Show patches with: State = Action Required       |   328 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: treewide: Update @st.com email address to @foss.st.com - - - - --- 2021-10-20 Patrice CHOTARD New
[v1] i2c: tegra: Ensure that device is suspended before driver is removed [v1] i2c: tegra: Ensure that device is suspended before driver is removed - - - - --- 2021-10-19 Dmitry Osipenko New
i2c: i801: Fix interrupt storm from SMB_ALERT signal i2c: i801: Fix interrupt storm from SMB_ALERT signal - - - - --- 2021-10-19 Jarkko Nikula New
[2/2] i2c: virtio: fix completion handling virtio-i2c: Fix buffer handling - - - - --- 2021-10-19 Vincent Whitchurch New
[1/2] i2c: virtio: disable timeout handling virtio-i2c: Fix buffer handling - - - - --- 2021-10-19 Vincent Whitchurch New
sound: soc: tlv320aic3x: Make aic3x_remove() return void sound: soc: tlv320aic3x: Make aic3x_remove() return void - - - - --- 2021-10-19 Uwe Kleine-König New
[v4] i2c: qcom-geni: Add support for GPI DMA [v4] i2c: qcom-geni: Add support for GPI DMA - - - - --- 2021-10-19 Vinod Koul New
[v2] gpio: Return EPROBE_DEFER if gc->to_irq is NULL [v2] gpio: Return EPROBE_DEFER if gc->to_irq is NULL - - - - --- 2021-10-18 Shreeya Patel New
eeprom: at24: Add support for 24c1025 EEPROM eeprom: at24: Add support for 24c1025 EEPROM - - - - --- 2021-10-18 Maxim Kochetkov New
[6/6] at24: Support probing while in non-zero ACPI D state Support running driver's probe for a device powered off 1 - 1 - --- 2021-10-18 Sakari Ailus New
[5/6] media: i2c: imx319: Support device probe in non-zero ACPI D state Support running driver's probe for a device powered off - - 2 - --- 2021-10-18 Sakari Ailus New
[4/6] ACPI: Add a convenience function to tell a device is in D0 state Support running driver's probe for a device powered off - - 2 - --- 2021-10-18 Sakari Ailus New
[3/6] Documentation: ACPI: Document _DSC object usage for enum power state Support running driver's probe for a device powered off - - 1 - --- 2021-10-18 Sakari Ailus New
[2/6] i2c: Allow an ACPI driver to manage the device's power state during probe Support running driver's probe for a device powered off 1 - 1 - --- 2021-10-18 Sakari Ailus New
[1/6] ACPI: scan: Obtain device's desired enumeration power state Support running driver's probe for a device powered off - - - - --- 2021-10-18 Sakari Ailus New
i2c: thunderx: Fix some resource leak i2c: thunderx: Fix some resource leak - 1 - - --- 2021-10-16 Christophe JAILLET New
[2/2] i2c: i2c-mux-gpio: Add support 'select-delay' property i2c-mux-gpio: Add optional 'select-delay' DT property - - - - --- 2021-10-13 Horatiu Vultur New
[1/2] dt-bindings: i2c-mux-gpio: Add optional DT property i2c-mux-gpio: Add optional 'select-delay' DT property - - - - --- 2021-10-13 Horatiu Vultur New
[2/2] i2c: at91: add support for brsrcclk i2c: at91: Add support for programmable clock source - - - - --- 2021-10-12 Horatiu Vultur New
[1/2] dt-bindings: i2c: at91: Extend compatible list for lan966x i2c: at91: Add support for programmable clock source - - - - --- 2021-10-12 Horatiu Vultur New
[RFC,2/2] add npcm7xx debug counters as sysfs attributes [RFC,1/2] i2c debug counters as sysfs attributes - - 1 - --- 2021-10-12 Sui Chen New
[RFC,1/2] i2c debug counters as sysfs attributes [RFC,1/2] i2c debug counters as sysfs attributes - - - - --- 2021-10-12 Sui Chen New
[v2] i2c: rcar: add SMBus block read support [v2] i2c: rcar: add SMBus block read support - - - - --- 2021-10-06 Andrew Gabbasov New
i2c: rk3x: enable clock before getting rate i2c: rk3x: enable clock before getting rate - - - - --- 2021-10-04 John Keeping New
[v1,2/2] i2c:busses:Read and Write routines for PCI1XXXX I2C module i2c:busses:Microchip PCI1XXXX I2C adapter - - - - --- 2021-09-29 LakshmiPraveen Kopparthi New
[v1,1/2] i2c:busses:Register PCI1XXXX adapter to I2C subsystem i2c:busses:Microchip PCI1XXXX I2C adapter - - - - --- 2021-09-29 LakshmiPraveen Kopparthi New
[RESEND] i2c: rk3x: Handle a spurious start completion interrupt flag [RESEND] i2c: rk3x: Handle a spurious start completion interrupt flag - - - - --- 2021-09-24 Ondrej Jirman New
i2c: rcar: add SMBus block read support i2c: rcar: add SMBus block read support - - - - --- 2021-09-22 Andrew Gabbasov New
[net,2/2] net: dsa: realtek: register the MDIO bus under devres Fix mdiobus users with devres 1 1 1 - --- 2021-09-20 Vladimir Oltean New
[net,1/2] net: dsa: don't allocate the slave_mii_bus using devres Fix mdiobus users with devres - 1 2 1 --- 2021-09-20 Vladimir Oltean New
[4/4] i2c: stm32f7: use proper DMAENGINE API for termination i2c: stm32: various fixes & dmaengine updates - - 1 - --- 2021-09-20 Alain Volmat New
[3/4] i2c: stm32f7: stop dma transfer in case of NACK i2c: stm32: various fixes & dmaengine updates - 1 1 - --- 2021-09-20 Alain Volmat New
[2/4] i2c: stm32f7: recover the bus on access timeout i2c: stm32: various fixes & dmaengine updates - 1 1 - --- 2021-09-20 Alain Volmat New
[1/4] i2c: stm32f7: flush TX FIFO upon transfer errors i2c: stm32: various fixes & dmaengine updates - 1 1 - --- 2021-09-20 Alain Volmat New
i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA - - - - --- 2021-08-26 Tobias Schramm New
i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()' i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()' - 1 - - --- 2021-08-20 Christophe JAILLET New
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()' i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()' - 1 - - --- 2021-08-19 Christophe JAILLET New
[v2,9/9] i2c: i801: Improve handling platform data for tco device i2c: i801: Series with improvements - - 1 - --- 2021-08-06 Heiner Kallweit New
[3/3] i2c: at91: add advanced digital filtering support for SAMA5D4 i2c: at91: Fixes and updates - - - - --- 2021-07-27 Codrin Ciubotariu New
[2/3] i2c: at91: keep the controller disabled when it is not used i2c: at91: Fixes and updates - 1 - - --- 2021-07-27 Codrin Ciubotariu New
[1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer() i2c: at91: Fixes and updates - 1 - - --- 2021-07-27 Codrin Ciubotariu New
i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses - - - - --- 2021-07-15 Terry Bowman New
[v5,3/3] bindings: ipmi: Add binding for SSIF BMC driver Add SSIF BMC driver - - 1 - --- 2021-07-14 Quan Nguyen New
[v5,2/3] ipmi: ssif_bmc: Add SSIF BMC driver Add SSIF BMC driver - - - - --- 2021-07-14 Quan Nguyen New
[v5,1/3] i2c: aspeed: Add slave_enable() to toggle slave mode Add SSIF BMC driver - - - - --- 2021-07-14 Quan Nguyen New
[3/3] i2c: stm32f7: prevent calling slave handling if no slave running i2c: stm32f7: several fixes in error cases - 1 - - --- 2021-06-30 Alain Volmat New
[2/3] i2c: stm32f7: flush TX FIFO upon transfer errors i2c: stm32f7: several fixes in error cases - 1 - - --- 2021-06-30 Alain Volmat New
[1/3] i2c: stm32f7: recover the bus on access timeout i2c: stm32f7: several fixes in error cases - 1 - - --- 2021-06-30 Alain Volmat New
[3/3] i2c:support new register set for ast2600 *** Support ASPEED AST2600 I2C *** - - - - --- 2021-06-17 Jamin Lin New
[2/3] dt-bindings: i2c-new: Add bindings for AST2600 I2C *** Support ASPEED AST2600 I2C *** - - - - --- 2021-06-17 Jamin Lin New
[1/3] dts: aspeed: Add node for AST2600 I2C and I2CS *** Support ASPEED AST2600 I2C *** - - - - --- 2021-06-17 Jamin Lin New
[v3] i2c: bcm-iproc: Add i2c recovery support [v3] i2c: bcm-iproc: Add i2c recovery support 1 - - - --- 2021-06-03 Chris Packham New
[v2,2/2] i2c: core: Propagate all possible errors when requesting recovery GPIOs [v2,1/2] i2c: core: Make debug message even more debuggish - - - - --- 2021-05-28 Andy Shevchenko New
[1/3] i2c: aspeed: avoid new registers definition of AST2600 i2c: aspeed: avoid new registers definition of AST2600 - - - - --- 2021-05-19 Jamin Lin New
i2c: slave-eeprom: add an of_match_table i2c: slave-eeprom: add an of_match_table - - - - --- 2021-05-04 Bjorn Ardo New
[v6,1/5] i2c: i2c-core-of: Fix corner case of finding adapter by node drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems - - 1 - --- 2021-05-03 Doug Anderson New
i2c: cadence: Add standard bus recovery support i2c: cadence: Add standard bus recovery support 1 - - - --- 2021-04-15 Robert Hancock New
Fix 'assignment to __be16' warning Fix 'assignment to __be16' warning - - - - --- 2021-04-12 Bence Csókás New
[v1,2/2] i2c: use "dev-name" device tree property to override device name Override device name using DT "dev-name" property - - - - --- 2021-04-07 Manish Varma New
[v1,1/2] dt-bindings: i2c: add "dev-name" property to assign specific device name Override device name using DT "dev-name" property - - - - --- 2021-04-07 Manish Varma New
eeprom: at24: avoid adjusting offset for 24AA025E{48, 64} eeprom: at24: avoid adjusting offset for 24AA025E{48, 64} - - - - --- 2021-04-02 Claudiu Beznea brgl New
i2c: designware: Add base addr info i2c: designware: Add base addr info - - - - --- 2021-03-25 Daniel Gomez New
i2c: s3c2410: Remove unneeded variable "ret" i2c: s3c2410: Remove unneeded variable "ret" - - - - --- 2021-03-25 tiantao (H) New
i2c: imx: Use devm_request_irq() i2c: imx: Use devm_request_irq() - - - - --- 2021-03-19 tiantao (H) New
i2c: mlxbf: Remove the unneeded devm_free_irq i2c: mlxbf: Remove the unneeded devm_free_irq 1 - - - --- 2021-03-19 tiantao (H) New
i2c: qup: move to use request_irq by IRQF_NO_AUTOEN flag i2c: qup: move to use request_irq by IRQF_NO_AUTOEN flag - - - - --- 2021-03-19 tiantao (H) New
i2c/busses:remove unneeded "ret" variables in the i2c-s3c2410.c i2c/busses:remove unneeded "ret" variables in the i2c-s3c2410.c - - - - --- 2021-02-23 dingsenjie@163.com New
i2c/busses:remove unneeded variable: "ret" i2c/busses:remove unneeded variable: "ret" - - - - --- 2021-02-23 dingsenjie@163.com New
[5/5] i2c: stm32: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP - - - - --- 2020-10-29 Coiby Xu New
[4/5] i2c: nomadik: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP 1 - - - --- 2020-10-29 Coiby Xu New
[3/5] i2c: brcmstb: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP - - - - --- 2020-10-29 Coiby Xu New
[2/5] i2c: mediatek: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP - - - - --- 2020-10-29 Coiby Xu New
[1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP - - - - --- 2020-10-29 Coiby Xu New
[v1] i2c: aspeed: add KUnit tests for clock parameters [v1] i2c: aspeed: add KUnit tests for clock parameters - - - - --- 2020-10-16 Brendan Higgins New
[v2] i2c: npcm7xx: Support changing bus speed using debugfs. [v2] i2c: npcm7xx: Support changing bus speed using debugfs. - 1 2 1 --- 2020-10-13 Tali Perry New
[v1] i2c: npcm7xx: Support changing bus speed using debugfs. [v1] i2c: npcm7xx: Support changing bus speed using debugfs. - 1 - - --- 2020-09-30 Tali Perry New
[v2,4/4] HID: i2c-hid: Use block reads when possible to save power i2c-hid: Save power by reducing i2c xfers with block reads 1 - - - --- 2020-09-17 Sultan Alsawaf New
[v2,3/4] i2c: designware: Allow SMBus block reads up to 255 bytes in length i2c-hid: Save power by reducing i2c xfers with block reads - - - - --- 2020-09-17 Sultan Alsawaf New
[v2,2/4] i2c: designware: Ensure tx_buf_len is nonzero for SMBus block reads i2c-hid: Save power by reducing i2c xfers with block reads - 1 - - --- 2020-09-17 Sultan Alsawaf New
[v2,1/4] i2c: designware: Fix transfer failures for invalid SMBus block reads i2c-hid: Save power by reducing i2c xfers with block reads - 1 - - --- 2020-09-17 Sultan Alsawaf New
[v3] i2c: Squash of SMBus block read patchset to save power [v3] i2c: Squash of SMBus block read patchset to save power - 2 - - --- 2020-09-14 Sultan Alsawaf New
dt-bindings: i2c: i2c-mt65xx: Update binding example dt-bindings: i2c: i2c-mt65xx: Update binding example - - - - --- 2020-09-04 Boris Lysov New
i2c: do not acpi/of match device in i2c_device_probe() i2c: do not acpi/of match device in i2c_device_probe() - - 1 - --- 2020-08-26 Sergey Senozhatsky New
[2/2] i2c: do not export i2c_of_match_device() symbol [1/2] i2c: consider devices with of_match_table during i2c device probing - - - - --- 2020-08-26 Sergey Senozhatsky New
[1/2] i2c: consider devices with of_match_table during i2c device probing [1/2] i2c: consider devices with of_match_table during i2c device probing - - 1 - --- 2020-08-26 Sergey Senozhatsky New
drivers/i2c: Removes 'blacklist' from file drivers/i2c: Removes 'blacklist' from file - - - - --- 2020-07-16 Paul Schulz New
[v2] HID: i2c-hid: Use block reads when possible to save power [v2] HID: i2c-hid: Use block reads when possible to save power - - - - --- 2020-06-16 Sultan Alsawaf New
[v2] i2c: designware: Only check the first byte for SMBus block read length [v2] i2c: designware: Only check the first byte for SMBus block read length 1 1 - - --- 2020-06-16 Sultan Alsawaf New
i2c: busses: Fix reference count leaks. i2c: busses: Fix reference count leaks. - - 1 - --- 2020-06-13 wu000273@umn.edu New
i2c: busses: Fix a reference count leak. i2c: busses: Fix a reference count leak. - 1 - - --- 2020-06-13 wu000273@umn.edu New
[v4] i2c: Add i2c-pseudo driver for userspace I2C adapters. [v4] i2c: Add i2c-pseudo driver for userspace I2C adapters. - - 1 - --- 2020-05-21 Matthew Blecker New
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void i2c: s3c2410: make i2c_s3c_irq_nextbyte() void - - - - --- 2020-04-28 Jason Yan New
i2c: i2c-core-base: tiny indention cleanup i2c: i2c-core-base: tiny indention cleanup - - - - --- 2019-11-21 Enrico Weigelt, metux IT consult New
drivers: i2c: introduce devm_i2c_add_adapter() drivers: i2c: introduce devm_i2c_add_adapter() - - - - --- 2019-11-21 Enrico Weigelt, metux IT consult New
[v2,3/3] i2c: qup: Use devm_platform_ioremap_resource helper [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[v2,2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[v2,1/3] i2c: qup: remove explicit conversion to boolean [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[2/2] i2c: core: remove #ifdef for CONFIG_X86 [1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT - - - - --- 2019-09-17 Ben Dooks New
[1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT [1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT - - - - --- 2019-09-17 Ben Dooks New
[v6,18/57] i2c: Remove dev_err() usage after platform_get_irq() Untitled series #122307 - - - - --- 2019-07-30 Stephen Boyd New
« 1 2 3 4 »