Show patches with: State = Action Required       |   341 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[5/5] i2c: Add Actions Semi OWL family S900 I2C driver Add Actions Semi S900 I2C support - - - - 0 0 0 2018-06-23 Manivannan Sadhasivam New
[4/5] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board Add Actions Semi S900 I2C support - - - - 0 0 0 2018-06-23 Manivannan Sadhasivam New
[3/5] arm64: dts: actions: Add pinctrl definition for S900 I2C controller Add Actions Semi S900 I2C support - - - - 0 0 0 2018-06-23 Manivannan Sadhasivam New
[2/5] arm64: dts: actions: Add Actions Semi S900 I2C controller nodes Add Actions Semi S900 I2C support - - - - 0 0 0 2018-06-23 Manivannan Sadhasivam New
[1/5] dt-bindings: i2c: Add binding for Actions Semi OWL I2C controller Add Actions Semi S900 I2C support - - - - 0 0 0 2018-06-23 Manivannan Sadhasivam New
[v5,10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Add the I3C subsystem - - 1 - 0 0 0 2018-06-22 Boris Brezillon New
[v5,09/10] gpio: Add a driver for Cadence I3C GPIO expander Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
[v5,08/10] dt-bindings: i3c: Document Cadence I3C master bindings Add the I3C subsystem - - 1 - 0 0 0 2018-06-22 Boris Brezillon New
[v5,07/10] i3c: master: Add driver for Cadence IP Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
[v5,06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
[v5,05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property Add the I3C subsystem - - 1 - 0 0 0 2018-06-22 Boris Brezillon New
[v5,04/10] dt-bindings: i3c: Document core bindings Add the I3C subsystem - - 1 - 0 0 0 2018-06-22 Boris Brezillon New
[v5,03/10] i3c: Add sysfs ABI spec Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
[v5,02/10] docs: driver-api: Add I3C documentation Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
[v5,01/10] i3c: Add core I3C infrastructure Add the I3C subsystem - - - - 0 0 0 2018-06-22 Boris Brezillon New
PATCH i2c: smbus_read_block write out of buffer on noisy bus PATCH i2c: smbus_read_block write out of buffer on noisy bus - - - - 0 0 0 2018-06-21 Pasha Orehov New
i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers - 1 - - 0 0 0 2018-06-20 Peter Rosin New
[5/5] i2c: mux: make use of __i2c_smbus_xfer i2c: smbus: add unlocked __i2c_smbus_xfer variant - - - - 0 0 0 2018-06-20 Peter Rosin New
[4/5] i2c: mux: pca954x: make use of __i2c_smbus_xfer i2c: smbus: add unlocked __i2c_smbus_xfer variant - - - - 0 0 0 2018-06-20 Peter Rosin New
[3/5] i2c: mux: pca9541: make use of __i2c_smbus_xfer i2c: smbus: add unlocked __i2c_smbus_xfer variant - - - - 0 0 0 2018-06-20 Peter Rosin New
[2/5] i2c: mux: mlxcpld: make use of __i2c_smbus_xfer i2c: smbus: add unlocked __i2c_smbus_xfer variant 1 - - - 0 0 0 2018-06-20 Peter Rosin New
[1/5] i2c: smbus: add unlocked __i2c_smbus_xfer variant i2c: smbus: add unlocked __i2c_smbus_xfer variant - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,10/10] i2c: remove i2c_lock_adapter and use i2c_lock_bus directly Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,09/10] mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,08/10] media: tda18271: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,07/10] media: tda1004x: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,06/10] media: rtl2830: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,05/10] media: drxk_hard: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,04/10] media: af9013: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,03/10] input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment 1 - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,02/10] i2c: mux: pca9541: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v2,01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment - - - - 0 0 0 2018-06-20 Peter Rosin New
[v5,8/8] i2c: designware: Add debug print for bus speed i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,7/8] i2c: designware: Add debug print for SDA hold time value i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,6/8] i2c: designware: Separate timing parameter setting from HW initalization i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,5/8] i2c: designware: Move SDA hold time configuration to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,4/8] i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,3/8] i2c: designware: Don't use internal ___constant_swab32 i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,2/8] i2c: designware: Move register access detection to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v5,1/8] i2c: designware: Remove needless variable from i2c_dw_init_slave() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-19 Jarkko Nikula New
[v2] i2c: tegra: Add support for Tegra194 [v2] i2c: tegra: Add support for Tegra194 1 - - - 0 0 0 2018-06-19 Thierry Reding New
i2c: tegra: Add support for Tegra194 i2c: tegra: Add support for Tegra194 1 - - - 0 0 0 2018-06-18 Thierry Reding New
[2/2] i2c: algos: bit: mention our experience about initial states i2c: algos: bit: revert to fix regression (#200045) 1 - - - 0 0 0 2018-06-16 Wolfram Sang New
[1/2] Revert "i2c: algo-bit: init the bus to a known state" i2c: algos: bit: revert to fix regression (#200045) - 1 - - 0 0 0 2018-06-16 Wolfram Sang New
[RFC] i2c: gpio: initialize SCL to HIGH again [RFC] i2c: gpio: initialize SCL to HIGH again - 1 - 1 0 0 0 2018-06-16 Wolfram Sang New
[RFT] i2c: algos: bit: prepare/unprepare before sending initial STOP [RFT] i2c: algos: bit: prepare/unprepare before sending initial STOP - - - - 0 0 0 2018-06-15 Wolfram Sang New
i2c: i801: Consolidate chipset names in documentation and Kconfig i2c: i801: Consolidate chipset names in documentation and Kconfig - - 1 - 0 0 0 2018-06-14 Jarkko Nikula New
[RFT,2/2] i2c: algos: bit: make sure to send STOP i2c: algos: bit: try to fix bug #200045 - - - - 0 0 0 2018-06-14 Wolfram Sang New
[RFT,1/2] i2c: algos: bit: apply generic delays on initial STOP i2c: algos: bit: try to fix bug #200045 - - - - 0 0 0 2018-06-14 Wolfram Sang New
[v10,7/7] i2c: fsi: Add bus recovery i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-13 Eddie James New
[v10,6/7] i2c: fsi: Add I2C master locking i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-13 Eddie James New
[v10,5/7] i2c: fsi: Add transfer implementation i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-13 Eddie James New
[v10,4/7] i2c: fsi: Add abort and hardware reset procedures i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-13 Eddie James New
[v10,3/7] i2c: fsi: Add port structures i2c: Add FSI-attached I2C master algorithm - - - 1 0 0 0 2018-06-13 Eddie James New
[v10,2/7] i2c: Add FSI-attached I2C master algorithm i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-13 Eddie James New
[v10,1/7] dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation i2c: Add FSI-attached I2C master algorithm 1 - - - 0 0 0 2018-06-13 Eddie James New
[PULL,REQUEST] i2c for 4.18 [PULL,REQUEST] i2c for 4.18 - - - - 0 0 0 2018-06-13 Wolfram Sang New
[v7,4/4] arm64: dts: sdm845: Add support for an instance of I2C controller Introduce GENI SE Controller Driver - - 1 - 0 0 0 2018-06-12 Karthikeyan Ramasubramanian New
[v7,3/4] arm64: dts: sdm845: Add serial console support Introduce GENI SE Controller Driver - - - - 0 0 0 2018-06-12 Karthikeyan Ramasubramanian New
[v7,2/4] MAINTAINERS: Add Qualcomm Generic Interface I2C driver maintainer Introduce GENI SE Controller Driver - - - - 0 0 0 2018-06-12 Karthikeyan Ramasubramanian New
[v7,1/4] i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller Introduce GENI SE Controller Driver - - 2 1 0 0 0 2018-06-12 Karthikeyan Ramasubramanian New
[RFC,v2] media: i2c: add SCCB helpers [RFC,v2] media: i2c: add SCCB helpers - - 1 - 0 0 0 2018-06-12 Akinobu Mita New
[v4,8/8] i2c: designware: Add debug print for bus speed i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,7/8] i2c: designware: Add debug print for SDA hold time value i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,6/8] i2c: designware: Separate timing parameter setting from HW initalization i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,5/8] i2c: designware: Move SDA hold time configuration to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,4/8] i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,3/8] i2c: designware: Don't use internal ___constant_swab32 i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,2/8] i2c: designware: Move register access detection to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v4,1/8] i2c: designware: Remove needless variable from i2c_dw_init_slave() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-12 Jarkko Nikula New
[v3,8/8] i2c: designware: Add debug print for bus speed i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,7/8] i2c: designware: Add debug print for SDA hold time value i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,6/8] i2c: designware: Separate timing parameter setting from HW initalization i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,5/8] i2c: designware: Move SDA hold time configuration to common code i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,4/8] i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,3/8] i2c: designware: Don't use internal ___constant_swab32 i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,2/8] i2c: designware: Move register access detection to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-11 Jarkko Nikula New
[v3,1/8] i2c: designware: Remove needless variable from i2c_dw_init_slave() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-11 Jarkko Nikula New
[2/2] i2c: Add multi-instantiate pseudo driver [1/2] i2c: Add new I2C_CLIENT_IGNORE_BUSY flag - - - - 0 0 0 2018-06-08 Hans de Goede New
[1/2] i2c: Add new I2C_CLIENT_IGNORE_BUSY flag [1/2] i2c: Add new I2C_CLIENT_IGNORE_BUSY flag - - - - 0 0 0 2018-06-08 Hans de Goede New
[v3,12/12] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. cros_ec: Match licenses and switch to SPDX identifier. - - - - 0 0 0 2018-06-06 Enric Balletbo i Serra New
[v2,8/8] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. cros_ec: Switch to SPDX identifier. - - - - 0 0 0 2018-06-05 Enric Balletbo i Serra New
i2c: mux: pca954x: Use helper variable in probe i2c: mux: pca954x: Use helper variable in probe - - - - 0 0 0 2018-06-05 Linus Walleij peda New
[9/9] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. croc_ec: Switch to SPDX identifier - - - - 0 0 0 2018-06-05 Enric Balletbo i Serra New
[v9,7/7] i2c: fsi: Add bus recovery i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,6/7] i2c: fsi: Add I2C master locking i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,5/7] i2c: fsi: Add transfer implementation i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,4/7] i2c: fsi: Add abort and hardware reset procedures i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,3/7] i2c: fsi: Add port structures i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,2/7] i2c: Add FSI-attached I2C master algorithm i2c: Add FSI-attached I2C master algorithm - - - - 0 0 0 2018-06-04 Eddie James New
[v9,1/7] dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation i2c: Add FSI-attached I2C master algorithm 1 - - - 0 0 0 2018-06-04 Eddie James New
[2/2] i2c: gpio: fault-injector: add incomplete_write_byte i2c: gpio: fault-injector: add new injector - - - - 0 0 0 2018-06-04 Wolfram Sang New
[1/2] i2c: gpio: fault-injector: refactor incomplete transfer i2c: gpio: fault-injector: add new injector - - - - 0 0 0 2018-06-04 Wolfram Sang New
[v2,8/8] i2c: designware: Add debug print for bus speed i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,7/8] i2c: designware: Add debug print for SDA hold time value i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,6/8] i2c: designware: Separate timing parameter setting from HW initalization i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,5/8] i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master() i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,4/8] i2c: designware: Move SDA hold time configuration to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,3/8] i2c: designware: Don't use internal ___constant_swab32 i2c: designware: Improve debug prints - - - - 0 0 0 2018-06-01 Jarkko Nikula New
[v2,2/8] i2c: designware: Move register access detection to common code i2c: designware: Improve debug prints - - 1 - 0 0 0 2018-06-01 Jarkko Nikula New
« 1 2 3 4 »