| Message ID | 1355776546-25189-1-git-send-email-marek.belisko@open-nandra.com |
|---|---|
| State | Superseded |
| Headers | show |
On 17/12/12 21:35, Marek Belisko wrote: > Signed-off-by: Marek Belisko<marek.belisko@open-nandra.com> [snip] > diff --git a/package/sg3_utils/Config.in b/package/sg3_utils/Config.in > new file mode 100644 > index 0000000..1d2ab2a > --- /dev/null > +++ b/package/sg3_utils/Config.in > @@ -0,0 +1,7 @@ > +config BR2_PACKAGE_SG3_UTILS > + bool "sg3_utils" depends on BR2_LARGEFILE depends on BR2_TOOLCHAIN_HAS_THREADS (actually only sgp_dd needs threads so that could be patched out in the Makefile). Not sure about IPv6. Otherwise, looks good. Regards, Arnout
Dear Marek Belisko,
On Mon, 17 Dec 2012 21:35:46 +0100, Marek Belisko wrote:
> +SG3_UTILS_INSTALL_STAGING = YES
Hum, why is this needed? Does sg3_utils installs some libraries or
headers that are useful for other packages?
Thanks,
Thomas
Hi Thomas, On Tue, Dec 18, 2012 at 9:48 AM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Dear Marek Belisko, > > On Mon, 17 Dec 2012 21:35:46 +0100, Marek Belisko wrote: > >> +SG3_UTILS_INSTALL_STAGING = YES > > Hum, why is this needed? Does sg3_utils installs some libraries or > headers that are useful for other packages? I'm working on adding udisks to buildroot and udisks have dependency on sg3-utils library so this is the reason why installing to staging. I've read somewhere on ML you was working also on udisks package. Was it successful? > > Thanks, > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com Cheers, mbe
Dear Belisko Marek, On Tue, 18 Dec 2012 09:52:41 +0100, Belisko Marek wrote: > > Hum, why is this needed? Does sg3_utils installs some libraries or > > headers that are useful for other packages? > I'm working on adding udisks to buildroot and udisks have dependency on > sg3-utils library so this is the reason why installing to staging. Ok. A comment just before the _INSTALL_STAGING line would be useful, then, because for a "utils" package, we don't necessarily expect to have a library in it. > I've read somewhere on ML you was working also on udisks package. > Was it successful? It was a looong time ago. I think I managed to get udisks to build, but I hadn't had the time to do some real testing with it: I was first doing some testing of polkit, which is a dependency of udisks. I've put online the 3 patches I had done at that time (note that they are old: they still use the old AUTOTARGETS macro name), see: http://free-electrons.com/~thomas/pub/udisks-buildroot/ Best regards, Thomas
Hi Thomas, On Tue, Dec 18, 2012 at 10:03 AM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Dear Belisko Marek, > > On Tue, 18 Dec 2012 09:52:41 +0100, Belisko Marek wrote: > >> > Hum, why is this needed? Does sg3_utils installs some libraries or >> > headers that are useful for other packages? >> I'm working on adding udisks to buildroot and udisks have dependency on >> sg3-utils library so this is the reason why installing to staging. > > Ok. A comment just before the _INSTALL_STAGING line would be useful, > then, because for a "utils" package, we don't necessarily expect to > have a library in it. > >> I've read somewhere on ML you was working also on udisks package. >> Was it successful? > > It was a looong time ago. I think I managed to get udisks to build, but > I hadn't had the time to do some real testing with it: I was first > doing some testing of polkit, which is a dependency of udisks. > > I've put online the 3 patches I had done at that time (note that they > are old: they still use the old AUTOTARGETS macro name), see: > http://free-electrons.com/~thomas/pub/udisks-buildroot/ Thanks for patches. I made small update and I can compile polkit without problems but I have still problems with udisks. Basically udisks have only autogen.sh script and I was trying to use: UDISKS_AUTORECONF = YES macro. With this change it fails during autoreconfiguring: configure.ac:13: the top level configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... configure.ac:225: the top level configure:14234: error: possibly undefined macro: AM_NLS If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. Am I missing some dependency? > > Best regards, > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com Thanks, marek
Dear Belisko Marek, On Wed, 19 Dec 2012 23:11:31 +0100, Belisko Marek wrote: > configure.ac:13: the top level > configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd > aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... > configure.ac:225: the top level > configure:14234: error: possibly undefined macro: AM_NLS > If this token and others are legitimate, please use m4_pattern_allow. > See the Autoconf documentation. > > Am I missing some dependency? I guess this macro is installed by gettext, but not sure. Thomas
Hi Thomas, On Wed, Dec 19, 2012 at 11:36 PM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Dear Belisko Marek, > > On Wed, 19 Dec 2012 23:11:31 +0100, Belisko Marek wrote: > >> configure.ac:13: the top level >> configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd >> aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... >> configure.ac:225: the top level >> configure:14234: error: possibly undefined macro: AM_NLS >> If this token and others are legitimate, please use m4_pattern_allow. >> See the Autoconf documentation. >> >> Am I missing some dependency? > > I guess this macro is installed by gettext, but not sure. Hmm it was my mistake somehow. I proceed forward but now have troubles in configuration phase: checking for LIBPARTED... yes checking for DEVMAPPER... no configure: error: Package requirements (devmapper >= 1.02) were not met: I choose BR2_PACKAGE_LVM2 and aso add dependency to lvm2 but error still exists. I was looking to stagin directory and libdevmapper is is /usr/lib. Not sure why it pkg-config cannot find. Ideas? > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com Thanks in advance, Marek
diff --git a/package/Config.in b/package/Config.in index d6af55d..269b3ff 100644 --- a/package/Config.in +++ b/package/Config.in @@ -253,6 +253,7 @@ source "package/rng-tools/Config.in" source "package/sane-backends/Config.in" source "package/sdparm/Config.in" source "package/setserial/Config.in" +source "package/sg3_utils/Config.in" source "package/smartmontools/Config.in" source "package/snowball-hdmiservice/Config.in" source "package/sredird/Config.in" diff --git a/package/sg3_utils/Config.in b/package/sg3_utils/Config.in new file mode 100644 index 0000000..1d2ab2a --- /dev/null +++ b/package/sg3_utils/Config.in @@ -0,0 +1,7 @@ +config BR2_PACKAGE_SG3_UTILS + bool "sg3_utils" + help + sg3_utils is a package of utilities that send SCSI commands to the + given <scsi_device> via a SCSI pass through. + + http://sg.danny.cz/sg/ diff --git a/package/sg3_utils/sg3_utils.mk b/package/sg3_utils/sg3_utils.mk new file mode 100644 index 0000000..2eba3d3 --- /dev/null +++ b/package/sg3_utils/sg3_utils.mk @@ -0,0 +1,10 @@ +############################################################# +# +# sg3_utils +# +############################################################# +SG3_UTILS_VERSION = 1.34 +SG3_UTILS_SITE = http://sg.danny.cz/sg/p/ +SG3_UTILS_INSTALL_STAGING = YES + +$(eval $(autotools-package))
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> --- package/Config.in | 1 + package/sg3_utils/Config.in | 7 +++++++ package/sg3_utils/sg3_utils.mk | 10 ++++++++++ 3 files changed, 18 insertions(+) create mode 100644 package/sg3_utils/Config.in create mode 100644 package/sg3_utils/sg3_utils.mk