Show patches with: State = Action Required       |    Archived = No       |   296 patches
« 1 2 3 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v3,2/2] i2c: npcm7xx: add i2c controller master mode only i2c: npcm7xx: new driver for I2C controller - - - - 0 0 0 2018-08-14 Tali Perry New
[v3,1/2] dt-bindings: i2c: npcm7xx: add binding for i2c controller i2c: npcm7xx: new driver for I2C controller - - - - 0 0 0 2018-08-14 Tali Perry New
dt-bindings: i2c: sh_mobile: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support - - 1 - 0 0 0 2018-08-14 Fabrizio Castro New
dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: rcar: Add r8a774a1 support - - 1 - 0 0 0 2018-08-14 Fabrizio Castro New
[RFC,4/4] ARM: dts: phyboard-mira-dl: rely on PMIC for reboot and watchdog I2C writes with interrupts disabled - - - - 0 0 0 2018-08-13 Stefan Lengfeld New
[RFC,3/4] watchdog: da9062: avoid regmap in restart handler I2C writes with interrupts disabled - - - - 0 0 0 2018-08-13 Stefan Lengfeld New
[RFC,2/4] i2c: imx: implement IRQ less master_xfer function I2C writes with interrupts disabled - - - - 0 0 0 2018-08-13 Stefan Lengfeld New
[RFC,1/4] i2c: allow drivers to announce that they are IRQ safe I2C writes with interrupts disabled - - - - 0 0 0 2018-08-13 Stefan Lengfeld New
[v2,2/2] i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value [v2,1/2] i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes 1 - - - 0 0 0 2018-08-12 Hans de Goede New
[v2,1/2] i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes [v2,1/2] i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes 1 - - - 0 0 0 2018-08-12 Hans de Goede New
i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes 1 - - - 0 0 0 2018-08-10 Hans de Goede New
[PULL,REQUEST] i2c for 4.18 [PULL,REQUEST] i2c for 4.18 - - - - 0 0 0 2018-08-10 Wolfram Sang New
[v2] i2c: designware: Add SPDX license tag [v2] i2c: designware: Add SPDX license tag 2 - - - 0 0 0 2018-08-10 Andy Shevchenko New
[v2,29/29] eeprom: at24: kill at24_platform_data at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,28/29] ARM: davinci: mityomapl138: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,27/29] ARM: davinci: mityomapl138: use nvmem notifiers at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,26/29] ARM: davinci: remove dead code related to MAC address reading at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,25/29] ARM: davinci: sffsdr: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,24/29] ARM: davinci: sffsdr: fix the at24 eeprom device name at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,23/29] ARM: davinci: dm646x-evm: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,22/29] ARM: davinci: dm644x-evm: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,21/29] ARM: davinci: da830-evm: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,20/29] ARM: davinci: dm365-evm: use device properties for at24 eeprom at24: remove at24_platform_data - - 1 - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,19/29] ARM: davinci: mityomapl138: don't read the MAC address from machine code at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,18/29] ARM: davinci: da850-evm: remove dead MTD code at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,17/29] net: davinci_emac: use eth_platform_get_mac_address() at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,16/29] net: add support for nvmem to eth_platform_get_mac_address() at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,15/29] net: split eth_platform_get_mac_address() into subroutines at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,14/29] net: simplify eth_platform_get_mac_address() at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,13/29] ARM: davinci: da850-evm: remove unnecessary include at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,12/29] ARM: davinci: da850-evm: use nvmem lookup for mac address at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,11/29] ARM: davinci: mityomapl138: add nvmem cells lookup entries at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,10/29] ARM: davinci: da830-evm: use nvmem lookup for mac address at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,09/29] ARM: davinci: dm646x-evm: use nvmem lookup for mac address at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,08/29] ARM: davinci: dm644-evm: use nvmem lookup for mac address at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,07/29] ARM: davinci: dm365-evm: use nvmem lookup for mac address at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,06/29] mtd: Add support for reading MTD devices via the nvmem API at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,05/29] nvmem: remove the name field from struct nvmem_device at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,04/29] nvmem: provide nvmem_dev_name() at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,03/29] nvmem: add a notifier chain at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,02/29] Documentation: nvmem: document lookup entries at24: remove at24_platform_data - - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v2,01/29] nvmem: add support for cell lookups at24: remove at24_platform_data 1 - - - 0 0 0 2018-08-10 Bartosz Golaszewski New
[v3,3/3] arm: dts: ls1021a: Enable I2C DMA support i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-08-09 Esben Haabendal New
[v3,2/3] i2c: imx: Simplify stopped state tracking i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-08-09 Esben Haabendal New
[v3,1/3] i2c: imx: Fix race condition in dma read i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-08-09 Esben Haabendal New
[2/2] i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: implement STOP and REP_START according to docs - - - - 0 0 0 2018-08-08 Wolfram Sang New
[1/2] i2c: rcar: refactor private flags i2c: rcar: implement STOP and REP_START according to docs - - - - 0 0 0 2018-08-08 Wolfram Sang New
[v2,2/2] i2c: npcm7xx: add i2c controller master mode only i2c: npcm7xx: new driver for I2C controller - - - - 0 0 0 2018-08-07 Tali Perry New
[v2,1/2] dt-binding: i2c: npcm7xx: add binding for i2c controller i2c: npcm7xx: new driver for I2C controller - - - - 0 0 0 2018-08-07 Tali Perry New
[v3,1/6] i2c: designware: use generic table matching Add support for MSCC Ocelot i2c 1 - - - 0 0 0 2018-08-06 Alexandre Belloni Needs Review / ACK
[v3,2/2] i2c: Add Qualcomm CCI I2C driver i2c: Add support for Qcom CCI I2C controller - - - - 0 0 0 2018-08-06 Vinod New
[v3,1/2] dt-bindings: i2c: Add binding for Qualcomm CCI I2C controller i2c: Add support for Qcom CCI I2C controller - - - - 0 0 0 2018-08-06 Vinod New
eeprom: at24: Fix unexpected timeout under high load eeprom: at24: Fix unexpected timeout under high load - - - - 0 0 0 2018-08-04 Mark Jonas New
[i2c-next,v3] i2c: aspeed: Handle master/slave combined irq events properly [i2c-next,v3] i2c: aspeed: Handle master/slave combined irq events properly - - - - 0 0 0 2018-08-01 Jae Hyun Yoo New
[2/2] i2c: at91: Save the bus clock frequency in adapter i2c: enable buses to save their clock frequency in adapter 1 - - - 0 0 0 2018-08-01 Tudor Ambarus New
[1/2] i2c: enable buses to save their clock frequency in adapter i2c: enable buses to save their clock frequency in adapter - - - - 0 0 0 2018-08-01 Tudor Ambarus New
i2c: enable async suspend/resume on i2c devices i2c: enable async suspend/resume on i2c devices - - - - 0 0 0 2018-07-26 dbasehore . New
[v1,3/6] i2c: designware: Get rid of fp_str temporary variable [v1,1/6] i2c: core: Parse SDA hold time from firmware - - - - 0 0 0 2018-07-25 Andy Shevchenko Under Review
[RESEND,v4,2/2] eeprom: at24: Add support for address-width property Add aproperty in at24.c - - - - 0 0 0 2018-07-25 Chiang, AlanX brgl New
[RESEND,v4,1/2] dt-bindings: at24: Add address-width property Add aproperty in at24.c 1 - 1 - 0 0 0 2018-07-25 Chiang, AlanX brgl New
[09/12] i2c: zx2967: use core to detect 'no zero length' quirk i2c: quirks: add zero length checks and update drivers - - - - 0 0 0 2018-07-23 Wolfram Sang New
[08/12] i2c: tegra: use core to detect 'no zero length' quirk i2c: quirks: add zero length checks and update drivers - - - - 0 0 0 2018-07-23 Wolfram Sang New
[06/12] i2c: qup: use core to detect 'no zero length' quirk i2c: quirks: add zero length checks and update drivers - - - - 0 0 0 2018-07-23 Wolfram Sang New
[04/12] i2c: omap: use core to detect 'no zero length' quirk i2c: quirks: add zero length checks and update drivers - - - - 0 0 0 2018-07-23 Wolfram Sang New
[v2,2/2] i2c: Add Qualcomm Camera Control Interface driver i2c: Add support for Qualcomm Camera Control Interface - - - - 0 0 0 2018-07-17 Vinod New
[v2,1/2] dt-bindings: i2c: Add binding document for Qualcomm CCI i2c: Add support for Qualcomm Camera Control Interface - - - - 0 0 0 2018-07-17 Vinod New
[v3,3/3] i2c: at91: added slave mode support i2c: at91: slave mode support - - - - 0 0 0 2018-07-16 Ludovic Desroches New
[v3,2/3] i2c: at91: split driver into core and master file i2c: at91: slave mode support - - - - 0 0 0 2018-07-16 Ludovic Desroches New
[v3,1/3] i2c: at91: segregate master mode specific code from probe and init func i2c: at91: slave mode support - - - - 0 0 0 2018-07-16 Ludovic Desroches New
[PATCH/RFT,6/6] i2c: recovery: remove bogus check if SDA GPIO is set to output i2c: recovery: fix GPIO usage for recovery - - 1 - 0 0 0 2018-07-13 Wolfram Sang New
[PATCH/RFT,5/6] i2c: imx: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - 0 0 0 2018-07-13 Wolfram Sang New
[PATCH/RFT,4/6] i2c: davinci: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - 0 0 0 2018-07-13 Wolfram Sang New
[PATCH/RFT,3/6] i2c: designware: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - 0 0 0 2018-07-13 Wolfram Sang New
[PATCH/RFT,1/6] i2c: designware: use open drain for recovery GPIO i2c: recovery: fix GPIO usage for recovery - - - - 0 0 0 2018-07-13 Wolfram Sang New
[v2,4/4] arm: dts: ls1021a: Enable I2C DMA support i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-07-09 Esben Haabendal New
[v2,3/4] i2c: imx: Simplify stopped state tracking i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-07-09 Esben Haabendal New
[v2,2/4] i2c: imx: Fix race condition in dma read i2c: imx: Fix and enable DMA support for LS1021A - - - - 0 0 0 2018-07-09 Esben Haabendal New
[v2,3/3] i2c: mediatek: Use DMA safe buffers for i2c transactions Register i2c adapter driver earlier and use DMA safe buffers - - - - 0 0 0 2018-07-07 Jun Gao Under Review
[v2,2/3] i2c: Add helper to ease DMA handling Register i2c adapter driver earlier and use DMA safe buffers - - - - 0 0 0 2018-07-07 Jun Gao Under Review
[3/3] i2c:ocores: add polling interface [1/3] i2c:ocores: stop transfer on timeout - - - - 0 0 0 2018-06-25 Federico Vaga New
[2/3] i2c:ocores: do not handle IRQ if IF is not set [1/3] i2c:ocores: stop transfer on timeout - - - - 0 0 0 2018-06-25 Federico Vaga New
[1/3] i2c:ocores: stop transfer on timeout [1/3] i2c:ocores: stop transfer on timeout - - - - 0 0 0 2018-06-25 Federico Vaga New
PATCH i2c: smbus_read_block write out of buffer on noisy bus PATCH i2c: smbus_read_block write out of buffer on noisy bus - - - - 0 0 0 2018-06-21 Pasha New
[v3,12/12] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. cros_ec: Match licenses and switch to SPDX identifier. - - - - 0 0 0 2018-06-06 Enric Balletbo i Serra New
[v2,8/8] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. cros_ec: Switch to SPDX identifier. - - - - 0 0 0 2018-06-05 Enric Balletbo i Serra New
[9/9] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. croc_ec: Switch to SPDX identifier - - - - 0 0 0 2018-06-05 Enric Balletbo i Serra New
[v2,1/2] i2c: core-smbus: fix a potential uninitialization bug [v2,1/2] i2c: core-smbus: fix a potential uninitialization bug - - - - 0 0 0 2018-05-05 Wenwen Wang Under Review
i2c:amd I2C Driver based on PCI Interface for upcoming platform i2c:amd I2C Driver based on PCI Interface for upcoming platform - - 4 - 0 0 0 2018-04-28 Shah, Nehal-bakulchandra New
[i2c/slave-mqueue,v5] i2c: slave-mqueue: add a slave backend to receive and queue messages [i2c/slave-mqueue,v5] i2c: slave-mqueue: add a slave backend to receive and queue messages - - - - 0 0 0 2018-04-23 Wang, Haiyue New
[4/4] i2c: mux: pca954x: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - 0 0 0 2018-04-17 Peter Rosin peda Needs Review / ACK
[3/4] i2c: mux: pca9541: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - 0 0 0 2018-04-17 Peter Rosin peda Needs Review / ACK
[2/4] i2c: mux: mlxcpld: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - 0 0 0 2018-04-17 Peter Rosin peda Needs Review / ACK
Further cadence i2c buffer overrun fixes Further cadence i2c buffer overrun fixes - - - - 0 0 0 2018-04-16 Andrew Worsley New
[2/2] I2c receive buffer overrun bugfix - clear hold bit before end. Untitled series #37153 - - - - 0 0 0 2018-04-03 Andrew Worsley New
[i2c/slave-mqueue,v4] i2c: slave-mqueue: add a slave backend to receive and queue messages [i2c/slave-mqueue,v4] i2c: slave-mqueue: add a slave backend to receive and queue messages - - - - 0 0 0 2018-04-03 Wang, Haiyue New
[RFC,2/2] i2c: at91: provide bus_freq_hz [RFC,1/2] i2c: add bus_freq_hz in i2c_adapter 1 - - - 0 0 0 2018-03-26 Tudor Ambarus New
[RFC,1/2] i2c: add bus_freq_hz in i2c_adapter [RFC,1/2] i2c: add bus_freq_hz in i2c_adapter - - - - 0 0 0 2018-03-26 Tudor Ambarus New
[3/3] i2c: mux: pca9541: prepare for PCA9641 support [1/3] i2c: mux: pca9541: use the BIT macro - - 2 - 0 0 0 2018-03-20 Peter Rosin peda New
[2/3] i2c: mux: pca9541: namespace cleanup [1/3] i2c: mux: pca9541: use the BIT macro - - 1 - 0 0 0 2018-03-20 Peter Rosin peda New
[1/3] i2c: mux: pca9541: use the BIT macro [1/3] i2c: mux: pca9541: use the BIT macro - - 2 - 0 0 0 2018-03-20 Peter Rosin peda New
« 1 2 3 »