Show patches with: State = Action Required       |   316 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
eeprom: at24: Add support for 24c1025 EEPROM eeprom: at24: Add support for 24c1025 EEPROM - - - - --- 2021-10-18 Maxim Kochetkov brgl Needs Review / ACK
eeprom: at24: avoid adjusting offset for 24AA025E{48, 64} eeprom: at24: avoid adjusting offset for 24AA025E{48, 64} - - - - --- 2021-04-02 Claudiu Beznea brgl New
[3/3] dt-bindings: i2c: eeprom: document "mac-offset" binding - - - - --- 2017-07-06 Claudiu Beznea brgl New
[2/3] drivers: misc: eeprom: at24: support reading mac eeprom from different addresses - - - - --- 2017-07-06 Claudiu Beznea brgl New
[1/3] dt-bindings: i2c: eeprom: document all at24 bindings - - - - --- 2017-07-06 Claudiu Beznea brgl New
[02/12] eeprom: at24: remove nvmem regmap dependency - - - - --- 2016-04-24 Srinivas Kandagatla brgl New
[v6] at24: Support SMBus read/write of 16-bit devices - - 1 - --- 2015-11-17 Aaron Sierra brgl New
[v4,2/2] i2c-mux-gpmux: Support settle-time-us property i2c-mux-gpmux: Support settle-time-us property - - - - --- 2021-11-03 Horatiu Vultur peda Needs Review / ACK
[v4,1/2] dt-bindings: i2c-mux: Add property for settle time i2c-mux-gpmux: Support settle-time-us property - - - - --- 2021-11-03 Horatiu Vultur peda Needs Review / ACK
[v2,5/5] i2c: mux: pca9541: add support for PCA9641 i2c: mux: pca9541: extend with support for pca9641 - - - - --- 2019-03-06 Peter Rosin peda New
[v2,4/5] dt-bindings: i2c: pca9541: extend with compatible for PCA9641 i2c: mux: pca9541: extend with support for pca9641 - - 1 - --- 2019-03-06 Peter Rosin peda New
[v2,3/5] i2c: mux: pca9541: prepare for PCA9641 support i2c: mux: pca9541: extend with support for pca9641 - - 2 - --- 2019-03-06 Peter Rosin peda New
[v2,2/5] i2c: mux: pca9541: namespace cleanup i2c: mux: pca9541: extend with support for pca9641 - - 2 - --- 2019-03-06 Peter Rosin peda New
[4/4] i2c: mux: pca954x: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - --- 2018-04-17 Peter Rosin peda Needs Review / ACK
[3/4] i2c: mux: pca9541: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - --- 2018-04-17 Peter Rosin peda Needs Review / ACK
[2/4] i2c: mux: mlxcpld: switch to using .probe_new i2c: mux: switch to using .probe_new - - - - --- 2018-04-17 Peter Rosin peda Needs Review / ACK
[v2,RESEND,8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7 i2c: exynos5: Add support for modern Exynos SoCs - - - - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260 i2c: exynos5: Add support for modern Exynos SoCs - - - - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig i2c: exynos5: Add support for modern Exynos SoCs - - 2 - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,5/8] i2c: exynos5: Add bus clock support i2c: exynos5: Add support for modern Exynos SoCs - - 2 - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,3/8] dt-bindings: i2c: exynos5: Add bus clock i2c: exynos5: Add support for modern Exynos SoCs - - - - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-04 Sam Protsenko New
[v2,RESEND,1/8] dt-bindings: i2c: exynos5: Convert to dtschema i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-04 Sam Protsenko New
[v2,8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7 [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - - - --- 2021-12-04 Sam Protsenko New
[v2,7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260 [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - - - --- 2021-12-04 Sam Protsenko New
[v2,6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - 2 - --- 2021-12-04 Sam Protsenko New
[v2,5/8] i2c: exynos5: Add bus clock support [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - 2 - --- 2021-12-04 Sam Protsenko New
[v2,4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - 1 - --- 2021-12-04 Sam Protsenko New
[v2,3/8] dt-bindings: i2c: exynos5: Add bus clock [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - - - --- 2021-12-04 Sam Protsenko New
[v2,2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - 1 - --- 2021-12-04 Sam Protsenko New
[v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema [v2,1/8] dt-bindings: i2c: exynos5: Convert to dtschema - - 1 - --- 2021-12-04 Sam Protsenko New
[v3] i2c: i801: Don't clear status flags twice in interrupt mode [v3] i2c: i801: Don't clear status flags twice in interrupt mode - - - - --- 2021-12-04 Heiner Kallweit New
[v2] eeprom: at24: Add support for 24c1025 EEPROM [v2] eeprom: at24: Add support for 24c1025 EEPROM - - - - --- 2021-12-03 Maxim Kochetkov New
[v2] i2c: i801: Don't clear status flags twice in interrupt mode [v2] i2c: i801: Don't clear status flags twice in interrupt mode - - - - --- 2021-12-03 Heiner Kallweit New
[v1,1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage [v1,1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage - - - - --- 2021-12-03 Andy Shevchenko New
[PULL,REQUEST] i2c for v5.16 [PULL,REQUEST] i2c for v5.16 - - - - --- 2021-12-03 Wolfram Sang New
[RFC,v2,3/3] add npcm7xx debug counters as sysfs attributes I2C statistics as sysfs attributes - - 1 - --- 2021-12-03 Sui Chen New
[RFC,v2,2/3] i2c: npcm7xx: add tx_complete counter I2C statistics as sysfs attributes - - - - --- 2021-12-03 Sui Chen New
[RFC,v2,1/3] i2c debug counters as sysfs attributes I2C statistics as sysfs attributes - - - - --- 2021-12-03 Sui Chen New
[v3] i2c: virtio: fix completion handling [v3] i2c: virtio: fix completion handling 1 1 - - --- 2021-12-02 Vincent Whitchurch New
i2c: i801: Don't clear status flags twice in interrupt mode i2c: i801: Don't clear status flags twice in interrupt mode - - - - --- 2021-12-02 Heiner Kallweit New
i2c: i801: Don't read back cleared status in i801_check_pre() i2c: i801: Don't read back cleared status in i801_check_pre() - - - - --- 2021-12-02 Heiner Kallweit New
[6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig i2c: exynos5: Add support for modern Exynos SoCs - - 2 - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[5/6] i2c: exynos5: Add bus clock support i2c: exynos5: Add support for modern Exynos SoCs - - 2 - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[3/6] dt-bindings: i2c: exynos5: Add bus clock i2c: exynos5: Add support for modern Exynos SoCs - - - - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[1/6] dt-bindings: i2c: exynos5: Convert to dtschema i2c: exynos5: Add support for modern Exynos SoCs - - 1 - --- 2021-12-01 Sam Protsenko Needs Review / ACK
[v2] i2c: cadence: Add standard bus recovery support [v2] i2c: cadence: Add standard bus recovery support 1 - - - --- 2021-11-29 Shubhrajyoti Datta Under Review
[v2] Docs: Fixes link to I2C specification [v2] Docs: Fixes link to I2C specification - - - - --- 2021-11-19 Deep Majumder Under Review
[net-next,v3,6/6] mctp i2c: MCTP I2C binding driver MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[net-next,v3,5/6] dt-bindings: net: New binding mctp-i2c-controller MCTP I2C driver - - 1 - --- 2021-11-15 Matt Johnston New
[net-next,v3,4/6] i2c: npcm7xx: Allow 255 byte block SMBus transfers MCTP I2C driver - - 2 - --- 2021-11-15 Matt Johnston New
[net-next,v3,3/6] i2c: aspeed: Allow 255 byte block transfers MCTP I2C driver - - 1 - --- 2021-11-15 Matt Johnston New
[net-next,v3,2/6] i2c: dev: Handle 255 byte blocks for i2c ioctl MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[net-next,v3,1/6] i2c: core: Allow 255 byte transfers for SMBus 3.x MCTP I2C driver - - - - --- 2021-11-15 Matt Johnston New
[v2,2/2] i2c:imx: Add an extra read at the end of an I2C slave read i2c:imx: Deliver a timely stop on slave side, fix recv - - 2 1 --- 2021-11-12 Corey Minyard Under Review
[v2,2/2] devicetree bindings I2C Add bindings doc for Sunplus SP7021 [v2,1/2] I2C: Add I2C driver for Sunplus SP7021 - - - - --- 2021-11-09 LH.Kuo New
[v2,1/2] I2C: Add I2C driver for Sunplus SP7021 [v2,1/2] I2C: Add I2C driver for Sunplus SP7021 - - - - --- 2021-11-09 LH.Kuo New
[2/2] devicetree bindings I2C Add bindings doc for Sunplus SP7021 This is a patch series for I2C driver for Sunplus SP7021 SoC. - - - - --- 2021-10-29 LH.Kuo New
[1/2] I2C: Add I2C driver for Sunplus SP7021 This is a patch series for I2C driver for Sunplus SP7021 SoC. - - - - --- 2021-10-29 LH.Kuo New
i2c: core: Fix possible memleak in i2c_new_client_device() i2c: core: Fix possible memleak in i2c_new_client_device() - - - - --- 2021-10-15 Yang Yingliang Under Review
[RFC,2/2] add npcm7xx debug counters as sysfs attributes [RFC,1/2] i2c debug counters as sysfs attributes - - 1 - --- 2021-10-12 Sui Chen New
[RFC,1/2] i2c debug counters as sysfs attributes [RFC,1/2] i2c debug counters as sysfs attributes - - - - --- 2021-10-12 Sui Chen New
[v8,5/5] i2c: mediatek: modify bus speed calculation formula Introducing an attribute to select the time setting - - 1 - --- 2021-10-10 Kewei Xu Under Review
[v8,4/5] i2c: mediatek: Isolate speed setting via dts for special devices Introducing an attribute to select the time setting - 1 1 - --- 2021-10-10 Kewei Xu Under Review
[v8,3/5] dt-bindings: i2c: add attribute use-default-timing Introducing an attribute to select the time setting 1 1 1 - --- 2021-10-10 Kewei Xu Under Review
[v2] i2c: rcar: add SMBus block read support [v2] i2c: rcar: add SMBus block read support - - - - --- 2021-10-06 Andrew Gabbasov New
i2c: rcar: add SMBus block read support i2c: rcar: add SMBus block read support - - - - --- 2021-09-22 Andrew Gabbasov New
[net,2/2] net: dsa: realtek: register the MDIO bus under devres Fix mdiobus users with devres 1 1 1 - --- 2021-09-20 Vladimir Oltean New
[net,1/2] net: dsa: don't allocate the slave_mii_bus using devres Fix mdiobus users with devres - 1 2 1 --- 2021-09-20 Vladimir Oltean New
i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA - - 1 - --- 2021-08-26 Tobias Schramm Under Review
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()' i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()' - 1 - - --- 2021-08-20 Christophe JAILLET Needs Review / ACK
[3/3] i2c: at91: add advanced digital filtering support for SAMA5D4 i2c: at91: Fixes and updates - - - - --- 2021-07-27 Codrin Ciubotariu Under Review
[2/3] i2c: at91: keep the controller disabled when it is not used i2c: at91: Fixes and updates - 1 - - --- 2021-07-27 Codrin Ciubotariu Under Review
[1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer() i2c: at91: Fixes and updates - 1 - - --- 2021-07-27 Codrin Ciubotariu Under Review
[v3] i2c: i801: Safely share SMBus with BIOS/ACPI [v3] i2c: i801: Safely share SMBus with BIOS/ACPI - 1 - - --- 2021-06-26 Hector Martin Needs Review / ACK
[v2,2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK - 1 - - --- 2021-06-16 Quan Nguyen Needs Review / ACK
[v2,1/2] i2c: aspeed: Fix unhandled Tx done with NAK i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK - 1 - - --- 2021-06-16 Quan Nguyen Needs Review / ACK
[v3] i2c: bcm-iproc: Add i2c recovery support [v3] i2c: bcm-iproc: Add i2c recovery support 1 - - - --- 2021-06-03 Chris Packham Under Review
[-next] i2c: bcm2835: add missing disable and put clk on error in bcm2835_i2c_probe() [-next] i2c: bcm2835: add missing disable and put clk on error in bcm2835_i2c_probe() - 1 - - --- 2021-06-01 Yang Yingliang Needs Review / ACK
[v2,2/2] i2c: core: Propagate all possible errors when requesting recovery GPIOs [v2,1/2] i2c: core: Make debug message even more debuggish - - - - --- 2021-05-28 Andy Shevchenko New
[2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue Fix the i2c/clk bug of stm32 mcu platform - 1 - - --- 2021-05-14 Dillon Min Needs Review / ACK
i2c: slave-eeprom: add an of_match_table i2c: slave-eeprom: add an of_match_table - - - - --- 2021-05-04 Bjorn Ardo New
[v6,1/5] i2c: i2c-core-of: Fix corner case of finding adapter by node drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems - - 1 - --- 2021-05-03 Doug Anderson New
Fix 'assignment to __be16' warning Fix 'assignment to __be16' warning - - - - --- 2021-04-12 Bence Csókás New
[v1,2/2] i2c: use "dev-name" device tree property to override device name Override device name using DT "dev-name" property - - - - --- 2021-04-07 Manish Varma New
[v1,1/2] dt-bindings: i2c: add "dev-name" property to assign specific device name Override device name using DT "dev-name" property - - - - --- 2021-04-07 Manish Varma New
i2c: s3c2410: Remove unneeded variable "ret" i2c: s3c2410: Remove unneeded variable "ret" - - - - --- 2021-03-25 tiantao (H) New
i2c: imx: Use devm_request_irq() i2c: imx: Use devm_request_irq() - - - - --- 2021-03-19 tiantao (H) New
i2c: mlxbf: Remove the unneeded devm_free_irq i2c: mlxbf: Remove the unneeded devm_free_irq 1 - - - --- 2021-03-19 tiantao (H) New
i2c: qcom-geni: add ACPI device id for sc8180x i2c: qcom-geni: add ACPI device id for sc8180x - - - - --- 2021-03-01 Shawn Guo Needs Review / ACK
[v4,4/4] i2c: aspeed: add DMA mode transfer support i2c: aspeed: Add buffer and DMA modes support - - - - --- 2021-02-24 Jae Hyun Yoo Needs Review / ACK
[v4,3/4] i2c: aspeed: add buffer mode transfer support i2c: aspeed: Add buffer and DMA modes support - - 1 1 --- 2021-02-24 Jae Hyun Yoo Needs Review / ACK
[v4,2/4] ARM: dts: aspeed: modify I2C node to support buffer mode i2c: aspeed: Add buffer and DMA modes support - - 2 - --- 2021-02-24 Jae Hyun Yoo Needs Review / ACK
[v4,1/4] dt-bindings: i2c: aspeed: add transfer mode support i2c: aspeed: Add buffer and DMA modes support - - 1 - --- 2021-02-24 Jae Hyun Yoo Needs Review / ACK
i2c/busses:remove unneeded "ret" variables in the i2c-s3c2410.c i2c/busses:remove unneeded "ret" variables in the i2c-s3c2410.c - - - - --- 2021-02-23 dingsenjie@163.com New
i2c/busses:remove unneeded variable: "ret" i2c/busses:remove unneeded variable: "ret" - - - - --- 2021-02-23 dingsenjie@163.com New
[v3,3/3] dt-bindings: i2c: qcom,i2c-qup: Document noise rejection properties QCOM QUP I2C - Add noise rejection, convert to YAML - - 1 - --- 2021-01-14 AngeloGioacchino Del Regno Needs Review / ACK
« 1 2 3 4 »