| Message ID | 1362733696.30287.145.camel@genx |
|---|---|
| State | Superseded |
| Headers | show |
Hi John, 2013/3/8 John Stile <john@stilen.com>: > dhcpcd: new package > > Dhcpcd is an RFC2131 compliant DHCP client. > > Signed-off-by: John Stile <john@stilen.com> > --- > package/Config.in | 1 + > package/dhcpcd/Config.in | 5 +++++ > package/dhcpcd/dhcpcd.mk | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 54 insertions(+) > create mode 100644 package/dhcpcd/Config.in > create mode 100644 package/dhcpcd/dhcpcd.mk > > diff --git a/package/Config.in b/package/Config.in > index 22e64f8..924b464 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -633,6 +633,7 @@ source "package/cups/Config.in" > if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS > source "package/dhcp/Config.in" > endif > +source "package/dhcpcd/Config.in" > source "package/dhcpdump/Config.in" > source "package/dnsmasq/Config.in" > source "package/dropbear/Config.in" > diff --git a/package/dhcpcd/Config.in b/package/dhcpcd/Config.in > new file mode 100644 > index 0000000..3855c6a > --- /dev/null > +++ b/package/dhcpcd/Config.in > @@ -0,0 +1,5 @@ > +config BR2_PACKAGE_DHCPCD > + bool "dhcpcd" > + help > + An RFC2131 compliant DHCP client > + NOTE: If uClibc, depends on UCLIBC_SUPPORT_AI_ADDRCONFIG=y I am not sure this is needed, as this option is now enabled by default. > diff --git a/package/dhcpcd/dhcpcd.mk b/package/dhcpcd/dhcpcd.mk > new file mode 100644 > index 0000000..c7aa82e > --- /dev/null > +++ b/package/dhcpcd/dhcpcd.mk > @@ -0,0 +1,48 @@ > +############################################################# > +# > +# dhcpcd > +# > +############################################################# > + > +DHCPCD_VERSION = 5.6.7 > +DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2 > +DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/ > +DHCPCD_LICENSE = BSD-2c > + > +ifeq ($(BR2_USE_MMU),n) > + DHCPCD_CONFIG_OPT += --disable-fork > +endif > + > +ifeq ($(BR2_INET_IPV6),) > + DHCPCD_CFLAGS += -UHASIPv6 > +endif What are you trying to achieve here? I am not sure IPv6 can be disabled at compile time in this package. Have you tried building it with a toolchain that does not support IPv6? > + > +define DHCPCD_CONFIGURE_CMDS > + (cd $(@D); \ > + ./configure \ > + --target=$(BR2_GCC_TARGET_ARCH) \ > + --os=linux \ > + $(DHCPCD_CONFIG_OPT) ) > +endef > + > +define DHCPCD_BUILD_CMDS > + $(MAKE) \ > + $(TARGET_CONFIGURE_OPTS) \ > + $(DHCPCD_CFLAGS) \ Shouldn'it it be something like CFLAGS = $(DHCPCD_FLAGS) or "whatever" FLAGS = $(DHCPCD_FLAGS) Gilles.
Dear John Stile, On Fri, 08 Mar 2013 01:08:16 -0800, John Stile wrote: > dhcpcd: new package This line should be the title of the e-mail, as it will become the title of the patch once applied. Please use 'git send-email' to send your patches, it will make sure that everything is done properly, and will save you a lot of issues. > Dhcpcd is an RFC2131 compliant DHCP client. > > Signed-off-by: John Stile <john@stilen.com> > --- > package/Config.in | 1 + > package/dhcpcd/Config.in | 5 +++++ > package/dhcpcd/dhcpcd.mk | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 54 insertions(+) > create mode 100644 package/dhcpcd/Config.in > create mode 100644 package/dhcpcd/dhcpcd.mk > > diff --git a/package/Config.in b/package/Config.in > index 22e64f8..924b464 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -633,6 +633,7 @@ source "package/cups/Config.in" > if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS > source "package/dhcp/Config.in" > endif > +source "package/dhcpcd/Config.in" > source "package/dhcpdump/Config.in" > source "package/dnsmasq/Config.in" > source "package/dropbear/Config.in" > diff --git a/package/dhcpcd/Config.in b/package/dhcpcd/Config.in > new file mode 100644 > index 0000000..3855c6a > --- /dev/null > +++ b/package/dhcpcd/Config.in > @@ -0,0 +1,5 @@ > +config BR2_PACKAGE_DHCPCD > + bool "dhcpcd" > + help > + An RFC2131 compliant DHCP client > + NOTE: If uClibc, depends on UCLIBC_SUPPORT_AI_ADDRCONFIG=y As Gilles said, this note is useless, since AI_ADDRCONFIG is enabled by default. Also, after this help text, leave one blank line, and add the upstream URL of the project. See all other Config.in files for packages in Buildroot's tree. See also http://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_file > diff --git a/package/dhcpcd/dhcpcd.mk b/package/dhcpcd/dhcpcd.mk > new file mode 100644 > index 0000000..c7aa82e > --- /dev/null > +++ b/package/dhcpcd/dhcpcd.mk > @@ -0,0 +1,48 @@ > +############################################################# > +# > +# dhcpcd > +# > +############################################################# > + > +DHCPCD_VERSION = 5.6.7 > +DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2 > +DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/ > +DHCPCD_LICENSE = BSD-2c > + > +ifeq ($(BR2_USE_MMU),n) I already told you this would have no effect. BR2_USE_MMU is either 'y' or empty. So it should be: ifeq ($(BR2_USE_MMU),) > + DHCPCD_CONFIG_OPT += --disable-fork > +endif > + > +ifeq ($(BR2_INET_IPV6),) > + DHCPCD_CFLAGS += -UHASIPv6 > +endif I grepped through the entire dhcpcd source tree, and I haven't seen this HASIPv6 thing mentioned anywhere. Where did you get this from? > + > +define DHCPCD_CONFIGURE_CMDS > + (cd $(@D); \ > + ./configure \ > + --target=$(BR2_GCC_TARGET_ARCH) \ > + --os=linux \ > + $(DHCPCD_CONFIG_OPT) ) We usually indent the subsequent lines with one more tab: (cd $(@D); \ ./configure \ --target=$(BR2_GCC_TARGET_ARCH) \ --os=linux \ $(DHCPCD_CONFIG_OPT)) > +endef > + > +define DHCPCD_BUILD_CMDS > + $(MAKE) \ > + $(TARGET_CONFIGURE_OPTS) \ > + $(DHCPCD_CFLAGS) \ > + -C $(@D) all Ditto here. Also, as Gilles noted, if DHPCD_FLAGS expands to -UHASIPv6, then your build will break: -UHASIPv6 is not a valid option for make. > +define DHCPCD_INSTALL_TARGET_CMDS > + $(INSTALL) -D -m 0755 $(@D)/dhcpcd \ > + $(TARGET_DIR)/usr/bin/dhcpcd Intend the subsequent line with one tab. $(INSTALL) -D -m 0755 $(@D)/dhcpcd \ $(TARGET_DIR)/usr/bin/dhcpcd > + $(INSTALL) -D -m 0644 $(@D)/dhcpcd.conf \ > + $(TARGET_DIR)/etc/dhcpcd.conf > + $(INSTALL) -D -m 0755 $(@D)/dhcpcd-run-hooks \ > + $(TARGET_DIR)/libexec/dhcpcd-run-hooks > +endef > + > +# NOTE: Even though this package has a configure script, it is not generated > +# using the autotools, so we have to use the generic package infrastructure. > + > +$(eval $(call generic-package)) > + Thanks, Thomas
Dear Thomas Petazzoni, On Sat, 2013-03-09 at 16:58 +0100, Thomas Petazzoni wrote: > Dear John Stile, > > On Fri, 08 Mar 2013 01:08:16 -0800, John Stile wrote: > > dhcpcd: new package > > This line should be the title of the e-mail, as it will become the > title of the patch once applied. Please use 'git send-email' to send > your patches, it will make sure that everything is done properly, and > will save you a lot of issues. > I wasn't able to figure out how to get this working with my email server, but I'll give it another shot. I simply tried to save the email, and then use my normal client to send it. > > Dhcpcd is an RFC2131 compliant DHCP client. > > > > Signed-off-by: John Stile <john@stilen.com> > > --- > > package/Config.in | 1 + > > package/dhcpcd/Config.in | 5 +++++ > > package/dhcpcd/dhcpcd.mk | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 54 insertions(+) > > create mode 100644 package/dhcpcd/Config.in > > create mode 100644 package/dhcpcd/dhcpcd.mk > > > > diff --git a/package/Config.in b/package/Config.in > > index 22e64f8..924b464 100644 > > --- a/package/Config.in > > +++ b/package/Config.in > > @@ -633,6 +633,7 @@ source "package/cups/Config.in" > > if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS > > source "package/dhcp/Config.in" > > endif > > +source "package/dhcpcd/Config.in" > > source "package/dhcpdump/Config.in" > > source "package/dnsmasq/Config.in" > > source "package/dropbear/Config.in" > > diff --git a/package/dhcpcd/Config.in b/package/dhcpcd/Config.in > > new file mode 100644 > > index 0000000..3855c6a > > --- /dev/null > > +++ b/package/dhcpcd/Config.in > > @@ -0,0 +1,5 @@ > > +config BR2_PACKAGE_DHCPCD > > + bool "dhcpcd" > > + help > > + An RFC2131 compliant DHCP client > > + NOTE: If uClibc, depends on UCLIBC_SUPPORT_AI_ADDRCONFIG=y > > As Gilles said, this note is useless, since AI_ADDRCONFIG is enabled by > default. > My particular configuration did not have this enabled, and my particular uclibc configuration was simply copied from something I got from an atmel site. Since I tripped over this ladder in a dark room, I thought a note could be enlightening for the next person, since I can't make a dependency in the kconfig. Should I still remove it? > Also, after this help text, leave one blank line, and add the upstream > URL of the project. See all other Config.in files for packages in > Buildroot's tree. See also > http://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_file > Sounds good. > > diff --git a/package/dhcpcd/dhcpcd.mk b/package/dhcpcd/dhcpcd.mk > > new file mode 100644 > > index 0000000..c7aa82e > > --- /dev/null > > +++ b/package/dhcpcd/dhcpcd.mk > > @@ -0,0 +1,48 @@ > > +############################################################# > > +# > > +# dhcpcd > > +# > > +############################################################# > > + > > +DHCPCD_VERSION = 5.6.7 > > +DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2 > > +DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/ > > +DHCPCD_LICENSE = BSD-2c > > + > > +ifeq ($(BR2_USE_MMU),n) > > I already told you this would have no effect. BR2_USE_MMU is either 'y' > or empty. So it should be: > > ifeq ($(BR2_USE_MMU),) > Whoops. My regression. Sorry. > > + DHCPCD_CONFIG_OPT += --disable-fork > > +endif > > + > > +ifeq ($(BR2_INET_IPV6),) > > + DHCPCD_CFLAGS += -UHASIPv6 > > +endif > > I grepped through the entire dhcpcd source tree, and I haven't seen > this HASIPv6 thing mentioned anywhere. Where did you get this from? > I used the package lsof-4.85 as an example, but I guess it's used of HASIPv6 is isolated, so I will remove it. > > + > > +define DHCPCD_CONFIGURE_CMDS > > + (cd $(@D); \ > > + ./configure \ > > + --target=$(BR2_GCC_TARGET_ARCH) \ > > + --os=linux \ > > + $(DHCPCD_CONFIG_OPT) ) > > We usually indent the subsequent lines with one more tab: > > (cd $(@D); \ > ./configure \ > --target=$(BR2_GCC_TARGET_ARCH) \ > --os=linux \ > $(DHCPCD_CONFIG_OPT)) > > > +endef > > + > > +define DHCPCD_BUILD_CMDS > > + $(MAKE) \ > > + $(TARGET_CONFIGURE_OPTS) \ > > + $(DHCPCD_CFLAGS) \ > > + -C $(@D) all > > Ditto here. > > Also, as Gilles noted, if DHPCD_FLAGS expands to -UHASIPv6, then your > build will break: -UHASIPv6 is not a valid option for make. > > > +define DHCPCD_INSTALL_TARGET_CMDS > > + $(INSTALL) -D -m 0755 $(@D)/dhcpcd \ > > + $(TARGET_DIR)/usr/bin/dhcpcd > > Intend the subsequent line with one tab. > > $(INSTALL) -D -m 0755 $(@D)/dhcpcd \ > $(TARGET_DIR)/usr/bin/dhcpcd > > > + $(INSTALL) -D -m 0644 $(@D)/dhcpcd.conf \ > > + $(TARGET_DIR)/etc/dhcpcd.conf > > + $(INSTALL) -D -m 0755 $(@D)/dhcpcd-run-hooks \ > > + $(TARGET_DIR)/libexec/dhcpcd-run-hooks > > +endef > > + > > +# NOTE: Even though this package has a configure script, it is not generated > > +# using the autotools, so we have to use the generic package infrastructure. > > + > > +$(eval $(call generic-package)) > > + > > Thanks, > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com
diff --git a/package/Config.in b/package/Config.in index 22e64f8..924b464 100644 --- a/package/Config.in +++ b/package/Config.in @@ -633,6 +633,7 @@ source "package/cups/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/dhcp/Config.in" endif +source "package/dhcpcd/Config.in" source "package/dhcpdump/Config.in" source "package/dnsmasq/Config.in" source "package/dropbear/Config.in" diff --git a/package/dhcpcd/Config.in b/package/dhcpcd/Config.in new file mode 100644 index 0000000..3855c6a --- /dev/null +++ b/package/dhcpcd/Config.in @@ -0,0 +1,5 @@ +config BR2_PACKAGE_DHCPCD + bool "dhcpcd" + help + An RFC2131 compliant DHCP client + NOTE: If uClibc, depends on UCLIBC_SUPPORT_AI_ADDRCONFIG=y diff --git a/package/dhcpcd/dhcpcd.mk b/package/dhcpcd/dhcpcd.mk new file mode 100644 index 0000000..c7aa82e --- /dev/null +++ b/package/dhcpcd/dhcpcd.mk @@ -0,0 +1,48 @@ +############################################################# +# +# dhcpcd +# +############################################################# + +DHCPCD_VERSION = 5.6.7 +DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2 +DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/ +DHCPCD_LICENSE = BSD-2c + +ifeq ($(BR2_USE_MMU),n) + DHCPCD_CONFIG_OPT += --disable-fork +endif + +ifeq ($(BR2_INET_IPV6),) + DHCPCD_CFLAGS += -UHASIPv6 +endif + +define DHCPCD_CONFIGURE_CMDS + (cd $(@D); \ + ./configure \ + --target=$(BR2_GCC_TARGET_ARCH) \ + --os=linux \ + $(DHCPCD_CONFIG_OPT) ) +endef + +define DHCPCD_BUILD_CMDS + $(MAKE) \ + $(TARGET_CONFIGURE_OPTS) \ + $(DHCPCD_CFLAGS) \ + -C $(@D) all +endef + +define DHCPCD_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/dhcpcd \ + $(TARGET_DIR)/usr/bin/dhcpcd + $(INSTALL) -D -m 0644 $(@D)/dhcpcd.conf \ + $(TARGET_DIR)/etc/dhcpcd.conf + $(INSTALL) -D -m 0755 $(@D)/dhcpcd-run-hooks \ + $(TARGET_DIR)/libexec/dhcpcd-run-hooks +endef + +# NOTE: Even though this package has a configure script, it is not generated +# using the autotools, so we have to use the generic package infrastructure. + +$(eval $(call generic-package)) +
dhcpcd: new package Dhcpcd is an RFC2131 compliant DHCP client. Signed-off-by: John Stile <john@stilen.com> --- package/Config.in | 1 + package/dhcpcd/Config.in | 5 +++++ package/dhcpcd/dhcpcd.mk | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+) create mode 100644 package/dhcpcd/Config.in create mode 100644 package/dhcpcd/dhcpcd.mk