diff mbox series

[4/6] arm64: zynqmp: Switch to ethernet-phy-id in kv260

Message ID 73b64f1a2b873b4e26bd2b365364bdf313794ae2.1645629459.git.michal.simek@xilinx.com
State Accepted
Commit ff7944829497ce94feb62268d0652487ea873ac2
Delegated to: Michal Simek
Headers show
Series arm64: zynqmp: Update SOM boards | expand

Commit Message

Michal Simek Feb. 23, 2022, 3:17 p.m. UTC 
Use ethernet-phy-id compatible string to properly describe phy reset on
kv260 boards. Previous description wasn't correct because reset was done
for mdio bus to operate and it was in this case used for different purpose
which was eth phy reset. With ethernet-phy-id phy reset happens only for
the phy via phy framework.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 6 ++++--
 arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index f58ad69be311..9445dace7393 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -168,16 +168,18 @@ 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index 7236e03a5a74..6ea950a13f45 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -155,16 +155,18 @@ 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };