diff mbox series

[4/5] net: dwc_eth_qos: add support for phy-reset-gpios property

Message ID 20240428142406.28445-4-heesub@gmail.com
State New
Delegated to: Patrice Chotard
Headers show
Series [1/5] dts: stm32mp157c-odyssey: set PLL4_P to 125Mhz for ETH_CLK | expand

Commit Message

Heesub Shin April 28, 2024, 2:24 p.m. UTC 
This commit adds support for a property 'phy-reset-gpios' to reset PHY
chipset.

Signed-off-by: Heesub Shin <heesub@gmail.com>
---
 drivers/net/dwc_eth_qos_stm32.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/dwc_eth_qos_stm32.c b/drivers/net/dwc_eth_qos_stm32.c
index fbc08bba1d..cffaa10b70 100644
--- a/drivers/net/dwc_eth_qos_stm32.c
+++ b/drivers/net/dwc_eth_qos_stm32.c
@@ -266,6 +266,12 @@  static int eqos_probe_resources_stm32(struct udevice *dev)
 	if (ret)
 		dev_warn(dev, "No phy clock provided %d\n", ret);
 
+	/* Get reset gpio pin (optional) */
+	ret = gpio_request_by_name(dev, "phy-reset-gpios", 0,
+				   &eqos->phy_reset_gpio, GPIOD_IS_OUT);
+	if (ret)
+		pr_warn("No phy reset gpio provided: %d\n", ret);
+
 	dev_dbg(dev, "%s: OK\n", __func__);
 
 	return 0;
@@ -277,6 +283,21 @@  err_probe:
 	return ret;
 }
 
+static int eqos_start_resets_stm32(struct udevice *dev)
+{
+	struct eqos_priv *eqos = dev_get_priv(dev);
+
+	debug("%s(dev=%p):\n", __func__, dev);
+
+	if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) {
+		dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
+		udelay(2);
+		dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
+	}
+
+	return 0;
+}
+
 static int eqos_remove_resources_stm32(struct udevice *dev)
 {
 	dev_dbg(dev, "%s:\n", __func__);
@@ -292,7 +313,7 @@  static struct eqos_ops eqos_stm32_ops = {
 	.eqos_probe_resources = eqos_probe_resources_stm32,
 	.eqos_remove_resources = eqos_remove_resources_stm32,
 	.eqos_stop_resets = eqos_null_ops,
-	.eqos_start_resets = eqos_null_ops,
+	.eqos_start_resets = eqos_start_resets_stm32,
 	.eqos_stop_clks = eqos_stop_clks_stm32,
 	.eqos_start_clks = eqos_start_clks_stm32,
 	.eqos_calibrate_pads = eqos_null_ops,