Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 ... 179 180 181 182 183 184 185 186 187 ... 304 305 Next »
Filters: Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,05/10,v2] net: fec_mxc: Add initialized eth_device structure 0 0 0 2010-10-19 Nobuhiro Iwamatsu Accepted
[U-Boot,04/10,v2] net: eepro100: Add initialized eth_device structure 0 0 0 2010-10-19 Nobuhiro Iwamatsu Accepted
[U-Boot,03/10,v2] net: dc2114x: Add initialized eth_device structure 0 0 0 2010-10-19 Nobuhiro Iwamatsu Accepted
[U-Boot,02/10,v2] net: rtl8139: Add initialized eth_device structure 0 0 0 2010-10-19 Nobuhiro Iwamatsu Accepted
[U-Boot,01/10,v2] net: rtl8169: Add initialized eth_device structure 0 0 0 2010-10-19 Nobuhiro Iwamatsu Accepted
[U-Boot,RFC,v2,2/2] ARMV7: OMAP4: Add twl6032 support 0 0 0 2013-10-08 Oleg Kosheliev trini Accepted
[U-Boot,RFC,v2,1/2] ARMV7: OMAP4: Add struct for twl603x data 0 0 0 2013-10-08 Oleg Kosheliev trini Accepted
[U-Boot,RFC] armv7:omap4-common: Correct check of the SPL image size 0 0 0 2013-07-24 Oleg Kosheliev trini Changes Requested
[U-Boot,RFC,2/2] ARMV7: OMAP4: Add twl6032 support 0 0 0 2013-07-24 Oleg Kosheliev trini Changes Requested
[U-Boot,RFC,1/2] ARMV7: OMAP4: Add struct for twl603x data 0 0 0 2013-07-24 Oleg Kosheliev trini Changes Requested
[U-Boot,u-boot,RFC,v1] sdp4430: Enable Falcon boot mode for mmc (RAW and FAT) 0 0 0 2013-08-06 Oleksandr Tyshchenko trini Changes Requested
[U-Boot,u-boot,RFC,v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE 0 0 0 2013-08-06 Oleksandr Tyshchenko trini Accepted
[U-Boot,u-boot,RFC,v1] mmc: Remove unused variable backup from mmc_send_cmd() 1 0 0 2013-08-06 Oleksandr Tyshchenko panto Accepted
[U-Boot,u-boot,RFC,v1] ARMV7: OMAP4+: Fix boot issues when using Alternative Boot operation mode 0 0 0 2013-08-06 Oleksandr Tyshchenko trini Changes Requested
[U-Boot,u-boot,RFC,v1] omap_hsmmc: omap4+/am335x: modify MMC controller internal fsm reset func 1 0 0 2013-08-06 Oleksandr Tyshchenko panto Accepted
[U-Boot,2/2] mmc: Fix erase_grp_size for partitioned card 1 0 0 2013-10-01 Oliver Metz panto Accepted
[U-Boot,1/2] mmc: Fix calculation of capacity for hc cards 0 0 0 2013-10-01 Oliver Metz panto Rejected
[U-Boot,1/2] fw_env: add redundand env support for MTD_ABSENT 0 0 0 2013-08-27 Oliver Metz trini Not Applicable
[U-Boot,2/2] fw_env: fix writing environment for mtd devices 0 0 0 2013-08-25 Oliver Metz trini Superseded
[U-Boot,1/2] fw_env: add redundand env support for MTD_ABSENT 0 0 0 2013-08-25 Oliver Metz trini Changes Requested
[U-Boot,RESEND,2/2] Update all references to get_ram_size to unsigned long 0 0 0 2013-11-14 Oliver Schinagl trini New
[U-Boot,RESEND,1/2] get_ram_size incorrectly returns long, should be unsigned long 0 0 0 2013-11-14 Oliver Schinagl trini New
[U-Boot,RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long 0 0 0 2013-10-07 Oliver Schinagl trini New
[U-Boot] x86: turn off cache: set control register properly 0 0 0 2011-09-30 Ondrej Kupka gruss Accepted
[U-Boot,v2] MUSB timeout broken 0 0 0 2011-07-04 Orjan Friberg marex Accepted
[U-Boot] MUSB timeout broken 0 0 0 2011-07-04 Orjan Friberg Changes Requested
[U-Boot,6/6] warp: Add initial WaRP Board support 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,5/6] Print ramdisk load address if it is in use 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,4/6] mmc: fsl_esdhc: Add support to force VSELECT set 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,3/6] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,2/6] imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,1/6] usb: ehci: mx6: Add support for i.MX6SL 0 0 0 2014-06-16 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,2/2] wandboard: Pass video kernel arguments for HDMI and LCD 0 0 0 2014-05-01 Otavio Salvador sbabic Accepted
[U-Boot,v3,1/2] wandboard: add Future Eletronics 7" WVGA LCD extension board 1 0 0 2014-05-01 Otavio Salvador sbabic Accepted
[U-Boot,v2] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2014-05-01 Otavio Salvador sbabic Changes Requested
[U-Boot] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2014-05-01 Otavio Salvador sbabic Changes Requested
[U-Boot,imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected 0 0 0 2014-02-12 Otavio Salvador sbabic Changes Requested
[U-Boot] Revert "fdt_support: 64bit initrd start address support" 0 0 0 2014-01-20 Otavio Salvador trini Superseded
[U-Boot,imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected 0 0 0 2014-01-19 Otavio Salvador sbabic Changes Requested
[U-Boot,11/11] vf610twr: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,10/11] udoo: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,09/11] mx6slevk: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,08/11] mx6sabre_common: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,07/11] mx6qarm2: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,06/11] mx53loco: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,05/11] mx51evk: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,04/11] mx28evk: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,03/11] mx23evk: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,02/11] hummingboard: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot,01/11] cgtqmx6eval: Set default environment to use zImage 0 0 0 2014-01-16 Otavio Salvador sbabic Accepted
[U-Boot] mx6: Distinguish mx6dual from mx6quad 0 0 0 2014-01-16 Otavio Salvador sbabic Not Applicable
[U-Boot,v5,3/3] wandboard: Set default environment to use zImage 0 0 0 2014-01-06 Otavio Salvador sbabic Accepted
[U-Boot,v5,2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2014-01-06 Otavio Salvador sbabic Changes Requested
[U-Boot,v5,1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update 0 0 0 2014-01-06 Otavio Salvador sbabic Accepted
[U-Boot,v4,3/3] wandboard: Set default environment to use zImage 0 0 0 2014-01-03 Otavio Salvador sbabic Superseded
[U-Boot,v4,2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2014-01-03 Otavio Salvador sbabic Superseded
[U-Boot,v4,1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update 0 0 0 2014-01-03 Otavio Salvador sbabic Superseded
[U-Boot,v2] wandboard: Set default environment to use zImage 0 0 0 2014-01-01 Otavio Salvador sbabic Superseded
[U-Boot] wandboard: Set default environment to use zImage 0 1 0 2013-12-31 Otavio Salvador sbabic Superseded
[U-Boot,v3,8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6 1 0 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,7/8] ARM: mx6: Change the FDT loading address to avoid overlaping 1 0 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,6/8] mx28evk: Extend environment to easy write of NAND system 0 0 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,5/8] mx28evk: Add 'nandboot' environment command 0 1 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,4/8] mx28evk: Use 512k for fdt partition to align it 1 0 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,3/8] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro 1 0 0 2013-12-16 Otavio Salvador sbabic Accepted
[U-Boot,v3,2/8] mx6sabresd: Add eMMC specific environment to allow U-Boot update 0 0 0 2013-12-16 Otavio Salvador sbabic Changes Requested
[U-Boot,v3,1/8] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2013-12-16 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,9/9] ARM: mx6: Change the FDT loading address to avoid overlaping 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,8/9] mx28evk: Extend environment to easy write of NAND system 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,7/9] mx28evk: Add 'nandboot' environment command 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,6/9] mx28evk: Use 512k for fdt partition to align it 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,5/9] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,4/9] mx6sabresd: Add eMMC specific environment to allow U-Boot update 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot,v2,3/9] wandboard: Pass 'quiet' bootparam by default 0 0 0 2013-11-28 Otavio Salvador sbabic Rejected
[U-Boot,v2,2/9] wandboard: Use '0' as bootdelay but interruptable 0 0 0 2013-11-28 Otavio Salvador sbabic Rejected
[U-Boot,v2,1/9] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 0 2013-11-28 Otavio Salvador sbabic Changes Requested
[U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10 0 0 0 2013-11-26 Otavio Salvador sbabic Not Applicable
[U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10 0 0 0 2013-11-26 Otavio Salvador sbabic Not Applicable
[U-Boot] ARM: mx6: Remove the FDT loading address to avoid overlaping 0 0 0 2013-11-26 Otavio Salvador trini Changes Requested
[U-Boot,5/5] cgtqmx6eval: Change FDT loading address to avoid overlaping 0 0 0 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,4/5] nitrogen6x: Change FDT loading address to avoid overlaping 0 0 0 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,3/5] udoo: Change FDT loading address to avoid overlaping 0 0 0 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,2/5] wandboard: Change FDT loading address to avoid overlaping 0 0 0 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping 0 0 1 2013-11-01 Otavio Salvador sbabic Changes Requested
[U-Boot,4/4] wandboard: Pass 'quiet' bootparam by default 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,3/4] wandboard: Use '0' as bootdelay but interruptable 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,2/4] wandboard: add Future Eletronics 7" WVGA LCD extension board 0 0 1 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin 0 0 0 2013-10-21 Otavio Salvador sbabic Accepted
[U-Boot] mx6sabresd: Add eMMC specific environment to allow U-Boot update 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,RESEND] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,RESEND,3/3] mx28evk: Extend environment to easy write of NAND system 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,RESEND,2/3] mx28evk: Add 'nandboot' environment command 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,RESEND,1/3] mx28evk: Use 512k for fdt partition to align it 0 0 0 2013-10-21 Otavio Salvador sbabic Changes Requested
[U-Boot,3/3] mx28evk: Extend environment to easy write of NAND system 0 0 0 2013-10-12 Otavio Salvador sbabic Superseded
[U-Boot,2/3] mx28evk: Add 'nandboot' environment command 0 0 0 2013-10-12 Otavio Salvador sbabic Superseded
[U-Boot,1/3] mx28evk: Use 512k for fdt partition to align it 0 0 0 2013-10-12 Otavio Salvador sbabic Superseded
[U-Boot] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro 0 0 0 2013-10-11 Otavio Salvador sbabic Superseded
[U-Boot,2/2] mtd: Fix size overflow 0 0 0 2013-10-03 Otavio Salvador Awaiting Upstream
[U-Boot,1/2] mx28evk: Use 512k for fdt partition to align it 0 0 0 2013-10-03 Otavio Salvador sbabic Superseded
[U-Boot] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro 0 0 0 2013-10-03 Otavio Salvador Changes Requested