diff mbox series

[v2,08/17] thermal: Add support for TI LM74

Message ID e2240984726e028aed5d9c75c16f4b6b45eb1aeb.1713160866.git.christophe.leroy@csgroup.eu
State Accepted
Commit c578728d2e33754e38af869f6cdf992d18d058da
Delegated to: Tom Rini
Headers show
Series Misc changes for CSSI boards | expand

Commit Message

Christophe Leroy April 15, 2024, 6:07 a.m. UTC 
LM74 is a SPI temperature sensor.

Implement a driver to read temperature from it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 drivers/thermal/Kconfig   |  6 +++++
 drivers/thermal/Makefile  |  1 +
 drivers/thermal/ti-lm74.c | 52 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 59 insertions(+)
 create mode 100644 drivers/thermal/ti-lm74.c
diff mbox series

Patch

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 681b621760..440eb64a56 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -41,4 +41,10 @@  config TI_DRA7_THERMAL
 	 Enable thermal support for for the Texas Instruments DRA752 SoC family.
 	 The driver supports reading CPU temperature.
 
+config TI_LM74_THERMAL
+        bool "Temperature sensor driver for TI LM74 chip"
+        help
+	 Enable thermal support for the Texas Instruments LM74 chip.
+	 The driver supports reading CPU temperature.
+
 endif # if DM_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 8acc7d20cb..b5ab0fc221 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -9,3 +9,4 @@  obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
 obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
 obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
 obj-$(CONFIG_IMX_TMU) += imx_tmu.o
+obj-$(CONFIG_TI_LM74_THERMAL) += ti-lm74.o
diff --git a/drivers/thermal/ti-lm74.c b/drivers/thermal/ti-lm74.c
new file mode 100644
index 0000000000..7d56f75df0
--- /dev/null
+++ b/drivers/thermal/ti-lm74.c
@@ -0,0 +1,52 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI LM74 temperature sensor driver
+ *
+ * Copyright (C) 2024 CS GROUP France
+ *
+ */
+
+#include <dm.h>
+#include <thermal.h>
+#include <spi.h>
+
+static int ti_lm74_get_temp(struct udevice *dev, int *temp)
+{
+	char buf[2];
+	s16 raw;
+	int ret;
+
+	ret = dm_spi_claim_bus(dev);
+	if (ret)
+		return ret;
+
+	ret = dm_spi_xfer(dev, 16, NULL, buf, SPI_XFER_BEGIN | SPI_XFER_END);
+
+	dm_spi_release_bus(dev);
+	if (ret)
+		return ret;
+
+	raw = ((buf[0] << 8) + buf[1]) >> 3;
+
+	*temp = (((int)raw * 125) + 1000) / 2000;
+
+	return 0;
+}
+
+static struct dm_thermal_ops ti_lm74_ops = {
+	.get_temp	= ti_lm74_get_temp,
+};
+
+static const struct udevice_id of_ti_lm74_match[] = {
+	{
+		.compatible = "ti,lm74",
+	},
+	{},
+};
+
+U_BOOT_DRIVER(ti_bandgap_thermal) = {
+	.name	= "ti_lm74_thermal",
+	.id	= UCLASS_THERMAL,
+	.ops	= &ti_lm74_ops,
+	.of_match = of_ti_lm74_match,
+};