diff mbox series

[64/73] pata_sil680: convert blank printk() calls

Message ID 20211208163255.114660-65-hare@suse.de
State New
Headers show
Series libata: rework logging, take II | expand

Commit Message

Hannes Reinecke Dec. 8, 2021, 4:32 p.m. UTC
Convert blank printk() calls to structured logging.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/ata/pata_sil680.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Sergey Shtylyov Dec. 9, 2021, 8:24 a.m. UTC | #1
On 08.12.2021 19:32, Hannes Reinecke wrote:

> Convert blank printk() calls to structured logging.
> 
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> ---
>   drivers/ata/pata_sil680.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
> index 81238e097fe2..0da58ce20d82 100644
> --- a/drivers/ata/pata_sil680.c
> +++ b/drivers/ata/pata_sil680.c
> @@ -308,17 +308,17 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
>   
>   	switch (tmpbyte & 0x30) {
>   	case 0x00:
> -		printk(KERN_INFO "sil680: 100MHz clock.\n");
> +		dev_info(&pdev->dev, "sil680: 100MHz clock.\n");
>   		break;
>   	case 0x10:
> -		printk(KERN_INFO "sil680: 133MHz clock.\n");
> +		dev_info(&pdev->dev, "sil680: 133MHz clock.\n");
>   		break;
>   	case 0x20:
> -		printk(KERN_INFO "sil680: Using PCI clock.\n");
> +		dev_info(&pdev->dev, "sil680: Using PCI clock.\n");
>   		break;
>   	/* This last case is _NOT_ ok */
>   	case 0x30:
> -		printk(KERN_ERR "sil680: Clock disabled ?\n");
> +		dev_err(&pdev->dev, "sil680: Clock disabled ?\n");

    Could remove a space before ?, while at it?

[...]

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 81238e097fe2..0da58ce20d82 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -308,17 +308,17 @@  static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 
 	switch (tmpbyte & 0x30) {
 	case 0x00:
-		printk(KERN_INFO "sil680: 100MHz clock.\n");
+		dev_info(&pdev->dev, "sil680: 100MHz clock.\n");
 		break;
 	case 0x10:
-		printk(KERN_INFO "sil680: 133MHz clock.\n");
+		dev_info(&pdev->dev, "sil680: 133MHz clock.\n");
 		break;
 	case 0x20:
-		printk(KERN_INFO "sil680: Using PCI clock.\n");
+		dev_info(&pdev->dev, "sil680: Using PCI clock.\n");
 		break;
 	/* This last case is _NOT_ ok */
 	case 0x30:
-		printk(KERN_ERR "sil680: Clock disabled ?\n");
+		dev_err(&pdev->dev, "sil680: Clock disabled ?\n");
 	}
 	return tmpbyte & 0x30;
 }