Show patches with: State = Action Required       |   345 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[RFC,v2] i2c: Support Smbus 3.0 block sizes up to 255 bytes. [RFC,v2] i2c: Support Smbus 3.0 block sizes up to 255 bytes. - - - - --- 2020-07-29 Daniel Stodden wsa Under Review
[v2,2/2] i2c: iproc: add slave pec support add PEC support on slave side - - - - --- 2020-07-17 Rayagonda Kokatanur wsa Under Review
[v2,1/2] i2c: add PEC error event add PEC support on slave side - - - - --- 2020-07-17 Rayagonda Kokatanur wsa Under Review
drivers/i2c: Removes 'blacklist' from file drivers/i2c: Removes 'blacklist' from file - - - - --- 2020-07-16 Paul Schulz New
[v2] HID: i2c-hid: Use block reads when possible to save power [v2] HID: i2c-hid: Use block reads when possible to save power - - - - --- 2020-06-16 Sultan Alsawaf New
[v2] i2c: designware: Only check the first byte for SMBus block read length [v2] i2c: designware: Only check the first byte for SMBus block read length 1 1 - - --- 2020-06-16 Sultan Alsawaf New
i2c: busses: Fix reference count leaks. i2c: busses: Fix reference count leaks. - - 1 - --- 2020-06-13 wu000273@umn.edu New
i2c: busses: Fix a reference count leak. i2c: busses: Fix a reference count leak. - 1 - - --- 2020-06-13 wu000273@umn.edu New
[v4] i2c: Add i2c-pseudo driver for userspace I2C adapters. [v4] i2c: Add i2c-pseudo driver for userspace I2C adapters. - - 1 - --- 2020-05-21 Matthew Blecker New
[v3] i2c: at91: support atomic write xfer [v3] i2c: at91: support atomic write xfer - - - - --- 2020-03-22 Michał Mirosław wsa Under Review
[1/1] i2c: imc: Add support for Intel iMC SMBus host controller. i2c: imc: Add support for Intel iMC SMBus host controller. - - - - --- 2020-02-23 Stefan Schaeckeler Needs Review / ACK
i2c: thunderx: Add missed pci_release_regions i2c: thunderx: Add missed pci_release_regions - - - - --- 2019-12-06 Chuhong Yuan Needs Review / ACK
i2c: avoid ifdeffery in I2C drivers with optional slave support i2c: avoid ifdeffery in I2C drivers with optional slave support - - - - --- 2019-12-04 Sascha Hauer wsa Under Review
i2c: i2c-core-base: tiny indention cleanup i2c: i2c-core-base: tiny indention cleanup - - - - --- 2019-11-21 Enrico Weigelt, metux IT consult New
drivers: i2c: introduce devm_i2c_add_adapter() drivers: i2c: introduce devm_i2c_add_adapter() - - - - --- 2019-11-21 Enrico Weigelt, metux IT consult New
i2c: ismt: Add missed pci_release_region i2c: ismt: Add missed pci_release_region - - - - --- 2019-11-09 Chuhong Yuan Needs Review / ACK
[v2] i2c: imx-lpi2c: add clk_disable_unprepare calls [v2] i2c: imx-lpi2c: add clk_disable_unprepare calls - - - - --- 2019-11-02 Chuhong Yuan Needs Review / ACK
[i2c-next,2/2] i2c: aspeed: add slave inactive timeout support i2c: aspeed: Add H/W timeout support - - 1 - --- 2019-10-21 Jae Hyun Yoo Needs Review / ACK
[i2c-next,1/2] dt-bindings: i2c: aspeed: add hardware timeout support i2c: aspeed: Add H/W timeout support - - - - --- 2019-10-21 Jae Hyun Yoo Needs Review / ACK
[RFCv3] i2c: hold the core_lock for the whole execution of i2c_register_adapter() [RFCv3] i2c: hold the core_lock for the whole execution of i2c_register_adapter() - - - - --- 2019-10-08 Slawomir Stepien wsa Under Review
[v2,3/3] i2c: qup: Use devm_platform_ioremap_resource helper [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[v2,2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[v2,1/3] i2c: qup: remove explicit conversion to boolean [v2,1/3] i2c: qup: remove explicit conversion to boolean - - - - --- 2019-09-17 Saiyam Doshi New
[2/2] i2c: core: remove #ifdef for CONFIG_X86 [1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT - - - - --- 2019-09-17 Ben Dooks New
[1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT [1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT - - - - --- 2019-09-17 Ben Dooks New
i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt - - - - --- 2019-08-12 Xu, Lingyan (NSB - CN/Hangzhou) Needs Review / ACK
[v2] i2c: avoid sleep in IRQ context [v2] i2c: avoid sleep in IRQ context - - - - --- 2019-08-07 Fuqian Huang Needs Review / ACK
i2c: imx: Initialize DMA before registering I2C adapter i2c: imx: Initialize DMA before registering I2C adapter - - - - --- 2019-06-09 Andrey Smirnov New
[PATCHv7,3/3] Documentation: ABI: Add i2c-slave-mqueue sysfs documentation [PATCHv7,1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue - - - - --- 2019-06-05 Eduardo Valentin wsa Under Review
[PATCHv7,2/3] i2c: slave-mqueue: add a slave backend to receive and queue messages [PATCHv7,1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue - - 1 - --- 2019-06-05 Eduardo Valentin wsa Under Review
[PATCHv7,1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue [PATCHv7,1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue - - - - --- 2019-06-05 Eduardo Valentin wsa Under Review
i2c: tegra: use busendiannes variable i2c: tegra: use busendiannes variable - - - - --- 2019-05-09 Nicholas Mc Guire New
[v2,5/5] i2c: mux: pca9541: add support for PCA9641 i2c: mux: pca9541: extend with support for pca9641 - - - - --- 2019-03-06 Peter Rosin peda New
[v2,4/5] dt-bindings: i2c: pca9541: extend with compatible for PCA9641 i2c: mux: pca9541: extend with support for pca9641 - - 1 - --- 2019-03-06 Peter Rosin peda New
[v2,3/5] i2c: mux: pca9541: prepare for PCA9641 support i2c: mux: pca9541: extend with support for pca9641 - - 2 - --- 2019-03-06 Peter Rosin peda New
[v2,2/5] i2c: mux: pca9541: namespace cleanup i2c: mux: pca9541: extend with support for pca9641 - - 2 - --- 2019-03-06 Peter Rosin peda New
i2c: document the SDA hold time binding i2c: document the SDA hold time binding - 1 - - --- 2019-02-11 Wolfram Sang New
ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call(). ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call(). - 2 - - --- 2018-12-17 Krzysztof Hałasa New
[v2,2/2] i2c: at91: Save the bus clock frequency in adapter i2c: enable buses to save their clock frequency in adapter 1 - - - --- 2018-12-10 Tudor Ambarus wsa Under Review
[v2,1/2] i2c: enable buses to save their clock frequency in adapter i2c: enable buses to save their clock frequency in adapter - - 1 - --- 2018-12-10 Tudor Ambarus wsa Under Review
[1/1] i2c: Fix value of the delay-us property in i2c-gpio dt binding docs [1/1] i2c: Fix value of the delay-us property in i2c-gpio dt binding docs - - - - --- 2018-12-09 Sebastian Panceac wsa Under Review
[RESEND] i2c: at91: switched to resume/suspend callbacks. [RESEND] i2c: at91: switched to resume/suspend callbacks. - - - - --- 2018-12-07 Andrei.Stefanescu@microchip.com New
[RFC] i2c: hold the core_lock for the whole execution of i2c_register_adapter() [RFC] i2c: hold the core_lock for the whole execution of i2c_register_adapter() - - - - --- 2018-12-04 Stepien, Slawomir (Nokia - PL/Wroclaw) New
ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call(). ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call(). - - - - --- 2018-12-03 Krzysztof Hałasa New
[v3] i2c: imx: check bus for busy before signaling start condition. [v3] i2c: imx: check bus for busy before signaling start condition. - - - - --- 2018-11-16 Steven Weaver New
[v2] i2c: imx: add workaround for erratum ERR010027 [v2] i2c: imx: add workaround for erratum ERR010027 - - - - --- 2018-11-03 Zhang Ying-22455 New
i2c: aspeed: Fix an incorrect error log printing i2c: aspeed: Fix an incorrect error log printing - - - - --- 2018-11-01 Jae Hyun Yoo Needs Review / ACK
i2c: at91: switched to resume/suspend callbacks. i2c: at91: switched to resume/suspend callbacks. 1 - - - --- 2018-10-22 Andrei.Stefanescu@microchip.com New
[v3,2/2] treewide: use bus_find_device_by_fwnode [v3,1/2] Driver core: add bus_find_device_by_fwnode - - 2 1 --- 2018-10-09 Silesh C V New
[v3,1/2] Driver core: add bus_find_device_by_fwnode [v3,1/2] Driver core: add bus_find_device_by_fwnode - - 1 - --- 2018-10-09 Silesh C V New
[v3,3/3] i2c: designware: select gpio/default pin when prepare/unprepare recovery i2c: designware: select gpio/default pin when prepare/unprepare recovery 1 - - - --- 2018-09-17 Jisheng Zhang New
[v3,2/3] dt-bindings: i2c: designware: add optional pinctrl for bus recovery i2c: designware: select gpio/default pin when prepare/unprepare recovery - - - - --- 2018-09-17 Jisheng Zhang New
[v3,1/3] dt-bindings: i2c: designware: add optional gpio recovery properties i2c: designware: select gpio/default pin when prepare/unprepare recovery - - - - --- 2018-09-17 Jisheng Zhang New
i2c: mv64xxx: better error description for stuck slaves i2c: mv64xxx: better error description for stuck slaves - - - - --- 2018-08-23 Jan Kundrát Needs Review / ACK
[PATCH/RFT,6/6] i2c: recovery: remove bogus check if SDA GPIO is set to output i2c: recovery: fix GPIO usage for recovery - - 1 - --- 2018-07-13 Wolfram Sang New
[PATCH/RFT,5/6] i2c: imx: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - --- 2018-07-13 Wolfram Sang New
[PATCH/RFT,4/6] i2c: davinci: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - --- 2018-07-13 Wolfram Sang New
[PATCH/RFT,3/6] i2c: designware: set SDA as output for recovery i2c: recovery: fix GPIO usage for recovery - - - - --- 2018-07-13 Wolfram Sang New
[PATCH/RFT,1/6] i2c: designware: use open drain for recovery GPIO i2c: recovery: fix GPIO usage for recovery - - - - --- 2018-07-13 Wolfram Sang New
PATCH i2c: smbus_read_block write out of buffer on noisy bus PATCH i2c: smbus_read_block write out of buffer on noisy bus - - - - --- 2018-06-21 Pasha New
[v2,1/2] i2c: core-smbus: fix a potential uninitialization bug [v2,1/2] i2c: core-smbus: fix a potential uninitialization bug - - - - --- 2018-05-05 Wenwen Wang wsa Under Review
Documentation: i2c: drop unnecessary .owner field in examples Documentation: i2c: drop unnecessary .owner field in examples - - - - --- 2018-01-15 Nicholas Mc Guire New
[v7,4/4] iio : cm32181 : cosmetic cleanup [v7,1/4] i2c-smbus : Add client discovered ARA support 1 - - - --- 2018-01-13 CAPDEVILLE Marc New
[v7,3/4] iio : Add cm3218 smbus ARA and ACPI support [v7,1/4] i2c-smbus : Add client discovered ARA support - - - - --- 2018-01-13 CAPDEVILLE Marc New
[v7,2/4] i2c-acpi : exclude ARA address for smbus device [v7,1/4] i2c-smbus : Add client discovered ARA support - - - - --- 2018-01-13 CAPDEVILLE Marc New
[v7,1/4] i2c-smbus : Add client discovered ARA support [v7,1/4] i2c-smbus : Add client discovered ARA support - - - - --- 2018-01-13 CAPDEVILLE Marc New
[RFC,v2,3/3] i2c: core: move smbus_alert module into i2c-core i2c: core: move smbus_alert into i2c-core - - - - --- 2017-11-28 Phil Reid New
[RFC,v2,2/3] i2c: Kconfig: rename variable I2C_SMBUS to I2C_SMBUS_ALERT i2c: core: move smbus_alert into i2c-core - - - - --- 2017-11-28 Phil Reid New
[RFC,v2,1/3] i2c: smbus: move of_i2c_setup_smbus_alert declaration to i2c-core.h i2c: core: move smbus_alert into i2c-core - - - - --- 2017-11-28 Phil Reid New
[Bug,fix] octeon-i2c driver updates [Bug,fix] octeon-i2c driver updates - - - - --- 2017-11-23 Zhang, Sean C. (NSB - CN/Hangzhou) New
[3/3] i2c: imx: use runtime PM provided by core imx i2c vs clk framework deadlock fix - - - - --- 2017-11-17 Lucas Stach New
[2/3] i2c: add runtime PM handling to core imx i2c vs clk framework deadlock fix - - - - --- 2017-11-17 Lucas Stach New
I2C-Octeon: Use common error handling code in octeon_i2c_probe() I2C-Octeon: Use common error handling code in octeon_i2c_probe() - - - - --- 2017-10-25 SF Markus Elfring New
i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller - - - - --- 2017-10-11 Radoslaw Pietrzyk wsa Under Review
[v2,2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c" Fix I2C repeated start timing violation on Armada-38x. - - - - --- 2017-09-28 Kalyan Kinthada Needs Review / ACK
[2/3] drivers: misc: eeprom: at24: support reading mac eeprom from different addresses - - - - --- 2017-07-06 Claudiu Beznea brgl New
[1/3] dt-bindings: i2c: eeprom: document all at24 bindings - - - - --- 2017-07-06 Claudiu Beznea brgl New
i2c: i801: Allow ACPI SystemIO OpRegion to conflict harder - - - - --- 2017-06-26 Lyude Paul Needs Review / ACK
i2c: make sure i2c_master_send/recv return negative error codes - - - - --- 2017-04-01 Dmitry Torokhov New
[09/39] Annotate hardware config module parameters in drivers/i2c/ - - - - --- 2016-12-01 David Howells New
[resend,v4] i2c: hibvt: add Hisilicon BVT I2C controller driver 1 - - - --- 2016-10-21 Pan Wen New
[4/4] i2c-dev: Adjust checks for null pointers in three functions - - - - --- 2016-09-23 SF Markus Elfring New
[3/4] i2c-dev: Rename jump labels in i2cdev_attach_adapter() - - - - --- 2016-09-23 SF Markus Elfring New
[2/4] i2c-dev: Improve another size determination in i2cdev_ioctl_rdwr() - - - - --- 2016-09-23 SF Markus Elfring New
[1/4] i2c-dev: Use kmalloc_array() in i2cdev_ioctl_rdwr() - - - - --- 2016-09-23 SF Markus Elfring New
[v2,1/2] i2c: octeon: thunderx: Check bus state before starting a transaction - - - - --- 2016-09-23 Jan Glauber New
[3/3] i2c: expose adapter probe and remove probed functions - - - - --- 2016-09-05 David Lechner New
[2/3] i2c: Add special case for detecting LEGO devices - - - - --- 2016-09-05 David Lechner New
[1/3] i2c: Add class for LEGO MINDSTORMS sensors - - - - --- 2016-09-05 David Lechner New
i2c-eg20t: use dynamically registered adapter number - - - - --- 2016-08-23 Yadi Hu wsa Under Review
[v4,2/2] i2c: ti-smusbdig: add TI SM-USB-DIG I2C bus driver - - - - --- 2016-08-09 Andrew Davis Needs Review / ACK
[v4,1/2] mfd: ti-smusbdig: Add support for the TI SM-USB-DIG - - - - --- 2016-08-09 Andrew Davis Needs Review / ACK
[10/10] i2c: designware-platdrv: Rework system PM support - - - - --- 2016-06-14 Ulf Hansson New
[09/10] i2c: designware-platdrv: Simplify code by using dev_get_drvdata() 1 - - - --- 2016-06-14 Ulf Hansson New
[08/10] i2c: designware-platdrv: Check return value from clk_prepare_enable() - - - - --- 2016-06-14 Ulf Hansson New
[07/10] i2c: designware-platdrv: Re-init the HW when resuming - - - - --- 2016-06-14 Ulf Hansson New
[06/10] i2c: designware-platdrv: Update runtime PM last busy mark in ->probe() - - - - --- 2016-06-14 Ulf Hansson New
[05/10] i2c: designware-platdrv: Fix clk gating in ->remove() - - - - --- 2016-06-14 Ulf Hansson New
[04/10] i2c: designware-platdrv: Disable autosuspend in error path in ->probe() - - - - --- 2016-06-14 Ulf Hansson New
[03/10] i2c: designware-platdrv: Unconditionally enable runtime PM - - - - --- 2016-06-14 Ulf Hansson New
« 1 2 3 4 »