Show patches with: Archived = No       |   13317 patches
« 1 2 3 4133 134 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
i2c: stm32f7: remove noisy and imprecise log messages i2c: stm32f7: remove noisy and imprecise log messages - - - - --- 2021-11-30 Wolfram Sang New
[v3] i2c: i801: Improve handling platform data for tco device [v3] i2c: i801: Improve handling platform data for tco device - - 1 - --- 2021-11-29 Heiner Kallweit Accepted
[v2] i2c: cadence: Add standard bus recovery support [v2] i2c: cadence: Add standard bus recovery support 1 - - - --- 2021-11-29 Shubhrajyoti Datta Under Review
eeprom: at24: remove struct at24_client eeprom: at24: remove struct at24_client - - - - --- 2021-11-28 Heiner Kallweit brgl Needs Review / ACK
[8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Rejected
[6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[5/8] tty: serial: samsung: Enable console as module soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[4/8] tty: serial: samsung: Remove USI initialization soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[3/8] soc: samsung: Add USIv2 driver soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
[1/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings soc: samsung: Add USIv2 driver - - - - --- 2021-11-27 Sam Protsenko Not Applicable
i2c: cbus-gpio: set atomic transfer callback i2c: cbus-gpio: set atomic transfer callback - 1 - - --- 2021-11-27 Aaro Koskinen Accepted
[PULL,REQUEST] i2c for v5.16 [PULL,REQUEST] i2c for v5.16 - - - - --- 2021-11-26 Wolfram Sang Accepted
[V6,7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board dt-bindinds/dts: support i.MX8ULP - - 1 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp dt-bindinds/dts: support i.MX8ULP - - 2 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,4/7] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 2 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,2/7] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-26 Peng Fan (OSS) Not Applicable
[V6,1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-26 Peng Fan (OSS) Accepted
[v6,15/15] media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - - - --- 2021-11-25 Hans de Goede Not Applicable
[v6,14/15] media: ipu3-cio2: Call cio2_bridge_init() before anything else Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - - - --- 2021-11-25 Hans de Goede Not Applicable
[v6,13/15] media: ipu3-cio2: Defer probing until the PMIC is fully setup Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - - - --- 2021-11-25 Hans de Goede Not Applicable
[v6,12/15] platform/x86: int3472: Deal with probe ordering issues Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,11/15] platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator M… Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,10/15] platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,09/15] platform/x86: int3472: Add get_sensor_adev_and_name() helper Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,08/15] platform/x86: int3472: Split into 2 drivers Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,07/15] platform/x86: int3472: Enable I2c daisy chain Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,06/15] clk: Introduce clk-tps68470 driver Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,05/15] regulator: Introduce tps68470-regulator driver Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,04/15] platform_data: Add linux/platform_data/tps68470.h file Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data - - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v6,03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data 2 - 1 - --- 2021-11-25 Hans de Goede Awaiting Upstream
[v6,02/15] i2c: acpi: Use acpi_dev_ready_for_enumeration() helper Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data 3 - 1 - --- 2021-11-25 Hans de Goede Awaiting Upstream
[v6,01/15] ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data 1 - 1 - --- 2021-11-25 Hans de Goede Not Applicable
[v4] i2c: tegra: Add the ACPI support [v4] i2c: tegra: Add the ACPI support - - 1 - --- 2021-11-25 Akhil R Accepted
[v3] i2c: tegra: Add the ACPI support [v3] i2c: tegra: Add the ACPI support - - - - --- 2021-11-25 Akhil R Superseded
[v2] i2c: tegra: Add ACPI support [v2] i2c: tegra: Add ACPI support - - - - --- 2021-11-23 Akhil R Superseded
[v2,2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles Apple Arm patform device tree and bindings fixes 2 1 2 - --- 2021-11-22 Janne Grunau Awaiting Upstream
[2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles Apple Arm patform device tree and bindings fixes - 1 1 - --- 2021-11-21 Janne Grunau Superseded
[v2,2/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies [v2,1/2] arm64: defconfig: Enable Samsung I2C driver 1 - - - --- 2021-11-21 Sam Protsenko Awaiting Upstream
[v2,1/2] arm64: defconfig: Enable Samsung I2C driver [v2,1/2] arm64: defconfig: Enable Samsung I2C driver - - - - --- 2021-11-21 Sam Protsenko Not Applicable
[V5,8/8] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board dt-bindinds/dts: support i.MX8ULP - - 1 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,7/8] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp dt-bindinds/dts: support i.MX8ULP - - 2 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,6/8] dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,5/8] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 2 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,4/8] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,3/8] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,2/8] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-20 Peng Fan (OSS) Not Applicable
[V5,1/8] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-20 Peng Fan (OSS) Superseded
[v2] i2c: i801: Improve handling of chip-specific feature definitions [v2] i2c: i801: Improve handling of chip-specific feature definitions - - 1 1 --- 2021-11-19 Heiner Kallweit Accepted
i2c: tegra: Add ACPI support i2c: tegra: Add ACPI support - - - - --- 2021-11-19 Akhil R Superseded
[v2] Docs: Fixes link to I2C specification [v2] Docs: Fixes link to I2C specification - - - - --- 2021-11-19 Deep Majumder Under Review
[v2] i2c: i801: Remove i801_set_block_buffer_mode [v2] i2c: i801: Remove i801_set_block_buffer_mode - - 1 1 --- 2021-11-18 Heiner Kallweit Accepted
[RESUBMIT] i2c: cadence: Add standard bus recovery support [RESUBMIT] i2c: cadence: Add standard bus recovery support 1 - - - --- 2021-11-17 Robert Hancock Superseded
[v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal [v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal - - 1 1 --- 2021-11-17 Jarkko Nikula Accepted
[v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL [v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL - - 2 - --- 2021-11-16 Shreeya Patel Not Applicable
[v3] gpio: Return EPROBE_DEFER if gc->to_irq is NULL [v3] gpio: Return EPROBE_DEFER if gc->to_irq is NULL - - 2 - --- 2021-11-15 Shreeya Patel Not Applicable
[v1,3/3] i2c: mux: gpio: Use array_size() helper [v1,1/3] i2c: mux: gpio: Replace custom acpi_get_local_address() 1 - 1 - --- 2021-11-15 Andy Shevchenko Accepted
[v1,2/3] i2c: mux: gpio: Don't dereference fwnode from struct device [v1,1/3] i2c: mux: gpio: Replace custom acpi_get_local_address() 1 - 1 - --- 2021-11-15 Andy Shevchenko Accepted
[v1,1/3] i2c: mux: gpio: Replace custom acpi_get_local_address() [v1,1/3] i2c: mux: gpio: Replace custom acpi_get_local_address() 1 - 1 - --- 2021-11-15 Andy Shevchenko Accepted
docs: i2c: smbus-protocol: mention the repeated start condition docs: i2c: smbus-protocol: mention the repeated start condition - - - - --- 2021-11-15 Miquel Raynal Accepted
i2c: designware: Get HCNT/LCNT values from dts i2c: designware: Get HCNT/LCNT values from dts - - - - --- 2021-11-15 Wang, Lawrence (NSB - CN/Hangzhou) Rejected
[net-next,v3,6/6] mctp i2c: MCTP I2C binding driver MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[net-next,v3,5/6] dt-bindings: net: New binding mctp-i2c-controller MCTP I2C driver - - 1 - --- 2021-11-15 Matt Johnston New
[net-next,v3,4/6] i2c: npcm7xx: Allow 255 byte block SMBus transfers MCTP I2C driver - - 2 - --- 2021-11-15 Matt Johnston New
[net-next,v3,3/6] i2c: aspeed: Allow 255 byte block transfers MCTP I2C driver - - 1 - --- 2021-11-15 Matt Johnston New
[net-next,v3,2/6] i2c: dev: Handle 255 byte blocks for i2c ioctl MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[net-next,v3,1/6] i2c: core: Allow 255 byte transfers for SMBus 3.x MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[v2,20/20] extcon: intel-cht-wc: Report RID_A for ACA adapters power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,19/20] extcon: intel-cht-wc: Add support for registering a power_supply class-device power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger() power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,16/20] extcon: intel-cht-wc: Use new intel_cht_wc_get_model() helper power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook 1 - - - --- 2021-11-14 Hans de Goede Awaiting Upstream
[v2,14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,12/20] power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regula… power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - 1 - --- 2021-11-14 Hans de Goede Not Applicable
[v2,10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,09/20] power: supply: bq25890: Drop dev->platform_data == NULL check power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - 1 - --- 2021-11-14 Hans de Goede Not Applicable
[v2,08/20] power: supply: bq25890: Enable charging on boards where we skip reset power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,07/20] power: supply: bq25890: Add support to read back the settings from the chip power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,06/20] power: supply: bq25890: Add support to skip reset at probe() / remove() power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,05/20] power: supply: bq25890: Add a bq25890_rw_init_data() helper power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,03/20] power: supply: bq25890: Rename IILIM field to IINLIM power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - 1 - --- 2021-11-14 Hans de Goede Not Applicable
[v2,02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - 1 1 - --- 2021-11-14 Hans de Goede Not Applicable
[v2,01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier() power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook - - - - --- 2021-11-14 Hans de Goede Not Applicable
[v2,2/2] i2c:imx: Add an extra read at the end of an I2C slave read i2c:imx: Deliver a timely stop on slave side, fix recv - - 2 1 --- 2021-11-12 Corey Minyard Under Review
[v2,1/2] i2c:imx: Add timer for handling the stop condition i2c:imx: Deliver a timely stop on slave side, fix recv - - 2 1 --- 2021-11-12 Corey Minyard Accepted
[v1,1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev [v1,1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev 2 - - - --- 2021-11-12 Andy Shevchenko Accepted
[V5,9/9] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board dt-bindinds/dts: support i.MX8ULP - - 1 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V5,8/9] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp dt-bindinds/dts: support i.MX8ULP - - 2 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V4,7/9] dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V4,6/9] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 2 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V4,5/9] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V4,4/9] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-12 Peng Fan (OSS) Superseded
[V4,3/9] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindinds/dts: support i.MX8ULP 1 - 1 - --- 2021-11-12 Peng Fan (OSS) Superseded
« 1 2 3 4133 134 »