Show patches with: Submitter = Hans de Goede       |    Archived = No       |   907 patches
« 1 2 ... 6 7 8 … 9 10 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot] sunxi: Fix PLL1 running at half speed on sun8i 1 - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,v2] sunxi: video: Fallback from HDMI to VGA on boards with VGA 1 - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,4/4] sunxi: video: Add VGA output support - - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,3/4] sunxi: video: Fallback from HDMI to VGA on boards with VGA - - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,2/4] sunxi: video: Add support for using PORTD hsync/vsync pins with tcon1 1 - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,1/4] sunxi: video: Fix tcon0 hsync / vsync setting 1 - - - --- 2014-12-27 Hans de Goede ijc Accepted
[U-Boot,17/17] sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,16/17] sunxi: video: Remove sunxi_display.enabled variable 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,15/17] sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets. - - - 1 --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,14/17] sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards - - - - --- 2014-12-24 Hans de Goede ijc Rejected
[U-Boot,13/17] sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,12/17] sunxi: sunxi-common.h: Reduce bootm_size to take the framebuffer into account 1 - - - --- 2014-12-24 Hans de Goede ijc Superseded
[U-Boot,11/17] sunxi: video: Add support for VGA via external DACs connected to the LCD pins 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,10/17] sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23 - - - - --- 2014-12-24 Hans de Goede ijc Superseded
[U-Boot,09/17] sunxi: video: Add lcd output support - - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,08/17] sunxi: video: Move sunxi_drc_init 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,07/17] sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,06/17] sunxi: video: Prepare for lcd support 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,05/17] sunxi: video: Improve monitor video-mode option handling - - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,04/17] sunxi: video: Drop disabling of backend / lcdc / hdmi encoder on modeset 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,03/17] sunxi: gpio: Add support for gpio pins on the AXP209 pmic - - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,02/17] sunxi: gpio: Properly sort mux defines by port number 1 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot,01/17] videomodes: Add support for refresh and pclk_khz to video_get_params() 2 - - - --- 2014-12-24 Hans de Goede ijc Accepted
[U-Boot] L2 cache and LCD on sunxi - - - - --- 2014-12-22 Hans de Goede Not Applicable
[U-Boot,6/6] sunxi: video: Set input sync enable 2 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,5/6] sunxi: video: Give hotplug-detect (hpd) signal some time to show up 2 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,4/6] sunxi: video: When using edid use CEA681 extension blocks to select hdmi output 2 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,3/6] sunxi: video: Add sunxi_hdmi_edid_get_block helper function 2 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,2/6] sunxi: video: Add hdmi support 2 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,1/6] edid: Add struct and defines for cea681 extension blocks 1 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,v2,4/4] sun8i: Ippo_q8h_v5_defconfig: Enable SPL support 1 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,v2,3/4] sun8i: Add dram initialization support - - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,v2,2/4] sunxi: Add support for the rsb (Reduced Serial Bus) 1 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,v2,1/4] sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/ 1 - - - --- 2014-12-20 Hans de Goede ijc Accepted
[U-Boot,v2,11/11] sunxi: video: Add DDC & EDID support 2 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,10/11] sunxi: video: Add hpd option 2 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,09/11] sunxi: video: Add support for video-mode environment variable 2 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,08/11] sunxi: video: Use video-mode/-timing from videomodes 2 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,07/11] edid: Add an edid_check_checksum() helper function 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,06/11] videomodes: Add video_edid_dtd_to_ctfb_res_modes helper function 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,05/11] videomodes: Add helper functions to parse video-mode env-var extra options 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,04/11] videomodes: Add video_get_ctfb_res_modes helper function 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,03/11] videomodes: Add a bunch of high res modes 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,02/11] videomodes: Add (vesa) standard timings 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,v2,01/11] videomodes: Add pixelclock_khz and refresh fields to ctfb_res_modes 1 - - - --- 2014-12-19 Hans de Goede ijc Accepted
[U-Boot,14/14] sun8i: Add defconfig for Ippo_q8h v1.2 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,13/14] sun8i: Add dram initialization support - - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,12/14] sunxi: Use memcmp for mctl_mem_matches 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,11/14] sunxi: Fill memory before comparing it when doing dram init on sun6i - - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,10/14] sunxi: Move await_completion dram helper to dram.h 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,09/14] sun6i: Add k and m parameters to clock_set_pll5() 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,08/14] sun6i: Add a sigma_delta_enable paramter to clock_set_pll5() 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,07/14] sunxi: axp221: Disable dcdc4 on sun8i (A23) 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,06/14] sunxi: axp221: Explicitly turn off unused voltages 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,05/14] sunxi: axp221: Make dcdc1 voltage configurable 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,04/14] sunxi: axp221: Add Kconfig help and sane defaults for typical ldo usage 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,03/14] sunxi: axp221: Add axp223 support 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,02/14] sunxi: Add support for the rsb (Reduced Serial Bus) - - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,01/14] sun6i: s/SUNXI_GPL0_R_P2WI/SUN6I_GPL0_R_P2WI/ 1 - - - --- 2014-12-16 Hans de Goede ijc Superseded
[U-Boot,resend,2/2] sunxi: Avoid usb getting scanned twice when using usb kbd + usb boot 1 - - - --- 2014-12-12 Hans de Goede jwrdegoede Superseded
[U-Boot,resend,1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot - - - - --- 2014-12-12 Hans de Goede jwrdegoede Superseded
[U-Boot,2/2] sunxi: mmc: Properly setup mod-clk and clock sampling phases 1 - - - --- 2014-12-07 Hans de Goede jwrdegoede Accepted
[U-Boot,1/2] sun6i: Update Colombus defconfig settings 1 - - - --- 2014-12-07 Hans de Goede jwrdegoede Accepted
[U-Boot,v2] fdt: Fix regression in fdt_pack_reg() 1 - - 3 --- 2014-11-28 Hans de Goede sjg Accepted
[U-Boot] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells(… - - - 2 --- 2014-11-27 Hans de Goede sjg Changes Requested
[U-Boot,2/2] sunxi: Add sunxi_get_sid helper function - - - - --- 2014-11-26 Hans de Goede ijc Accepted
[U-Boot,1/2] sun6i: axp221: Add axp221_get_sid function - - - - --- 2014-11-26 Hans de Goede ijc Accepted
[U-Boot] Please pull u-boot-sunxi master - - - - --- 2014-11-25 Hans de Goede trini Accepted
[U-Boot] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set 1 - - - --- 2014-11-24 Hans de Goede ijc Accepted
[U-Boot,5/5] sunxi: display: Add DDC & EDID support - - - - --- 2014-11-24 Hans de Goede jwrdegoede Accepted
[U-Boot,4/5] edid: Add an edid_check_checksum() helper function - - - - --- 2014-11-24 Hans de Goede ag Superseded
[U-Boot,3/5] edid: Add an edid_dtd_to_fbmode() helper function - - - - --- 2014-11-24 Hans de Goede ag Superseded
[U-Boot,2/5] sunxi: display: Do not use eprintf in early boot 2 - - - --- 2014-11-24 Hans de Goede ijc Accepted
[U-Boot,1/5] sunxi: display: Remove unused HDMI register addr defines 2 - - - --- 2014-11-24 Hans de Goede ijc Accepted
[U-Boot] sunxi: video: Add extra modes and allow selecting the mode via hdmi_mode env - - - - --- 2014-11-23 Hans de Goede ijc Changes Requested
[U-Boot,v2,5/5] sun6i: Add new CSQ_CS908 board 1 - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,v2,4/5] sun6i: Drop some "unknown magic" from dram init 1 - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,v2,3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s 1 - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,v2,2/5] sun6i: Add sunxi_get_ss_bonding_id() function 1 - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,v2,1/5] sun6i: Make dram clk and zq value Kconfig options 1 - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,v2,1/5] sun6i: Make dram clk and zq value Kconfig options - - - - --- 2014-11-23 Hans de Goede ijc Accepted
[U-Boot,2/2] sunxi: Avoid usb getting scanned twice when using usb kbd + usb boot - - - - --- 2014-11-23 Hans de Goede ijc Superseded
[U-Boot,1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot - - - - --- 2014-11-23 Hans de Goede ijc Superseded
[U-Boot] sunxi: correct Mele M9 Vbus gpio settings 1 - - - --- 2014-11-23 Hans de Goede jwrdegoede Accepted
[U-Boot] sunxi: Use "usb start" rather then "run usb_init" for preboot with usb-kbd 1 - - - --- 2014-11-23 Hans de Goede jwrdegoede Accepted
[U-Boot] sun6i: Add gmac support for sun6i boards 1 - - - --- 2014-11-21 Hans de Goede ijc Accepted
[U-Boot] Please pull u-boot-sunxi/master into master - - - - --- 2014-11-20 Hans de Goede trini Superseded
[U-Boot] config_distro_bootcmd: Avoid scanning usb twice (under some circumstances) - - - - --- 2014-11-20 Hans de Goede jwrdegoede Superseded
[U-Boot,v5,3/3] sunxi: video: Add simplefb support 1 - - - --- 2014-11-19 Hans de Goede jwrdegoede Accepted
[U-Boot,v5,2/3] common/lcd: Make lcd_dt_simplefb_configure_node use fdt_setup_simplefb_node 1 - - - --- 2014-11-19 Hans de Goede jwrdegoede Accepted
[U-Boot,v5,1/3] fdt_support: Add a fdt_setup_simplefb_node helper function 1 - - 1 --- 2014-11-19 Hans de Goede jwrdegoede Accepted
[U-Boot,v4,2/2] sunxi: video: Add simplefb support - - - - --- 2014-11-17 Hans de Goede ijc Superseded
[U-Boot,v4,1/2] fdt_support: Add a fdt_setup_simplefb_node helper function - - - - --- 2014-11-17 Hans de Goede ijc Superseded
[U-Boot,v3] sunxi: video: Add simplefb support - - - - --- 2014-11-16 Hans de Goede Superseded
[U-Boot,5/5] sun6i: Add new CSQ_CS908 board 1 - - - --- 2014-11-16 Hans de Goede ijc Superseded
[U-Boot,4/5] sun6i: Drop some "unknown magic" from dram init 1 - - - --- 2014-11-16 Hans de Goede ijc Superseded
[U-Boot,3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s - - - - --- 2014-11-16 Hans de Goede ijc Superseded
[U-Boot,2/5] sun6i: Add sunxi_get_ss_bonding_id() function 1 - - - --- 2014-11-16 Hans de Goede ijc Superseded
[U-Boot,1/5] sun6i: Make dram clk and zq value Kconfig options - - - - --- 2014-11-16 Hans de Goede ijc Superseded
[U-Boot,v2,4/4] sunxi: Add usb keyboard Kconfig option 1 - - - --- 2014-11-16 Hans de Goede ijc Superseded
« 1 2 ... 6 7 8 … 9 10 »