ti: common: board_detect: commodify ethaddr environment setting code - - 2 - --- 2017-03-13 Roger Quadros Superseded
[U-Boot,u-boot,v4,03/10] ti_armv7_keystone2: Define scratch space in SRAM - - - - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,02/10] ti: common: board_detect: Rename EEPROM scratch start macro - - 1 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v4,01/10] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro - - 2 - --- 2017-03-13 Roger Quadros trini Accepted
[U-Boot,u-boot,v3,8/8] ti: common: board_detect: Rename EEPROM scratch start macro - - 1 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,7/8] ARM: k2g: setup PRU ethernet MAC addresses - - 2 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address - - 1 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,5/8] board: ti: am57xx-idk: Auto detect LCD Panel 1 - 1 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,4/8] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet - - 2 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,3/8] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD - - 2 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,2/8] ti: common: board_detect: commodify ethaddr environment setting code - - 2 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v3,1/8] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro - - 2 - --- 2017-02-06 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,8/8] ti: common: board_detect: Rename EEPROM scratch start macro - - 1 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,7/8] ARM: k2g: setup PRU ethernet MAC addresses - - 1 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address - - - - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,5/8] board: ti: am57xx-idk: Auto detect LCD Panel 1 - 1 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,4/8] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet - - 2 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,3/8] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD - - 2 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,2/8] ti: common: board_detect: commodify ethaddr environment setting code - - 2 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,u-boot,v2,1/8] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro - - 2 - --- 2017-01-30 Roger Quadros trini Superseded
[U-Boot,7/7] ti: common: board_detect: Rename EEPROM scratch start macro - - - - --- 2017-01-26 Roger Quadros trini Accepted
[U-Boot,6/7] ARM: k2g: setup PRU ethernet MAC addresses - - - - --- 2017-01-26 Roger Quadros trini Changes Requested
[U-Boot,5/7] board: ti: am57xx-idk: Auto detect LCD Panel 1 - 1 - --- 2017-01-26 Roger Quadros trini Changes Requested
[U-Boot,4/7] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet - - 1 - --- 2017-01-26 Roger Quadros trini Accepted
[U-Boot,3/7] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD - - 1 - --- 2017-01-26 Roger Quadros trini Deferred
[U-Boot,2/7] ti: common: board_detect: commodify ethaddr environment setting code - - - - --- 2017-01-26 Roger Quadros trini Deferred
[U-Boot,1/7] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro - - 1 - --- 2017-01-26 Roger Quadros trini Accepted
[U-Boot,v2,3/3] board: am335x: Always set eth/eth1addr environment variable 1 - 2 - --- 2016-08-24 Roger Quadros jhersh Accepted
[U-Boot,v2,2/3] board: am335x-icev2: add ethernet phy mode detection logic 1 - 2 - --- 2016-08-24 Roger Quadros jhersh Accepted
[U-Boot,v2,1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source sele… - - 2 - --- 2016-08-24 Roger Quadros jhersh Accepted
[U-Boot,4/4] board: am335x: Always set eth/eth1addr environment variable - - - - --- 2016-08-24 Roger Quadros jhersh Accepted
[U-Boot,3/4] board: am335x-icev2: add ethernet phy mode detection logic - - - - --- 2016-08-24 Roger Quadros jhersh Accepted
[U-Boot,2/4] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selecti… - - - - --- 2016-08-24 Roger Quadros jhersh Superseded
[U-Boot,1/4] net: enable chip clk for RMII mode. - - - - --- 2016-08-24 Roger Quadros jhersh Superseded
[U-Boot,u-boot,v2,4/4] usb: phy: omap_usb_phy: Fix USB3_PHY DPLL configuration - - - - --- 2016-05-23 Roger Quadros trini Accepted
[U-Boot,u-boot,v2,3/4] dra7xx: Enable USB_PHY3 32KHz clock - - - - --- 2016-05-23 Roger Quadros trini Accepted
[U-Boot,u-boot,v2,2/4] ARM: AM57xx: AM43xx: Fix USB host - - - - --- 2016-05-23 Roger Quadros trini Accepted
[U-Boot,u-boot,v2,1/4] ARM: OMAP5+: Provide enable/disable_usb_clocks() for CONFIG_USB_XHCI_OMAP - - - - --- 2016-05-23 Roger Quadros trini Accepted
[U-Boot,v2,1/4] usb: dwc3: fix kconfig - - - - --- 2016-05-19 Roger Quadros marex Deferred
[U-Boot,v2,2/4] board: ti: am57xx: Fix USB configuration - - - - --- 2016-05-13 Roger Quadros trini Changes Requested
[U-Boot,4/4] usb: gadget: udc: Build on USB_GADGET - - - - --- 2016-05-13 Roger Quadros marex Rejected
[U-Boot,3/4] usb: dwc3: Makefile: Don't build gadget code if USB_GADGET is disabled 1 - - - --- 2016-05-13 Roger Quadros trini Accepted
[U-Boot,2/4] board: ti: am57xx: Fix USB configuration - - - - --- 2016-05-13 Roger Quadros trini Changes Requested
[U-Boot,1/4] usb: dwc3: fix kconfig - - - - --- 2016-05-13 Roger Quadros trini Deferred
[U-Boot] board: ti: am57xx: Prevent init_sata() from being called twice - - - - --- 2016-04-04 Roger Quadros trini Accepted
[U-Boot,2/2] board: ti: am57xx: Set ethernet MAC addresses from EEPROM to env - - 1 - --- 2016-03-18 Roger Quadros trini Accepted
[U-Boot,1/2] net: export eth_setenv_enetaddr_by_index() to net.h - - 1 - --- 2016-03-18 Roger Quadros trini Accepted
[U-Boot,u-boot,2/2] ARM: beagle_x15: prevent DCAN1 _wait_target_disable failure in kernel - - - - --- 2015-06-25 Roger Quadros trini Accepted
[U-Boot,u-boot] ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernel - - - - --- 2015-06-24 Roger Quadros trini Accepted
[U-Boot,u-boot,3/3] am43xx_evm: Enable NAND boot - - 1 - --- 2015-06-05 Roger Quadros trini Accepted
[U-Boot,u-boot,2/3] am335x_evm: nand: Fix boot from NAND - - 1 - --- 2015-06-05 Roger Quadros trini Accepted
[U-Boot,u-boot,1/3] am335x_evm: am44xx_evm: dra7xx_evm: nand: Fix file-system partition name - - 1 - --- 2015-06-05 Roger Quadros trini Accepted
[U-Boot] configs: am43xx_evm: Enable NAND - - 1 - --- 2015-06-05 Roger Quadros trini Accepted
[U-Boot,u-boot] omap3_beagle: Fix device tree boot - - - - --- 2015-03-06 Roger Quadros trini Changes Requested
[U-Boot,u-boot] omap3_beagle: Fix device tree boot - - - - --- 2014-11-05 Roger Quadros trini Changes Requested
[U-Boot,4/4] common: spl_sata: perform SCSI scan before getting device - - - - --- 2014-09-23 Roger Quadros trini Accepted
[U-Boot,3/4] ARM: OMAP5+: sata: Move scsi_scan() to the right place - - - - --- 2014-09-23 Roger Quadros trini Accepted
[U-Boot,2/4] OMAP5+: sata/scsi: Implement scsi_init() - - - - --- 2014-09-23 Roger Quadros trini Accepted
[U-Boot,1/4] ahci: Don't start command DMA engine before buffers are set - - - - --- 2014-09-23 Roger Quadros trini Accepted
[U-Boot] ahci: Fix data abort on multiple scsi resets. - - - - --- 2014-04-01 Roger Quadros trini Accepted
[U-Boot,3/3] omap4_panda: Don't use ulpi_reset - - 1 - --- 2013-12-02 Roger Quadros trini Accepted
[U-Boot,2/3] omap3_beagle: Don't use ulpi_reset - - 1 - --- 2013-12-02 Roger Quadros trini Accepted
[U-Boot,1/3] usb: ehci-omap: Reset the USB Host OMAP module - - 1 - --- 2013-12-02 Roger Quadros trini Accepted
[U-Boot,v3,8/8] ARM: dra7_evm: Add SATA support - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,7/8] ARM: DRA7xx: Add PRCM and Control information for SATA - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,6/8] ARM: omap5_uevm: Add SATA support - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,5/8] ARM: OMAP5: Add SATA platform glue - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,4/8] ARM: OMAP5: Add PRCM and Control information for SATA - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,3/8] ARM: OMAP5: Add Pipe3 PHY driver - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,2/8] ahci: Fix cache align error messages - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v3,1/8] ahci: Error out with message on malloc() failure - - - - --- 2013-11-11 Roger Quadros trini Accepted
[U-Boot,v2,8/8] ARM: dra7_evm: Add SATA support - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,7/8] ARM: DRA7xx: Add PRCM and Control information for SATA - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,6/8] ARM: omap5_uevm: Add SATA support - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,5/8] ARM: OMAP5: Add SATA platform glue - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,4/8] ARM: OMAP5: Add PRCM and Control information for SATA - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,3/8] ARM: OMAP5: Add Pipe3 PHY driver - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,2/8] ahci: Fix cache align error messages - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,v2,1/8] ahci: Error out with message on malloc() failure - - - - --- 2013-11-11 Roger Quadros trini Superseded
[U-Boot,5/5] ARM: omap5_uevm: Add SATA support - - - - --- 2013-11-06 Roger Quadros trini Deferred
[U-Boot,4/5] ARM: OMAP5: Add SATA platform glue - - - - --- 2013-11-06 Roger Quadros trini Changes Requested
[U-Boot,3/5] ARM: OMAP5: Add PRCM and Control information for SATA - - - - --- 2013-11-06 Roger Quadros trini Deferred
[U-Boot,2/5] ARM: OMAP5: Add Pipe3 PHY driver - - - - --- 2013-11-06 Roger Quadros trini Changes Requested
[U-Boot,1/5] ahci: Error out with message on malloc() failure - - - - --- 2013-11-06 Roger Quadros trini Deferred
[U-Boot] usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module 1 - - 2 --- 2013-07-22 Roger Quadros marex Superseded
[U-Boot,1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state 1 - - - --- 2012-06-21 Roger Quadros trini Rejected