Message ID | 199314946c37108f8c7f3762eea2704f87729171.1412266972.git.marcel@ziswiler.com |
---|---|
State | Accepted |
Delegated to: | Tom Warren |
Headers | show |
On Thu, 2014-10-02 at 18:23 +0200, Marcel Ziswiler wrote: Sorry about the 42/42 thingy but my tree is still holding Thierry's (now on CC) latest PCIe patch set (BTW: what's the status there?) and I forgot to fix that up prior to sending it out.
On 10/03/2014 01:03 AM, Marcel Ziswiler wrote: > On Thu, 2014-10-02 at 18:23 +0200, Marcel Ziswiler wrote: > > Sorry about the 42/42 thingy but my tree is still holding Thierry's (now > on CC) latest PCIe patch set (BTW: what's the status there?) and I > forgot to fix that up prior to sending it out. If you want to extract just 1 (or some specific number) of commits rather than "everything since upstream", you can always run: git format-patch -1 commit_id where -1 means "1 commit" (and could be any number) and commit_id is the most recent commit you want to send. That way, format-patch will generate the correct N/M values in the email subjects without you having to fix them up:-)
On Fri, 2014-10-03 at 09:40 -0600, Stephen Warren wrote: > If you want to extract just 1 (or some specific number) of commits > rather than "everything since upstream", you can always run: > > git format-patch -1 commit_id > > where -1 means "1 commit" (and could be any number) and commit_id is the > most recent commit you want to send. That way, format-patch will > generate the correct N/M values in the email subjects without you having > to fix them up:-) Thanks mate, I knew there's gotta be a better way to doing this, just never got around to actually fiddle with it. Do you happen to know about the status of Thierry's latest PCIe patch set?
On 10/03/2014 09:55 AM, Marcel Ziswiler wrote: > On Fri, 2014-10-03 at 09:40 -0600, Stephen Warren wrote: >> If you want to extract just 1 (or some specific number) of commits >> rather than "everything since upstream", you can always run: >> >> git format-patch -1 commit_id >> >> where -1 means "1 commit" (and could be any number) and commit_id is the >> most recent commit you want to send. That way, format-patch will >> generate the correct N/M values in the email subjects without you having >> to fix them up:-) > > Thanks mate, I knew there's gotta be a better way to doing this, just > never got around to actually fiddle with it. > > Do you happen to know about the status of Thierry's latest PCIe patch > set? I think Tom was going to track down who was going to apply it.
Sorry, Tom. Found another one that hasn't quite made it in yet (;-p). On Thu, 2014-10-02 at 18:23 +0200, Marcel Ziswiler wrote: > Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> > --- > arch/arm/dts/tegra30-colibri.dts | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts > index 43d03ca..8ede0c0 100644 > --- a/arch/arm/dts/tegra30-colibri.dts > +++ b/arch/arm/dts/tegra30-colibri.dts > @@ -22,8 +22,10 @@ > reg = <0x80000000 0x40000000>; > }; > > - /* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier > - board) */ > + /* > + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier > + * board) > + */ > i2c@7000c000 { > status = "okay"; > clock-frequency = <100000>; > @@ -39,8 +41,10 @@ > clock-frequency = <100000>; > }; > > - /* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > - touch screen controller */ > + /* > + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > + * touch screen controller > + */ > i2c@7000d000 { > status = "okay"; > clock-frequency = <100000>;
diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 43d03ca..8ede0c0 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -22,8 +22,10 @@ reg = <0x80000000 0x40000000>; }; - /* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier - board) */ + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -39,8 +41,10 @@ clock-frequency = <100000>; }; - /* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and - touch screen controller */ + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ i2c@7000d000 { status = "okay"; clock-frequency = <100000>;
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> --- arch/arm/dts/tegra30-colibri.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)