@@ -3,6 +3,7 @@
#include <stdarg.h>
#include <linux/compiler.h>
+#include <vsprintf.h>
/* stdin */
int getchar(void);
@@ -7,5 +7,6 @@
#define __STDLIB_H_
#include <malloc.h>
+#include <rand.h>
#endif /* __STDLIB_H_ */
@@ -420,6 +420,10 @@ source lib/dhry/Kconfig
menu "Security support"
+menu "mbedtls libraries"
+source lib/mbedtls/Kconfig
+endmenu
+
config AES
bool "Support the AES algorithm"
help
@@ -94,6 +94,8 @@ obj-$(CONFIG_LIBAVB) += libavb/
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/
obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o
+obj-$(CONFIG_MBEDTLS_LIB) += mbedtls/
+
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o
obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o
new file mode 100644
@@ -0,0 +1,25 @@
+menuconfig MBEDTLS_LIB
+ bool "Use mbedtls libraries"
+ select MBEDTLS_LIB_CRYPTO
+ select MBEDTLS_LIB_X509
+ help
+ Enable mbedtls libraries
+
+if MBEDTLS_LIB
+
+config MBEDTLS_LIB_CRYPTO
+ bool "Crypto library"
+ help
+ Enable mbedtls crypto library
+
+config MBEDTLS_LIB_X509
+ bool "X509 library"
+ help
+ Enable mbedtls X509 library
+
+config MBEDTLS_LIB_TLS
+ bool "TLS library"
+ help
+ Enable mbedtls TLS library
+
+endif # MBEDTLS_LIB
new file mode 100644
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) 2023 Linaro Limited
+# Author: Raymond Mao <raymond.mao@linaro.org>
+
+MBEDTLS_LIB_DIR = external/mbedtls/library
+
+# mbedtls default config file
+ccflags-y += "-DMBEDTLS_CONFIG_FILE=\"mbedtls_def_config.h\""
+
+ccflags-y += \
+ -I$(src)/port \
+ -I$(src)/external/mbedtls/include \
+ -I$(src)/external/mbedtls/library \
+ # This line is intentionally left blank
+
+obj-$(CONFIG_MBEDTLS_LIB_CRYPTO) += mbedtls_lib_crypto.o
+mbedtls_lib_crypto-y := \
+ $(MBEDTLS_LIB_DIR)/aes.o \
+ $(MBEDTLS_LIB_DIR)/aesni.o \
+ $(MBEDTLS_LIB_DIR)/aesce.o \
+ $(MBEDTLS_LIB_DIR)/aria.o \
+ $(MBEDTLS_LIB_DIR)/asn1parse.o \
+ $(MBEDTLS_LIB_DIR)/asn1write.o \
+ $(MBEDTLS_LIB_DIR)/base64.o \
+ $(MBEDTLS_LIB_DIR)/bignum.o \
+ $(MBEDTLS_LIB_DIR)/bignum_core.o \
+ $(MBEDTLS_LIB_DIR)/bignum_mod.o \
+ $(MBEDTLS_LIB_DIR)/bignum_mod_raw.o \
+ $(MBEDTLS_LIB_DIR)/camellia.o \
+ $(MBEDTLS_LIB_DIR)/ccm.o \
+ $(MBEDTLS_LIB_DIR)/chacha20.o \
+ $(MBEDTLS_LIB_DIR)/chachapoly.o \
+ $(MBEDTLS_LIB_DIR)/cipher.o \
+ $(MBEDTLS_LIB_DIR)/cipher_wrap.o \
+ $(MBEDTLS_LIB_DIR)/cmac.o \
+ $(MBEDTLS_LIB_DIR)/constant_time.o \
+ $(MBEDTLS_LIB_DIR)/ctr_drbg.o \
+ $(MBEDTLS_LIB_DIR)/des.o \
+ $(MBEDTLS_LIB_DIR)/dhm.o \
+ $(MBEDTLS_LIB_DIR)/ecdh.o \
+ $(MBEDTLS_LIB_DIR)/ecdsa.o \
+ $(MBEDTLS_LIB_DIR)/ecjpake.o \
+ $(MBEDTLS_LIB_DIR)/ecp.o \
+ $(MBEDTLS_LIB_DIR)/ecp_curves.o \
+ $(MBEDTLS_LIB_DIR)/ecp_curves_new.o \
+ $(MBEDTLS_LIB_DIR)/entropy.o \
+ $(MBEDTLS_LIB_DIR)/entropy_poll.o \
+ $(MBEDTLS_LIB_DIR)/error.o \
+ $(MBEDTLS_LIB_DIR)/gcm.o \
+ $(MBEDTLS_LIB_DIR)/hkdf.o \
+ $(MBEDTLS_LIB_DIR)/hmac_drbg.o \
+ $(MBEDTLS_LIB_DIR)/lmots.o \
+ $(MBEDTLS_LIB_DIR)/lms.o \
+ $(MBEDTLS_LIB_DIR)/md.o \
+ $(MBEDTLS_LIB_DIR)/md5.o \
+ $(MBEDTLS_LIB_DIR)/memory_buffer_alloc.o \
+ $(MBEDTLS_LIB_DIR)/nist_kw.o \
+ $(MBEDTLS_LIB_DIR)/oid.o \
+ $(MBEDTLS_LIB_DIR)/padlock.o \
+ $(MBEDTLS_LIB_DIR)/pem.o \
+ $(MBEDTLS_LIB_DIR)/pk.o \
+ $(MBEDTLS_LIB_DIR)/pk_wrap.o \
+ $(MBEDTLS_LIB_DIR)/pkcs12.o \
+ $(MBEDTLS_LIB_DIR)/pkcs5.o \
+ $(MBEDTLS_LIB_DIR)/pkparse.o \
+ $(MBEDTLS_LIB_DIR)/pkwrite.o \
+ $(MBEDTLS_LIB_DIR)/platform.o \
+ $(MBEDTLS_LIB_DIR)/platform_util.o \
+ $(MBEDTLS_LIB_DIR)/poly1305.o \
+ $(MBEDTLS_LIB_DIR)/ripemd160.o \
+ $(MBEDTLS_LIB_DIR)/rsa.o \
+ $(MBEDTLS_LIB_DIR)/rsa_alt_helpers.o \
+ $(MBEDTLS_LIB_DIR)/sha1.o \
+ $(MBEDTLS_LIB_DIR)/sha256.o \
+ $(MBEDTLS_LIB_DIR)/sha512.o \
+ $(MBEDTLS_LIB_DIR)/sha3.o \
+ $(MBEDTLS_LIB_DIR)/threading.o \
+ $(MBEDTLS_LIB_DIR)/timing.o \
+ $(MBEDTLS_LIB_DIR)/version.o \
+ $(MBEDTLS_LIB_DIR)/version_features.o \
+ # This line is intentionally left blank
+
+obj-$(CONFIG_MBEDTLS_LIB_X509) += mbedtls_lib_x509.o
+mbedtls_lib_x509-y := \
+ $(MBEDTLS_LIB_DIR)/x509.o \
+ $(MBEDTLS_LIB_DIR)/x509_create.o \
+ $(MBEDTLS_LIB_DIR)/x509_crl.o \
+ $(MBEDTLS_LIB_DIR)/x509_crt.o \
+ $(MBEDTLS_LIB_DIR)/x509_csr.o \
+ $(MBEDTLS_LIB_DIR)/x509write.o \
+ $(MBEDTLS_LIB_DIR)/x509write_crt.o \
+ $(MBEDTLS_LIB_DIR)/x509write_csr.o \
+ $(MBEDTLS_LIB_DIR)/pkcs7.o \
+ # This line is intentionally left blank
+
+obj-$(CONFIG_MBEDTLS_LIB_TLS) += mbedtls_lib_tls.o
+mbedtls_lib_tls-y := \
+ $(MBEDTLS_LIB_DIR)/debug.o \
+ $(MBEDTLS_LIB_DIR)/mps_reader.o \
+ $(MBEDTLS_LIB_DIR)/mps_trace.o \
+ $(MBEDTLS_LIB_DIR)/net_sockets.o \
+ $(MBEDTLS_LIB_DIR)/ssl_cache.o \
+ $(MBEDTLS_LIB_DIR)/ssl_ciphersuites.o \
+ $(MBEDTLS_LIB_DIR)/ssl_client.o \
+ $(MBEDTLS_LIB_DIR)/ssl_cookie.o \
+ $(MBEDTLS_LIB_DIR)/ssl_debug_helpers_generated.o \
+ $(MBEDTLS_LIB_DIR)/ssl_msg.o \
+ $(MBEDTLS_LIB_DIR)/ssl_ticket.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls12_client.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls12_server.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls13_keys.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls13_client.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls13_server.o \
+ $(MBEDTLS_LIB_DIR)/ssl_tls13_generic.o \
+ # This line is intentionally left blank
new file mode 100644
@@ -0,0 +1,4125 @@
+/**
+ * \file mbedtls_config.h
+ *
+ * \brief Configuration options (set of defines)
+ *
+ * This set of compile-time options may be used to enable
+ * or disable features selectively, and reduce the global
+ * memory footprint.
+ */
+/*
+ * Copyright The Mbed TLS Contributors
+ * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+ */
+
+/**
+ * This is an optional version symbol that enables compatibility handling of
+ * config files.
+ *
+ * It is equal to the #MBEDTLS_VERSION_NUMBER of the Mbed TLS version that
+ * introduced the config format we want to be compatible with.
+ */
+//#define MBEDTLS_CONFIG_VERSION 0x03000000
+
+/**
+ * \name SECTION: System support
+ *
+ * This section sets system specific settings.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_HAVE_ASM
+ *
+ * The compiler has support for asm().
+ *
+ * Requires support for asm() in compiler.
+ *
+ * Used in:
+ * library/aesni.h
+ * library/aria.c
+ * library/bn_mul.h
+ * library/constant_time.c
+ * library/padlock.h
+ *
+ * Required by:
+ * MBEDTLS_AESCE_C
+ * MBEDTLS_AESNI_C (on some platforms)
+ * MBEDTLS_PADLOCK_C
+ *
+ * Comment to disable the use of assembly code.
+ */
+#define MBEDTLS_HAVE_ASM
+
+/**
+ * \def MBEDTLS_NO_UDBL_DIVISION
+ *
+ * The platform lacks support for double-width integer division (64-bit
+ * division on a 32-bit platform, 128-bit division on a 64-bit platform).
+ *
+ * Used in:
+ * include/mbedtls/bignum.h
+ * library/bignum.c
+ *
+ * The bignum code uses double-width division to speed up some operations.
+ * Double-width division is often implemented in software that needs to
+ * be linked with the program. The presence of a double-width integer
+ * type is usually detected automatically through preprocessor macros,
+ * but the automatic detection cannot know whether the code needs to
+ * and can be linked with an implementation of division for that type.
+ * By default division is assumed to be usable if the type is present.
+ * Uncomment this option to prevent the use of double-width division.
+ *
+ * Note that division for the native integer type is always required.
+ * Furthermore, a 64-bit type is always required even on a 32-bit
+ * platform, but it need not support multiplication or division. In some
+ * cases it is also desirable to disable some double-width operations. For
+ * example, if double-width division is implemented in software, disabling
+ * it can reduce code size in some embedded targets.
+ */
+//#define MBEDTLS_NO_UDBL_DIVISION
+
+/**
+ * \def MBEDTLS_NO_64BIT_MULTIPLICATION
+ *
+ * The platform lacks support for 32x32 -> 64-bit multiplication.
+ *
+ * Used in:
+ * library/poly1305.c
+ *
+ * Some parts of the library may use multiplication of two unsigned 32-bit
+ * operands with a 64-bit result in order to speed up computations. On some
+ * platforms, this is not available in hardware and has to be implemented in
+ * software, usually in a library provided by the toolchain.
+ *
+ * Sometimes it is not desirable to have to link to that library. This option
+ * removes the dependency of that library on platforms that lack a hardware
+ * 64-bit multiplier by embedding a software implementation in Mbed TLS.
+ *
+ * Note that depending on the compiler, this may decrease performance compared
+ * to using the library function provided by the toolchain.
+ */
+//#define MBEDTLS_NO_64BIT_MULTIPLICATION
+
+/**
+ * \def MBEDTLS_HAVE_SSE2
+ *
+ * CPU supports SSE2 instruction set.
+ *
+ * Uncomment if the CPU supports SSE2 (IA-32 specific).
+ */
+//#define MBEDTLS_HAVE_SSE2
+
+/**
+ * \def MBEDTLS_HAVE_TIME
+ *
+ * System has time.h and time().
+ * The time does not need to be correct, only time differences are used,
+ * by contrast with MBEDTLS_HAVE_TIME_DATE
+ *
+ * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
+ * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
+ * MBEDTLS_PLATFORM_STD_TIME.
+ *
+ * Comment if your system does not support time functions.
+ *
+ * \note If MBEDTLS_TIMING_C is set - to enable the semi-portable timing
+ * interface - timing.c will include time.h on suitable platforms
+ * regardless of the setting of MBEDTLS_HAVE_TIME, unless
+ * MBEDTLS_TIMING_ALT is used. See timing.c for more information.
+ */
+//#define MBEDTLS_HAVE_TIME
+
+/**
+ * \def MBEDTLS_HAVE_TIME_DATE
+ *
+ * System has time.h, time(), and an implementation for
+ * mbedtls_platform_gmtime_r() (see below).
+ * The time needs to be correct (not necessarily very accurate, but at least
+ * the date should be correct). This is used to verify the validity period of
+ * X.509 certificates.
+ *
+ * Comment if your system does not have a correct clock.
+ *
+ * \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that
+ * behaves similarly to the gmtime_r() function from the C standard. Refer to
+ * the documentation for mbedtls_platform_gmtime_r() for more information.
+ *
+ * \note It is possible to configure an implementation for
+ * mbedtls_platform_gmtime_r() at compile-time by using the macro
+ * MBEDTLS_PLATFORM_GMTIME_R_ALT.
+ */
+//#define MBEDTLS_HAVE_TIME_DATE
+
+/**
+ * \def MBEDTLS_PLATFORM_MEMORY
+ *
+ * Enable the memory allocation layer.
+ *
+ * By default Mbed TLS uses the system-provided calloc() and free().
+ * This allows different allocators (self-implemented or provided) to be
+ * provided to the platform abstraction layer.
+ *
+ * Enabling #MBEDTLS_PLATFORM_MEMORY without the
+ * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
+ * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
+ * free() function pointer at runtime.
+ *
+ * Enabling #MBEDTLS_PLATFORM_MEMORY and specifying
+ * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
+ * alternate function at compile time.
+ *
+ * An overview of how the value of mbedtls_calloc is determined:
+ *
+ * - if !MBEDTLS_PLATFORM_MEMORY
+ * - mbedtls_calloc = calloc
+ * - if MBEDTLS_PLATFORM_MEMORY
+ * - if (MBEDTLS_PLATFORM_CALLOC_MACRO && MBEDTLS_PLATFORM_FREE_MACRO):
+ * - mbedtls_calloc = MBEDTLS_PLATFORM_CALLOC_MACRO
+ * - if !(MBEDTLS_PLATFORM_CALLOC_MACRO && MBEDTLS_PLATFORM_FREE_MACRO):
+ * - Dynamic setup via mbedtls_platform_set_calloc_free is now possible with a default value MBEDTLS_PLATFORM_STD_CALLOC.
+ * - How is MBEDTLS_PLATFORM_STD_CALLOC handled?
+ * - if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS:
+ * - MBEDTLS_PLATFORM_STD_CALLOC is not set to anything;
+ * - MBEDTLS_PLATFORM_STD_MEM_HDR can be included if present;
+ * - if !MBEDTLS_PLATFORM_NO_STD_FUNCTIONS:
+ * - if MBEDTLS_PLATFORM_STD_CALLOC is present:
+ * - User-defined MBEDTLS_PLATFORM_STD_CALLOC is respected;
+ * - if !MBEDTLS_PLATFORM_STD_CALLOC:
+ * - MBEDTLS_PLATFORM_STD_CALLOC = calloc
+ *
+ * - At this point the presence of MBEDTLS_PLATFORM_STD_CALLOC is checked.
+ * - if !MBEDTLS_PLATFORM_STD_CALLOC
+ * - MBEDTLS_PLATFORM_STD_CALLOC = uninitialized_calloc
+ *
+ * - mbedtls_calloc = MBEDTLS_PLATFORM_STD_CALLOC.
+ *
+ * Defining MBEDTLS_PLATFORM_CALLOC_MACRO and #MBEDTLS_PLATFORM_STD_CALLOC at the same time is not possible.
+ * MBEDTLS_PLATFORM_CALLOC_MACRO and MBEDTLS_PLATFORM_FREE_MACRO must both be defined or undefined at the same time.
+ * #MBEDTLS_PLATFORM_STD_CALLOC and #MBEDTLS_PLATFORM_STD_FREE do not have to be defined at the same time, as, if they are used,
+ * dynamic setup of these functions is possible. See the tree above to see how are they handled in all cases.
+ * An uninitialized #MBEDTLS_PLATFORM_STD_CALLOC always fails, returning a null pointer.
+ * An uninitialized #MBEDTLS_PLATFORM_STD_FREE does not do anything.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Enable this layer to allow use of alternative memory allocators.
+ */
+//#define MBEDTLS_PLATFORM_MEMORY
+
+/**
+ * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+ *
+ * Do not assign standard functions in the platform layer (e.g. calloc() to
+ * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF)
+ *
+ * This makes sure there are no linking errors on platforms that do not support
+ * these functions. You will HAVE to provide alternatives, either at runtime
+ * via the platform_set_xxx() functions or at compile time by setting
+ * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a
+ * MBEDTLS_PLATFORM_XXX_MACRO.
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ *
+ * Uncomment to prevent default assignment of standard functions in the
+ * platform layer.
+ */
+//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+
+/**
+ * \def MBEDTLS_PLATFORM_EXIT_ALT
+ *
+ * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let Mbed TLS support the
+ * function in the platform abstraction layer.
+ *
+ * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, Mbed TLS will
+ * provide a function "mbedtls_platform_set_printf()" that allows you to set an
+ * alternative printf function pointer.
+ *
+ * All these define require MBEDTLS_PLATFORM_C to be defined!
+ *
+ * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows;
+ * it will be enabled automatically by check_config.h
+ *
+ * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as
+ * MBEDTLS_PLATFORM_XXX_MACRO!
+ *
+ * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
+ *
+ * Uncomment a macro to enable alternate implementation of specific base
+ * platform function
+ */
+//#define MBEDTLS_PLATFORM_SETBUF_ALT
+//#define MBEDTLS_PLATFORM_EXIT_ALT
+//#define MBEDTLS_PLATFORM_TIME_ALT
+//#define MBEDTLS_PLATFORM_FPRINTF_ALT
+//#define MBEDTLS_PLATFORM_PRINTF_ALT
+//#define MBEDTLS_PLATFORM_SNPRINTF_ALT
+//#define MBEDTLS_PLATFORM_VSNPRINTF_ALT
+//#define MBEDTLS_PLATFORM_NV_SEED_ALT
+//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT
+//#define MBEDTLS_PLATFORM_MS_TIME_ALT
+
+/**
+ * Uncomment the macro to let Mbed TLS use your alternate implementation of
+ * mbedtls_platform_gmtime_r(). This replaces the default implementation in
+ * platform_util.c.
+ *
+ * gmtime() is not a thread-safe function as defined in the C standard. The
+ * library will try to use safer implementations of this function, such as
+ * gmtime_r() when available. However, if Mbed TLS cannot identify the target
+ * system, the implementation of mbedtls_platform_gmtime_r() will default to
+ * using the standard gmtime(). In this case, calls from the library to
+ * gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex
+ * if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the
+ * library are also guarded with this mutex to avoid race conditions. However,
+ * if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will
+ * unconditionally use the implementation for mbedtls_platform_gmtime_r()
+ * supplied at compile time.
+ */
+//#define MBEDTLS_PLATFORM_GMTIME_R_ALT
+
+/**
+ * Uncomment the macro to let Mbed TLS use your alternate implementation of
+ * mbedtls_platform_zeroize(), to wipe sensitive data in memory. This replaces
+ * the default implementation in platform_util.c.
+ *
+ * By default, the library uses a system function such as memset_s()
+ * (optional feature of C11), explicit_bzero() (BSD and compatible), or
+ * SecureZeroMemory (Windows). If no such function is detected, the library
+ * falls back to a plain C implementation. Compilers are technically
+ * permitted to optimize this implementation out, meaning that the memory is
+ * not actually wiped. The library tries to prevent that, but the C language
+ * makes it impossible to guarantee that the memory will always be wiped.
+ *
+ * If your platform provides a guaranteed method to wipe memory which
+ * `platform_util.c` does not detect, define this macro to the name of
+ * a function that takes two arguments, a `void *` pointer and a length,
+ * and wipes that many bytes starting at the specified address. For example,
+ * if your platform has explicit_bzero() but `platform_util.c` does not
+ * detect its presence, define `MBEDTLS_PLATFORM_ZEROIZE_ALT` to be
+ * `explicit_bzero` to use that function as mbedtls_platform_zeroize().
+ */
+//#define MBEDTLS_PLATFORM_ZEROIZE_ALT
+
+/**
+ * \def MBEDTLS_DEPRECATED_WARNING
+ *
+ * Mark deprecated functions and features so that they generate a warning if
+ * used. Functionality deprecated in one version will usually be removed in the
+ * next version. You can enable this to help you prepare the transition to a
+ * new major version by making sure your code is not using this functionality.
+ *
+ * This only works with GCC and Clang. With other compilers, you may want to
+ * use MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Uncomment to get warnings on using deprecated functions and features.
+ */
+//#define MBEDTLS_DEPRECATED_WARNING
+
+/**
+ * \def MBEDTLS_DEPRECATED_REMOVED
+ *
+ * Remove deprecated functions and features so that they generate an error if
+ * used. Functionality deprecated in one version will usually be removed in the
+ * next version. You can enable this to help you prepare the transition to a
+ * new major version by making sure your code is not using this functionality.
+ *
+ * Uncomment to get errors on using deprecated functions and features.
+ */
+//#define MBEDTLS_DEPRECATED_REMOVED
+
+/** \} name SECTION: System support */
+
+/**
+ * \name SECTION: Mbed TLS feature support
+ *
+ * This section sets support for features that are or are not needed
+ * within the modules that are enabled.
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_TIMING_ALT
+ *
+ * Uncomment to provide your own alternate implementation for
+ * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay()
+ *
+ * Only works if you have MBEDTLS_TIMING_C enabled.
+ *
+ * You will need to provide a header "timing_alt.h" and an implementation at
+ * compile time.
+ */
+//#define MBEDTLS_TIMING_ALT
+
+/**
+ * \def MBEDTLS_AES_ALT
+ *
+ * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let Mbed TLS use your
+ * alternate core implementation of a symmetric crypto, an arithmetic or hash
+ * module (e.g. platform specific assembly optimized implementations). Keep
+ * in mind that the function prototypes should remain the same.
+ *
+ * This replaces the whole module. If you only want to replace one of the
+ * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_AES_ALT, Mbed TLS will no longer
+ * provide the "struct mbedtls_aes_context" definition and omit the base
+ * function declarations and implementations. "aes_alt.h" will be included from
+ * "aes.h" to include the new function definitions.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * module.
+ *
+ * \warning MD5, DES and SHA-1 are considered weak and their
+ * use constitutes a security risk. If possible, we recommend
+ * avoiding dependencies on them, and considering stronger message
+ * digests and ciphers instead.
+ *
+ */
+//#define MBEDTLS_AES_ALT
+//#define MBEDTLS_ARIA_ALT
+//#define MBEDTLS_CAMELLIA_ALT
+//#define MBEDTLS_CCM_ALT
+//#define MBEDTLS_CHACHA20_ALT
+//#define MBEDTLS_CHACHAPOLY_ALT
+//#define MBEDTLS_CMAC_ALT
+//#define MBEDTLS_DES_ALT
+//#define MBEDTLS_DHM_ALT
+//#define MBEDTLS_ECJPAKE_ALT
+//#define MBEDTLS_GCM_ALT
+//#define MBEDTLS_NIST_KW_ALT
+//#define MBEDTLS_MD5_ALT
+//#define MBEDTLS_POLY1305_ALT
+//#define MBEDTLS_RIPEMD160_ALT
+//#define MBEDTLS_RSA_ALT
+//#define MBEDTLS_SHA1_ALT
+//#define MBEDTLS_SHA256_ALT
+//#define MBEDTLS_SHA512_ALT
+
+/*
+ * When replacing the elliptic curve module, please consider, that it is
+ * implemented with two .c files:
+ * - ecp.c
+ * - ecp_curves.c
+ * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT
+ * macros as described above. The only difference is that you have to make sure
+ * that you provide functionality for both .c files.
+ */
+//#define MBEDTLS_ECP_ALT
+
+/**
+ * \def MBEDTLS_SHA256_PROCESS_ALT
+ *
+ * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let Mbed TLS use you
+ * alternate core implementation of symmetric crypto or hash function. Keep in
+ * mind that function prototypes should remain the same.
+ *
+ * This replaces only one function. The header file from Mbed TLS is still
+ * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags.
+ *
+ * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, Mbed TLS will
+ * no longer provide the mbedtls_sha1_process() function, but it will still provide
+ * the other function (using your mbedtls_sha1_process() function) and the definition
+ * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible
+ * with this definition.
+ *
+ * \note If you use the AES_xxx_ALT macros, then it is recommended to also set
+ * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES
+ * tables.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ *
+ * \warning MD5, DES and SHA-1 are considered weak and their use
+ * constitutes a security risk. If possible, we recommend avoiding
+ * dependencies on them, and considering stronger message digests
+ * and ciphers instead.
+ *
+ * \warning If both MBEDTLS_ECDSA_SIGN_ALT and MBEDTLS_ECDSA_DETERMINISTIC are
+ * enabled, then the deterministic ECDH signature functions pass the
+ * the static HMAC-DRBG as RNG to mbedtls_ecdsa_sign(). Therefore
+ * alternative implementations should use the RNG only for generating
+ * the ephemeral key and nothing else. If this is not possible, then
+ * MBEDTLS_ECDSA_DETERMINISTIC should be disabled and an alternative
+ * implementation should be provided for mbedtls_ecdsa_sign_det_ext().
+ *
+ */
+//#define MBEDTLS_MD5_PROCESS_ALT
+//#define MBEDTLS_RIPEMD160_PROCESS_ALT
+//#define MBEDTLS_SHA1_PROCESS_ALT
+//#define MBEDTLS_SHA256_PROCESS_ALT
+//#define MBEDTLS_SHA512_PROCESS_ALT
+//#define MBEDTLS_DES_SETKEY_ALT
+//#define MBEDTLS_DES_CRYPT_ECB_ALT
+//#define MBEDTLS_DES3_CRYPT_ECB_ALT
+//#define MBEDTLS_AES_SETKEY_ENC_ALT
+//#define MBEDTLS_AES_SETKEY_DEC_ALT
+//#define MBEDTLS_AES_ENCRYPT_ALT
+//#define MBEDTLS_AES_DECRYPT_ALT
+//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT
+//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT
+//#define MBEDTLS_ECDSA_VERIFY_ALT
+//#define MBEDTLS_ECDSA_SIGN_ALT
+//#define MBEDTLS_ECDSA_GENKEY_ALT
+
+/**
+ * \def MBEDTLS_ECP_INTERNAL_ALT
+ *
+ * Expose a part of the internal interface of the Elliptic Curve Point module.
+ *
+ * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let Mbed TLS use your
+ * alternative core implementation of elliptic curve arithmetic. Keep in mind
+ * that function prototypes should remain the same.
+ *
+ * This partially replaces one function. The header file from Mbed TLS is still
+ * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation
+ * is still present and it is used for group structures not supported by the
+ * alternative.
+ *
+ * The original implementation can in addition be removed by setting the
+ * MBEDTLS_ECP_NO_FALLBACK option, in which case any function for which the
+ * corresponding MBEDTLS_ECP__FUNCTION_NAME__ALT macro is defined will not be
+ * able to fallback to curves not supported by the alternative implementation.
+ *
+ * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT
+ * and implementing the following functions:
+ * unsigned char mbedtls_internal_ecp_grp_capable(
+ * const mbedtls_ecp_group *grp )
+ * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp )
+ * void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp )
+ * The mbedtls_internal_ecp_grp_capable function should return 1 if the
+ * replacement functions implement arithmetic for the given group and 0
+ * otherwise.
+ * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are
+ * called before and after each point operation and provide an opportunity to
+ * implement optimized set up and tear down instructions.
+ *
+ * Example: In case you set MBEDTLS_ECP_INTERNAL_ALT and
+ * MBEDTLS_ECP_DOUBLE_JAC_ALT, Mbed TLS will still provide the ecp_double_jac()
+ * function, but will use your mbedtls_internal_ecp_double_jac() if the group
+ * for the operation is supported by your implementation (i.e. your
+ * mbedtls_internal_ecp_grp_capable() function returns 1 for this group). If the
+ * group is not supported by your implementation, then the original Mbed TLS
+ * implementation of ecp_double_jac() is used instead, unless this fallback
+ * behaviour is disabled by setting MBEDTLS_ECP_NO_FALLBACK (in which case
+ * ecp_double_jac() will return MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE).
+ *
+ * The function prototypes and the definition of mbedtls_ecp_group and
+ * mbedtls_ecp_point will not change based on MBEDTLS_ECP_INTERNAL_ALT, so your
+ * implementation of mbedtls_internal_ecp__function_name__ must be compatible
+ * with their definitions.
+ *
+ * Uncomment a macro to enable alternate implementation of the corresponding
+ * function.
+ */
+/* Required for all the functions in this section */
+//#define MBEDTLS_ECP_INTERNAL_ALT
+/* Turn off software fallback for curves not supported in hardware */
+//#define MBEDTLS_ECP_NO_FALLBACK
+/* Support for Weierstrass curves with Jacobi representation */
+//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT
+//#define MBEDTLS_ECP_ADD_MIXED_ALT
+//#define MBEDTLS_ECP_DOUBLE_JAC_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT
+//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT
+/* Support for curves with Montgomery arithmetic */
+//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT
+//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT
+//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
+
+/**
+ * \def MBEDTLS_ENTROPY_HARDWARE_ALT
+ *
+ * Uncomment this macro to let Mbed TLS use your own implementation of a
+ * hardware entropy collector.
+ *
+ * Your function must be called \c mbedtls_hardware_poll(), have the same
+ * prototype as declared in library/entropy_poll.h, and accept NULL as first
+ * argument.
+ *
+ * Uncomment to use your own hardware entropy collector.
+ */
+//#define MBEDTLS_ENTROPY_HARDWARE_ALT
+
+/**
+ * \def MBEDTLS_AES_ROM_TABLES
+ *
+ * Use precomputed AES tables stored in ROM.
+ *
+ * Uncomment this macro to use precomputed AES tables stored in ROM.
+ * Comment this macro to generate AES tables in RAM at runtime.
+ *
+ * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb
+ * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the
+ * initialization time before the first AES operation can be performed.
+ * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c
+ * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded
+ * performance if ROM access is slower than RAM access.
+ *
+ * This option is independent of \c MBEDTLS_AES_FEWER_TABLES.
+ */
+//#define MBEDTLS_AES_ROM_TABLES
+
+/**
+ * \def MBEDTLS_AES_FEWER_TABLES
+ *
+ * Use less ROM/RAM for AES tables.
+ *
+ * Uncommenting this macro omits 75% of the AES tables from
+ * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES)
+ * by computing their values on the fly during operations
+ * (the tables are entry-wise rotations of one another).
+ *
+ * Tradeoff: Uncommenting this reduces the RAM / ROM footprint
+ * by ~6kb but at the cost of more arithmetic operations during
+ * runtime. Specifically, one has to compare 4 accesses within
+ * different tables to 4 accesses with additional arithmetic
+ * operations within the same table. The performance gain/loss
+ * depends on the system and memory details.
+ *
+ * This option is independent of \c MBEDTLS_AES_ROM_TABLES.
+ */
+//#define MBEDTLS_AES_FEWER_TABLES
+
+/**
+ * \def MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+ *
+ * Use only 128-bit keys in AES operations to save ROM.
+ *
+ * Uncomment this macro to remove support for AES operations that use 192-
+ * or 256-bit keys.
+ *
+ * Uncommenting this macro reduces the size of AES code by ~300 bytes
+ * on v8-M/Thumb2.
+ *
+ * Module: library/aes.c
+ *
+ * Requires: MBEDTLS_AES_C
+ */
+//#define MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+
+/*
+ * Disable plain C implementation for AES.
+ *
+ * When the plain C implementation is enabled, and an implementation using a
+ * special CPU feature (such as MBEDTLS_AESCE_C) is also enabled, runtime
+ * detection will be used to select between them.
+ *
+ * If only one implementation is present, runtime detection will not be used.
+ * This configuration will crash at runtime if running on a CPU without the
+ * necessary features. It will not build unless at least one of MBEDTLS_AESCE_C
+ * and/or MBEDTLS_AESNI_C is enabled & present in the build.
+ */
+//#define MBEDTLS_AES_USE_HARDWARE_ONLY
+
+/**
+ * \def MBEDTLS_CAMELLIA_SMALL_MEMORY
+ *
+ * Use less ROM for the Camellia implementation (saves about 768 bytes).
+ *
+ * Uncomment this macro to use less memory for Camellia.
+ */
+//#define MBEDTLS_CAMELLIA_SMALL_MEMORY
+
+/**
+ * \def MBEDTLS_CHECK_RETURN_WARNING
+ *
+ * If this macro is defined, emit a compile-time warning if application code
+ * calls a function without checking its return value, but the return value
+ * should generally be checked in portable applications.
+ *
+ * This is only supported on platforms where #MBEDTLS_CHECK_RETURN is
+ * implemented. Otherwise this option has no effect.
+ *
+ * Uncomment to get warnings on using fallible functions without checking
+ * their return value.
+ *
+ * \note This feature is a work in progress.
+ * Warnings will be added to more functions in the future.
+ *
+ * \note A few functions are considered critical, and ignoring the return
+ * value of these functions will trigger a warning even if this
+ * macro is not defined. To completely disable return value check
+ * warnings, define #MBEDTLS_CHECK_RETURN with an empty expansion.
+ */
+//#define MBEDTLS_CHECK_RETURN_WARNING
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CBC
+ *
+ * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CBC
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CFB
+ *
+ * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_CTR
+ *
+ * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_CTR
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_OFB
+ *
+ * Enable Output Feedback mode (OFB) for symmetric ciphers.
+ */
+#define MBEDTLS_CIPHER_MODE_OFB
+
+/**
+ * \def MBEDTLS_CIPHER_MODE_XTS
+ *
+ * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES.
+ */
+#define MBEDTLS_CIPHER_MODE_XTS
+
+/**
+ * \def MBEDTLS_CIPHER_NULL_CIPHER
+ *
+ * Enable NULL cipher.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * encryption or channels without any security!
+ *
+ * To enable the following ciphersuites:
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA
+ * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA
+ * MBEDTLS_TLS_RSA_WITH_NULL_SHA256
+ * MBEDTLS_TLS_RSA_WITH_NULL_SHA
+ * MBEDTLS_TLS_RSA_WITH_NULL_MD5
+ * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA
+ * MBEDTLS_TLS_PSK_WITH_NULL_SHA384
+ * MBEDTLS_TLS_PSK_WITH_NULL_SHA256
+ * MBEDTLS_TLS_PSK_WITH_NULL_SHA
+ *
+ * Uncomment this macro to enable the NULL cipher and ciphersuites
+ */
+//#define MBEDTLS_CIPHER_NULL_CIPHER
+
+/**
+ * \def MBEDTLS_CIPHER_PADDING_PKCS7
+ *
+ * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
+ * specific padding modes in the cipher layer with cipher modes that support
+ * padding (e.g. CBC)
+ *
+ * If you disable all padding modes, only full blocks can be used with CBC.
+ *
+ * Enable padding modes in the cipher layer.
+ */
+#define MBEDTLS_CIPHER_PADDING_PKCS7
+#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
+#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
+#define MBEDTLS_CIPHER_PADDING_ZEROS
+
+/** \def MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+ *
+ * Uncomment this macro to use a 128-bit key in the CTR_DRBG module.
+ * Without this, CTR_DRBG uses a 256-bit key
+ * unless \c MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH is set.
+ */
+//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+
+/**
+ * Enable the verified implementations of ECDH primitives from Project Everest
+ * (currently only Curve25519). This feature changes the layout of ECDH
+ * contexts and therefore is a compatibility break for applications that access
+ * fields of a mbedtls_ecdh_context structure directly. See also
+ * MBEDTLS_ECDH_LEGACY_CONTEXT in include/mbedtls/ecdh.h.
+ *
+ * The Everest code is provided under the Apache 2.0 license only; therefore enabling this
+ * option is not compatible with taking the library under the GPL v2.0-or-later license.
+ */
+//#define MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+
+/**
+ * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
+ *
+ * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
+ * module. By default all supported curves are enabled.
+ *
+ * Comment macros to disable the curve and functions for it
+ */
+/* Short Weierstrass curves (supporting ECP, ECDH, ECDSA) */
+#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
+#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
+#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
+#define MBEDTLS_ECP_DP_BP256R1_ENABLED
+#define MBEDTLS_ECP_DP_BP384R1_ENABLED
+#define MBEDTLS_ECP_DP_BP512R1_ENABLED
+/* Montgomery curves (supporting ECP) */
+#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
+#define MBEDTLS_ECP_DP_CURVE448_ENABLED
+
+/**
+ * \def MBEDTLS_ECP_NIST_OPTIM
+ *
+ * Enable specific 'modulo p' routines for each NIST prime.
+ * Depending on the prime and architecture, makes operations 4 to 8 times
+ * faster on the corresponding curve.
+ *
+ * Comment this macro to disable NIST curves optimisation.
+ */
+#define MBEDTLS_ECP_NIST_OPTIM
+
+/**
+ * \def MBEDTLS_ECP_RESTARTABLE
+ *
+ * Enable "non-blocking" ECC operations that can return early and be resumed.
+ *
+ * This allows various functions to pause by returning
+ * #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module,
+ * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in
+ * order to further progress and eventually complete their operation. This is
+ * controlled through mbedtls_ecp_set_max_ops() which limits the maximum
+ * number of ECC operations a function may perform before pausing; see
+ * mbedtls_ecp_set_max_ops() for more information.
+ *
+ * This is useful in non-threaded environments if you want to avoid blocking
+ * for too long on ECC (and, hence, X.509 or SSL/TLS) operations.
+ *
+ * This option:
+ * - Adds xxx_restartable() variants of existing operations in the
+ * following modules, with corresponding restart context types:
+ * - ECP (for Short Weierstrass curves only): scalar multiplication (mul),
+ * linear combination (muladd);
+ * - ECDSA: signature generation & verification;
+ * - PK: signature generation & verification;
+ * - X509: certificate chain verification.
+ * - Adds mbedtls_ecdh_enable_restart() in the ECDH module.
+ * - Changes the behaviour of TLS 1.2 clients (not servers) when using the
+ * ECDHE-ECDSA key exchange (not other key exchanges) to make all ECC
+ * computations restartable:
+ * - ECDH operations from the key exchange, only for Short Weierstrass
+ * curves, only when MBEDTLS_USE_PSA_CRYPTO is not enabled.
+ * - verification of the server's key exchange signature;
+ * - verification of the server's certificate chain;
+ * - generation of the client's signature if client authentication is used,
+ * with an ECC key/certificate.
+ *
+ * \note In the cases above, the usual SSL/TLS functions, such as
+ * mbedtls_ssl_handshake(), can now return
+ * MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS.
+ *
+ * \note When this option and MBEDTLS_USE_PSA_CRYPTO are both enabled,
+ * restartable operations in PK, X.509 and TLS (see above) are not
+ * using PSA. On the other hand, ECDH computations in TLS are using
+ * PSA, and are not restartable. These are temporary limitations that
+ * should be lifted in the future.
+ *
+ * \note This option only works with the default software implementation of
+ * elliptic curve functionality. It is incompatible with
+ * MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT.
+ *
+ * Requires: MBEDTLS_ECP_C
+ *
+ * Uncomment this macro to enable restartable ECC computations.
+ */
+//#define MBEDTLS_ECP_RESTARTABLE
+
+/**
+ * Uncomment to enable using new bignum code in the ECC modules.
+ *
+ * \warning This is currently experimental, incomplete and therefore should not
+ * be used in production.
+ */
+//#define MBEDTLS_ECP_WITH_MPI_UINT
+
+/**
+ * \def MBEDTLS_ECDSA_DETERMINISTIC
+ *
+ * Enable deterministic ECDSA (RFC 6979).
+ * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
+ * may result in a compromise of the long-term signing key. This is avoided by
+ * the deterministic variant.
+ *
+ * Requires: MBEDTLS_HMAC_DRBG_C, MBEDTLS_ECDSA_C
+ *
+ * Comment this macro to disable deterministic ECDSA.
+ */
+#define MBEDTLS_ECDSA_DETERMINISTIC
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+ *
+ * Enable the PSK based ciphersuite modes in SSL / TLS.
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+ *
+ * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ *
+ * \warning Using DHE constitutes a security risk as it
+ * is not possible to validate custom DH parameters.
+ * If possible, it is recommended users should consider
+ * preferring other methods of key exchange.
+ * See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+ *
+ * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDH)
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+ *
+ * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+ *
+ * Enable the RSA-only based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ */
+#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+ *
+ * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ *
+ * \warning Using DHE constitutes a security risk as it
+ * is not possible to validate custom DH parameters.
+ * If possible, it is recommended users should consider
+ * preferring other methods of key exchange.
+ * See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+ *
+ * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDH)
+ * MBEDTLS_RSA_C
+ * MBEDTLS_PKCS1_V15
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+ *
+ * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDH)
+ * MBEDTLS_ECDSA_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDSA)
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+ *
+ * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDH)
+ * MBEDTLS_ECDSA_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDSA)
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+ *
+ * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: MBEDTLS_ECDH_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDH)
+ * MBEDTLS_RSA_C
+ * MBEDTLS_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+
+/**
+ * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+ *
+ * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
+ *
+ * \warning This is currently experimental. EC J-PAKE support is based on the
+ * Thread v1.0.0 specification; incompatible changes to the specification
+ * might still happen. For this reason, this is disabled by default.
+ *
+ * Requires: MBEDTLS_ECJPAKE_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_JPAKE)
+ * SHA-256 (via MBEDTLS_SHA256_C or a PSA driver)
+ * MBEDTLS_ECP_DP_SECP256R1_ENABLED
+ *
+ * \warning If SHA-256 is provided only by a PSA driver, you must call
+ * psa_crypto_init() before the first hanshake (even if
+ * MBEDTLS_USE_PSA_CRYPTO is disabled).
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
+ */
+//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+
+/**
+ * \def MBEDTLS_PK_PARSE_EC_EXTENDED
+ *
+ * Enhance support for reading EC keys using variants of SEC1 not allowed by
+ * RFC 5915 and RFC 5480.
+ *
+ * Currently this means parsing the SpecifiedECDomain choice of EC
+ * parameters (only known groups are supported, not arbitrary domains, to
+ * avoid validation issues).
+ *
+ * Disable if you only need to support RFC 5915 + 5480 key formats.
+ */
+#define MBEDTLS_PK_PARSE_EC_EXTENDED
+
+/**
+ * \def MBEDTLS_PK_PARSE_EC_COMPRESSED
+ *
+ * Enable the support for parsing public keys of type Short Weierstrass
+ * (MBEDTLS_ECP_DP_SECP_XXX and MBEDTLS_ECP_DP_BP_XXX) which are using the
+ * compressed point format. This parsing is done through ECP module's functions.
+ *
+ * \note As explained in the description of MBEDTLS_ECP_PF_COMPRESSED (in ecp.h)
+ * the only unsupported curves are MBEDTLS_ECP_DP_SECP224R1 and
+ * MBEDTLS_ECP_DP_SECP224K1.
+ */
+#define MBEDTLS_PK_PARSE_EC_COMPRESSED
+
+/**
+ * \def MBEDTLS_ERROR_STRERROR_DUMMY
+ *
+ * Enable a dummy error function to make use of mbedtls_strerror() in
+ * third party libraries easier when MBEDTLS_ERROR_C is disabled
+ * (no effect when MBEDTLS_ERROR_C is enabled).
+ *
+ * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
+ * not using mbedtls_strerror() or error_strerror() in your application.
+ *
+ * Disable if you run into name conflicts and want to really remove the
+ * mbedtls_strerror()
+ */
+#define MBEDTLS_ERROR_STRERROR_DUMMY
+
+/**
+ * \def MBEDTLS_GENPRIME
+ *
+ * Enable the prime-number generation code.
+ *
+ * Requires: MBEDTLS_BIGNUM_C
+ */
+#define MBEDTLS_GENPRIME
+
+/**
+ * \def MBEDTLS_FS_IO
+ *
+ * Enable functions that use the filesystem.
+ */
+//#define MBEDTLS_FS_IO
+
+/**
+ * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+ *
+ * Do not add default entropy sources in mbedtls_entropy_init().
+ *
+ * This is useful to have more control over the added entropy sources in an
+ * application.
+ *
+ * Uncomment this macro to prevent loading of default entropy functions.
+ */
+//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+
+/**
+ * \def MBEDTLS_NO_PLATFORM_ENTROPY
+ *
+ * Do not use built-in platform entropy functions.
+ * This is useful if your platform does not support
+ * standards like the /dev/urandom or Windows CryptoAPI.
+ *
+ * Uncomment this macro to disable the built-in platform entropy functions.
+ */
+//#define MBEDTLS_NO_PLATFORM_ENTROPY
+
+/**
+ * \def MBEDTLS_ENTROPY_FORCE_SHA256
+ *
+ * Force the entropy accumulator to use a SHA-256 accumulator instead of the
+ * default SHA-512 based one (if both are available).
+ *
+ * Requires: MBEDTLS_SHA256_C
+ *
+ * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
+ * if you have performance concerns.
+ *
+ * This option is only useful if both MBEDTLS_SHA256_C and
+ * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used.
+ */
+//#define MBEDTLS_ENTROPY_FORCE_SHA256
+
+/**
+ * \def MBEDTLS_ENTROPY_NV_SEED
+ *
+ * Enable the non-volatile (NV) seed file-based entropy source.
+ * (Also enables the NV seed read/write functions in the platform layer)
+ *
+ * This is crucial (if not required) on systems that do not have a
+ * cryptographic entropy source (in hardware or kernel) available.
+ *
+ * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C
+ *
+ * \note The read/write functions that are used by the entropy source are
+ * determined in the platform layer, and can be modified at runtime and/or
+ * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used.
+ *
+ * \note If you use the default implementation functions that read a seedfile
+ * with regular fopen(), please make sure you make a seedfile with the
+ * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at
+ * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from
+ * and written to or you will get an entropy source error! The default
+ * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE
+ * bytes from the file.
+ *
+ * \note The entropy collector will write to the seed file before entropy is
+ * given to an external source, to update it.
+ */
+//#define MBEDTLS_ENTROPY_NV_SEED
+
+/* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+ *
+ * Enable key identifiers that encode a key owner identifier.
+ *
+ * The owner of a key is identified by a value of type ::mbedtls_key_owner_id_t
+ * which is currently hard-coded to be int32_t.
+ *
+ * Note that this option is meant for internal use only and may be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+
+/**
+ * \def MBEDTLS_MEMORY_DEBUG
+ *
+ * Enable debugging of buffer allocator memory issues. Automatically prints
+ * (to stderr) all (fatal) messages on memory allocation issues. Enables
+ * function for 'debug output' of allocated memory.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Uncomment this macro to let the buffer allocator print out error messages.
+ */
+//#define MBEDTLS_MEMORY_DEBUG
+
+/**
+ * \def MBEDTLS_MEMORY_BACKTRACE
+ *
+ * Include backtrace information with each allocated block.
+ *
+ * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ * GLIBC-compatible backtrace() and backtrace_symbols() support
+ *
+ * Uncomment this macro to include backtrace information
+ */
+//#define MBEDTLS_MEMORY_BACKTRACE
+
+/**
+ * \def MBEDTLS_PK_RSA_ALT_SUPPORT
+ *
+ * Support external private RSA keys (eg from a HSM) in the PK layer.
+ *
+ * Comment this macro to disable support for external private RSA keys.
+ */
+#define MBEDTLS_PK_RSA_ALT_SUPPORT
+
+/**
+ * \def MBEDTLS_PKCS1_V15
+ *
+ * Enable support for PKCS#1 v1.5 encoding.
+ *
+ * Requires: MBEDTLS_RSA_C
+ *
+ * This enables support for PKCS#1 v1.5 operations.
+ */
+#define MBEDTLS_PKCS1_V15
+
+/**
+ * \def MBEDTLS_PKCS1_V21
+ *
+ * Enable support for PKCS#1 v2.1 encoding.
+ *
+ * Requires: MBEDTLS_RSA_C
+ *
+ * \warning If using a hash that is only provided by PSA drivers, you must
+ * call psa_crypto_init() before doing any PKCS#1 v2.1 operation.
+ *
+ * This enables support for RSAES-OAEP and RSASSA-PSS operations.
+ */
+#define MBEDTLS_PKCS1_V21
+
+/** \def MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+ *
+ * Enable support for platform built-in keys. If you enable this feature,
+ * you must implement the function mbedtls_psa_platform_get_builtin_key().
+ * See the documentation of that function for more information.
+ *
+ * Built-in keys are typically derived from a hardware unique key or
+ * stored in a secure element.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C.
+ *
+ * \warning This interface is experimental and may change or be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+
+/** \def MBEDTLS_PSA_CRYPTO_CLIENT
+ *
+ * Enable support for PSA crypto client.
+ *
+ * \note This option allows to include the code necessary for a PSA
+ * crypto client when the PSA crypto implementation is not included in
+ * the library (MBEDTLS_PSA_CRYPTO_C disabled). The code included is the
+ * code to set and get PSA key attributes.
+ * The development of PSA drivers partially relying on the library to
+ * fulfill the hardware gaps is another possible usage of this option.
+ *
+ * \warning This interface is experimental and may change or be removed
+ * without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_CLIENT
+
+/** \def MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+ *
+ * Make the PSA Crypto module use an external random generator provided
+ * by a driver, instead of Mbed TLS's entropy and DRBG modules.
+ *
+ * \note This random generator must deliver random numbers with cryptographic
+ * quality and high performance. It must supply unpredictable numbers
+ * with a uniform distribution. The implementation of this function
+ * is responsible for ensuring that the random generator is seeded
+ * with sufficient entropy. If you have a hardware TRNG which is slow
+ * or delivers non-uniform output, declare it as an entropy source
+ * with mbedtls_entropy_add_source() instead of enabling this option.
+ *
+ * If you enable this option, you must configure the type
+ * ::mbedtls_psa_external_random_context_t in psa/crypto_platform.h
+ * and define a function called mbedtls_psa_external_get_random()
+ * with the following prototype:
+ * ```
+ * psa_status_t mbedtls_psa_external_get_random(
+ * mbedtls_psa_external_random_context_t *context,
+ * uint8_t *output, size_t output_size, size_t *output_length);
+ * );
+ * ```
+ * The \c context value is initialized to 0 before the first call.
+ * The function must fill the \c output buffer with \c output_size bytes
+ * of random data and set \c *output_length to \c output_size.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ * \warning If you enable this option, code that uses the PSA cryptography
+ * interface will not use any of the entropy sources set up for
+ * the entropy module, nor the NV seed that MBEDTLS_ENTROPY_NV_SEED
+ * enables.
+ *
+ * \note This option is experimental and may be removed without notice.
+ */
+//#define MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_SPM
+ *
+ * When MBEDTLS_PSA_CRYPTO_SPM is defined, the code is built for SPM (Secure
+ * Partition Manager) integration which separates the code into two parts: a
+ * NSPE (Non-Secure Process Environment) and an SPE (Secure Process
+ * Environment).
+ *
+ * If you enable this option, your build environment must include a header
+ * file `"crypto_spe.h"` (either in the `psa` subdirectory of the Mbed TLS
+ * header files, or in another directory on the compiler's include search
+ * path). Alternatively, your platform may customize the header
+ * `psa/crypto_platform.h`, in which case it can skip or replace the
+ * inclusion of `"crypto_spe.h"`.
+ *
+ * Module: library/psa_crypto.c
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ */
+//#define MBEDTLS_PSA_CRYPTO_SPM
+
+/**
+ * Uncomment to enable p256-m. This is an alternative implementation of
+ * key generation, ECDH and (randomized) ECDSA on the curve SECP256R1.
+ * Compared to the default implementation:
+ *
+ * - p256-m has a much smaller code size and RAM footprint.
+ * - p256-m is only available via the PSA API. This includes the pk module
+ * when #MBEDTLS_USE_PSA_CRYPTO is enabled.
+ * - p256-m does not support deterministic ECDSA, EC-JPAKE, custom protocols
+ * over the core arithmetic, or deterministic derivation of keys.
+ *
+ * We recommend enabling this option if your application uses the PSA API
+ * and the only elliptic curve support it needs is ECDH and ECDSA over
+ * SECP256R1.
+ *
+ * If you enable this option, you do not need to enable any ECC-related
+ * MBEDTLS_xxx option. You do need to separately request support for the
+ * cryptographic mechanisms through the PSA API:
+ * - #MBEDTLS_PSA_CRYPTO_C and #MBEDTLS_PSA_CRYPTO_CONFIG for PSA-based
+ * configuration;
+ * - #MBEDTLS_USE_PSA_CRYPTO if you want to use p256-m from PK, X.509 or TLS;
+ * - #PSA_WANT_ECC_SECP_R1_256;
+ * - #PSA_WANT_ALG_ECDH and/or #PSA_WANT_ALG_ECDSA as needed;
+ * - #PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY, #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC,
+ * #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT,
+ * #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT and/or
+ * #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE as needed.
+ *
+ * \note To benefit from the smaller code size of p256-m, make sure that you
+ * do not enable any ECC-related option not supported by p256-m: this
+ * would cause the built-in ECC implementation to be built as well, in
+ * order to provide the required option.
+ * Make sure #PSA_WANT_ALG_DETERMINISTIC_ECDSA, #PSA_WANT_ALG_JPAKE and
+ * #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE, and curves other than
+ * SECP256R1 are disabled as they are not supported by this driver.
+ * Also, avoid defining #MBEDTLS_PK_PARSE_EC_COMPRESSED or
+ * #MBEDTLS_PK_PARSE_EC_EXTENDED as those currently require a subset of
+ * the built-in ECC implementation, see docs/driver-only-builds.md.
+ */
+//#define MBEDTLS_PSA_P256M_DRIVER_ENABLED
+
+/**
+ * \def MBEDTLS_PSA_INJECT_ENTROPY
+ *
+ * Enable support for entropy injection at first boot. This feature is
+ * required on systems that do not have a built-in entropy source (TRNG).
+ * This feature is currently not supported on systems that have a built-in
+ * entropy source.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_STORAGE_C, MBEDTLS_ENTROPY_NV_SEED
+ *
+ */
+//#define MBEDTLS_PSA_INJECT_ENTROPY
+
+/**
+ * \def MBEDTLS_RSA_NO_CRT
+ *
+ * Do not use the Chinese Remainder Theorem
+ * for the RSA private operation.
+ *
+ * Uncomment this macro to disable the use of CRT in RSA.
+ *
+ */
+//#define MBEDTLS_RSA_NO_CRT
+
+/**
+ * \def MBEDTLS_SELF_TEST
+ *
+ * Enable the checkup functions (*_self_test).
+ */
+#define MBEDTLS_SELF_TEST
+
+/**
+ * \def MBEDTLS_SHA256_SMALLER
+ *
+ * Enable an implementation of SHA-256 that has lower ROM footprint but also
+ * lower performance.
+ *
+ * The default implementation is meant to be a reasonable compromise between
+ * performance and size. This version optimizes more aggressively for size at
+ * the expense of performance. Eg on Cortex-M4 it reduces the size of
+ * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about
+ * 30%.
+ *
+ * Uncomment to enable the smaller implementation of SHA256.
+ */
+//#define MBEDTLS_SHA256_SMALLER
+
+/**
+ * \def MBEDTLS_SHA512_SMALLER
+ *
+ * Enable an implementation of SHA-512 that has lower ROM footprint but also
+ * lower performance.
+ *
+ * Uncomment to enable the smaller implementation of SHA512.
+ */
+//#define MBEDTLS_SHA512_SMALLER
+
+/**
+ * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
+ *
+ * Enable sending of alert messages in case of encountered errors as per RFC.
+ * If you choose not to send the alert messages, Mbed TLS can still communicate
+ * with other servers, only debugging of failures is harder.
+ *
+ * The advantage of not sending alert messages, is that no information is given
+ * about reasons for failures thus preventing adversaries of gaining intel.
+ *
+ * Enable sending of all alert messages
+ */
+#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CONNECTION_ID
+ *
+ * Enable support for the DTLS Connection ID (CID) extension,
+ * which allows to identify DTLS connections across changes
+ * in the underlying transport. The CID functionality is described
+ * in RFC 9146.
+ *
+ * Setting this option enables the SSL APIs `mbedtls_ssl_set_cid()`,
+ * mbedtls_ssl_get_own_cid()`, `mbedtls_ssl_get_peer_cid()` and
+ * `mbedtls_ssl_conf_cid()`. See the corresponding documentation for
+ * more information.
+ *
+ * The maximum lengths of outgoing and incoming CIDs can be configured
+ * through the options
+ * - MBEDTLS_SSL_CID_OUT_LEN_MAX
+ * - MBEDTLS_SSL_CID_IN_LEN_MAX.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Uncomment to enable the Connection ID extension.
+ */
+#define MBEDTLS_SSL_DTLS_CONNECTION_ID
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT
+ *
+ * Defines whether RFC 9146 (default) or the legacy version
+ * (version draft-ietf-tls-dtls-connection-id-05,
+ * https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05)
+ * is used.
+ *
+ * Set the value to 0 for the standard version, and
+ * 1 for the legacy draft version.
+ *
+ * \deprecated Support for the legacy version of the DTLS
+ * Connection ID feature is deprecated. Please
+ * switch to the standardized version defined
+ * in RFC 9146 enabled by utilizing
+ * MBEDTLS_SSL_DTLS_CONNECTION_ID without use
+ * of MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT.
+ *
+ * Requires: MBEDTLS_SSL_DTLS_CONNECTION_ID
+ */
+#define MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 0
+
+/**
+ * \def MBEDTLS_SSL_ASYNC_PRIVATE
+ *
+ * Enable asynchronous external private key operations in SSL. This allows
+ * you to configure an SSL connection to call an external cryptographic
+ * module to perform private key operations instead of performing the
+ * operation inside the library.
+ *
+ * Requires: MBEDTLS_X509_CRT_PARSE_C
+ */
+//#define MBEDTLS_SSL_ASYNC_PRIVATE
+
+/**
+ * \def MBEDTLS_SSL_CONTEXT_SERIALIZATION
+ *
+ * Enable serialization of the TLS context structures, through use of the
+ * functions mbedtls_ssl_context_save() and mbedtls_ssl_context_load().
+ *
+ * This pair of functions allows one side of a connection to serialize the
+ * context associated with the connection, then free or re-use that context
+ * while the serialized state is persisted elsewhere, and finally deserialize
+ * that state to a live context for resuming read/write operations on the
+ * connection. From a protocol perspective, the state of the connection is
+ * unaffected, in particular this is entirely transparent to the peer.
+ *
+ * Note: this is distinct from TLS session resumption, which is part of the
+ * protocol and fully visible by the peer. TLS session resumption enables
+ * establishing new connections associated to a saved session with shorter,
+ * lighter handshakes, while context serialization is a local optimization in
+ * handling a single, potentially long-lived connection.
+ *
+ * Enabling these APIs makes some SSL structures larger, as 64 extra bytes are
+ * saved after the handshake to allow for more efficient serialization, so if
+ * you don't need this feature you'll save RAM by disabling it.
+ *
+ * Requires: MBEDTLS_GCM_C or MBEDTLS_CCM_C or MBEDTLS_CHACHAPOLY_C
+ *
+ * Comment to disable the context serialization APIs.
+ */
+#define MBEDTLS_SSL_CONTEXT_SERIALIZATION
+
+/**
+ * \def MBEDTLS_SSL_DEBUG_ALL
+ *
+ * Enable the debug messages in SSL module for all issues.
+ * Debug messages have been disabled in some places to prevent timing
+ * attacks due to (unbalanced) debugging function calls.
+ *
+ * If you need all error reporting you should enable this during debugging,
+ * but remove this for production servers that should log as well.
+ *
+ * Uncomment this macro to report all debug messages on errors introducing
+ * a timing side-channel.
+ *
+ */
+//#define MBEDTLS_SSL_DEBUG_ALL
+
+/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
+ *
+ * Enable support for Encrypt-then-MAC, RFC 7366.
+ *
+ * This allows peers that both support it to use a more robust protection for
+ * ciphersuites using CBC, providing deep resistance against timing attacks
+ * on the padding or underlying cipher.
+ *
+ * This only affects CBC ciphersuites, and is useless if none is defined.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Encrypt-then-MAC
+ */
+#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
+
+/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+ *
+ * Enable support for RFC 7627: Session Hash and Extended Master Secret
+ * Extension.
+ *
+ * This was introduced as "the proper fix" to the Triple Handshake family of
+ * attacks, but it is recommended to always use it (even if you disable
+ * renegotiation), since it actually fixes a more fundamental issue in the
+ * original SSL/TLS design, and has implications beyond Triple Handshake.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for Extended Master Secret.
+ */
+#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
+
+/**
+ * \def MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+ *
+ * This option controls the availability of the API mbedtls_ssl_get_peer_cert()
+ * giving access to the peer's certificate after completion of the handshake.
+ *
+ * Unless you need mbedtls_ssl_peer_cert() in your application, it is
+ * recommended to disable this option for reduced RAM usage.
+ *
+ * \note If this option is disabled, mbedtls_ssl_get_peer_cert() is still
+ * defined, but always returns \c NULL.
+ *
+ * \note This option has no influence on the protection against the
+ * triple handshake attack. Even if it is disabled, Mbed TLS will
+ * still ensure that certificates do not change during renegotiation,
+ * for example by keeping a hash of the peer's certificate.
+ *
+ * \note This option is required if MBEDTLS_SSL_PROTO_TLS1_3 is set.
+ *
+ * Comment this macro to disable storing the peer's certificate
+ * after the handshake.
+ */
+#define MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+
+/**
+ * \def MBEDTLS_SSL_RENEGOTIATION
+ *
+ * Enable support for TLS renegotiation.
+ *
+ * The two main uses of renegotiation are (1) refresh keys on long-lived
+ * connections and (2) client authentication after the initial handshake.
+ * If you don't need renegotiation, it's probably better to disable it, since
+ * it has been associated with security issues in the past and is easy to
+ * misuse/misunderstand.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this to disable support for renegotiation.
+ *
+ * \note Even if this option is disabled, both client and server are aware
+ * of the Renegotiation Indication Extension (RFC 5746) used to
+ * prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
+ * (See \c mbedtls_ssl_conf_legacy_renegotiation for the
+ * configuration of this extension).
+ *
+ */
+#define MBEDTLS_SSL_RENEGOTIATION
+
+/**
+ * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ *
+ * Enable support for RFC 6066 max_fragment_length extension in SSL.
+ *
+ * Comment this macro to disable support for the max_fragment_length extension
+ */
+#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+
+/**
+ * \def MBEDTLS_SSL_RECORD_SIZE_LIMIT
+ *
+ * Enable support for RFC 8449 record_size_limit extension in SSL (TLS 1.3 only).
+ *
+ * \warning This extension is currently in development and must NOT be used except
+ * for testing purposes.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_3
+ *
+ * Uncomment this macro to enable support for the record_size_limit extension
+ */
+//#define MBEDTLS_SSL_RECORD_SIZE_LIMIT
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
+ *
+ * Requires: Without MBEDTLS_USE_PSA_CRYPTO: MBEDTLS_MD_C and
+ * (MBEDTLS_SHA256_C or MBEDTLS_SHA384_C or
+ * SHA-256 or SHA-512 provided by a PSA driver)
+ * With MBEDTLS_USE_PSA_CRYPTO:
+ * PSA_WANT_ALG_SHA_256 or PSA_WANT_ALG_SHA_384
+ *
+ * \warning If building with MBEDTLS_USE_PSA_CRYPTO, or if the hash(es) used
+ * are only provided by PSA drivers, you must call psa_crypto_init() before
+ * doing any TLS operations.
+ *
+ * Comment this macro to disable support for TLS 1.2 / DTLS 1.2
+ */
+#define MBEDTLS_SSL_PROTO_TLS1_2
+
+/**
+ * \def MBEDTLS_SSL_PROTO_TLS1_3
+ *
+ * Enable support for TLS 1.3.
+ *
+ * \note See docs/architecture/tls13-support.md for a description of the TLS
+ * 1.3 support that this option enables.
+ *
+ * Requires: MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ * \note TLS 1.3 uses PSA crypto for cryptographic operations that are
+ * directly performed by TLS 1.3 code. As a consequence, you must
+ * call psa_crypto_init() before the first TLS 1.3 handshake.
+ *
+ * \note Cryptographic operations performed indirectly via another module
+ * (X.509, PK) or by code shared with TLS 1.2 (record protection,
+ * running handshake hash) only use PSA crypto if
+ * #MBEDTLS_USE_PSA_CRYPTO is enabled.
+ *
+ * Uncomment this macro to enable the support for TLS 1.3.
+ */
+//#define MBEDTLS_SSL_PROTO_TLS1_3
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
+ *
+ * Enable TLS 1.3 middlebox compatibility mode.
+ *
+ * As specified in Section D.4 of RFC 8446, TLS 1.3 offers a compatibility
+ * mode to make a TLS 1.3 connection more likely to pass through middle boxes
+ * expecting TLS 1.2 traffic.
+ *
+ * Turning on the compatibility mode comes at the cost of a few added bytes
+ * on the wire, but it doesn't affect compatibility with TLS 1.3 implementations
+ * that don't use it. Therefore, unless transmission bandwidth is critical and
+ * you know that middlebox compatibility issues won't occur, it is therefore
+ * recommended to set this option.
+ *
+ * Comment to disable compatibility mode for TLS 1.3. If
+ * MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
+ * effect on the build.
+ *
+ */
+//#define MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+ *
+ * Enable TLS 1.3 PSK key exchange mode.
+ *
+ * Comment to disable support for the PSK key exchange mode in TLS 1.3. If
+ * MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
+ * effect on the build.
+ *
+ */
+#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+ *
+ * Enable TLS 1.3 ephemeral key exchange mode.
+ *
+ * Requires: PSA_WANT_ALG_ECDH or PSA_WANT_ALG_FFDH
+ * MBEDTLS_X509_CRT_PARSE_C
+ * and at least one of:
+ * MBEDTLS_ECDSA_C or (MBEDTLS_USE_PSA_CRYPTO and PSA_WANT_ALG_ECDSA)
+ * MBEDTLS_PKCS1_V21
+ *
+ * Comment to disable support for the ephemeral key exchange mode in TLS 1.3.
+ * If MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
+ * effect on the build.
+ *
+ */
+#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+ *
+ * Enable TLS 1.3 PSK ephemeral key exchange mode.
+ *
+ * Requires: PSA_WANT_ALG_ECDH or PSA_WANT_ALG_FFDH
+ *
+ * Comment to disable support for the PSK ephemeral key exchange mode in
+ * TLS 1.3. If MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not
+ * have any effect on the build.
+ *
+ */
+#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+
+/**
+ * \def MBEDTLS_SSL_EARLY_DATA
+ *
+ * Enable support for RFC 8446 TLS 1.3 early data.
+ *
+ * Requires: MBEDTLS_SSL_SESSION_TICKETS and either
+ * MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED or
+ * MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+ *
+ * Comment this to disable support for early data. If MBEDTLS_SSL_PROTO_TLS1_3
+ * is not enabled, this option does not have any effect on the build.
+ *
+ * This feature is experimental, not completed and thus not ready for
+ * production.
+ *
+ * \note The maximum amount of early data can be set with
+ * MBEDTLS_SSL_MAX_EARLY_DATA_SIZE.
+ *
+ */
+//#define MBEDTLS_SSL_EARLY_DATA
+
+/**
+ * \def MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Enable support for DTLS (all available versions).
+ *
+ * Enable this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_TLS1_2
+ *
+ * Comment this macro to disable support for DTLS
+ */
+#define MBEDTLS_SSL_PROTO_DTLS
+
+/**
+ * \def MBEDTLS_SSL_ALPN
+ *
+ * Enable support for RFC 7301 Application Layer Protocol Negotiation.
+ *
+ * Comment this macro to disable support for ALPN.
+ */
+#define MBEDTLS_SSL_ALPN
+
+/**
+ * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
+ *
+ * Enable support for the anti-replay mechanism in DTLS.
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ * MBEDTLS_SSL_PROTO_DTLS
+ *
+ * \warning Disabling this is often a security risk!
+ * See mbedtls_ssl_conf_dtls_anti_replay() for details.
+ *
+ * Comment this to disable anti-replay in DTLS.
+ */
+#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Enable support for HelloVerifyRequest on DTLS servers.
+ *
+ * This feature is highly recommended to prevent DTLS servers being used as
+ * amplifiers in DoS attacks against other hosts. It should always be enabled
+ * unless you know for sure amplification cannot be a problem in the
+ * environment in which your server operates.
+ *
+ * \warning Disabling this can be a security risk! (see above)
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Comment this to disable support for HelloVerifyRequest.
+ */
+#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
+
+/**
+ * \def MBEDTLS_SSL_DTLS_SRTP
+ *
+ * Enable support for negotiation of DTLS-SRTP (RFC 5764)
+ * through the use_srtp extension.
+ *
+ * \note This feature provides the minimum functionality required
+ * to negotiate the use of DTLS-SRTP and to allow the derivation of
+ * the associated SRTP packet protection key material.
+ * In particular, the SRTP packet protection itself, as well as the
+ * demultiplexing of RTP and DTLS packets at the datagram layer
+ * (see Section 5 of RFC 5764), are not handled by this feature.
+ * Instead, after successful completion of a handshake negotiating
+ * the use of DTLS-SRTP, the extended key exporter API
+ * mbedtls_ssl_conf_export_keys_cb() should be used to implement
+ * the key exporter described in Section 4.2 of RFC 5764 and RFC 5705
+ * (this is implemented in the SSL example programs).
+ * The resulting key should then be passed to an SRTP stack.
+ *
+ * Setting this option enables the runtime API
+ * mbedtls_ssl_conf_dtls_srtp_protection_profiles()
+ * through which the supported DTLS-SRTP protection
+ * profiles can be configured. You must call this API at
+ * runtime if you wish to negotiate the use of DTLS-SRTP.
+ *
+ * Requires: MBEDTLS_SSL_PROTO_DTLS
+ *
+ * Uncomment this to enable support for use_srtp extension.
+ */
+//#define MBEDTLS_SSL_DTLS_SRTP
+
+/**
+ * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+ *
+ * Enable server-side support for clients that reconnect from the same port.
+ *
+ * Some clients unexpectedly close the connection and try to reconnect using the
+ * same source port. This needs special support from the server to handle the
+ * new connection securely, as described in section 4.2.8 of RFC 6347. This
+ * flag enables that support.
+ *
+ * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
+ *
+ * Comment this to disable support for clients reusing the source port.
+ */
+#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
+
+/**
+ * \def MBEDTLS_SSL_SESSION_TICKETS
+ *
+ * Enable support for RFC 5077 session tickets in SSL.
+ * Client-side, provides full support for session tickets (maintenance of a
+ * session store remains the responsibility of the application, though).
+ * Server-side, you also need to provide callbacks for writing and parsing
+ * tickets, including authenticated encryption and key management. Example
+ * callbacks are provided by MBEDTLS_SSL_TICKET_C.
+ *
+ * Comment this macro to disable support for SSL session tickets
+ */
+#define MBEDTLS_SSL_SESSION_TICKETS
+
+/**
+ * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
+ *
+ * Enable support for RFC 6066 server name indication (SNI) in SSL.
+ *
+ * Requires: MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Comment this macro to disable support for server name indication in SSL
+ */
+#define MBEDTLS_SSL_SERVER_NAME_INDICATION
+
+/**
+ * \def MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+ *
+ * When this option is enabled, the SSL buffer will be resized automatically
+ * based on the negotiated maximum fragment length in each direction.
+ *
+ * Requires: MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+ */
+//#define MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+
+/**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * clang's MemorySanitizer. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires compiling with clang -fsanitize=memory. The test
+ * suites can then be run normally.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+
+/**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * valgrind's memcheck tool. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires valgrind headers for building, and is only useful for
+ * testing if the tests suites are run with valgrind's memcheck. This can be
+ * done for an individual test suite with 'valgrind ./test_suite_xxx', or when
+ * using CMake, this can be done for all test suites with 'make memcheck'.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+
+/**
+ * \def MBEDTLS_TEST_HOOKS
+ *
+ * Enable features for invasive testing such as introspection functions and
+ * hooks for fault injection. This enables additional unit tests.
+ *
+ * Merely enabling this feature should not change the behavior of the product.
+ * It only adds new code, and new branching points where the default behavior
+ * is the same as when this feature is disabled.
+ * However, this feature increases the attack surface: there is an added
+ * risk of vulnerabilities, and more gadgets that can make exploits easier.
+ * Therefore this feature must never be enabled in production.
+ *
+ * See `docs/architecture/testing/mbed-crypto-invasive-testing.md` for more
+ * information.
+ *
+ * Uncomment to enable invasive tests.
+ */
+//#define MBEDTLS_TEST_HOOKS
+
+/**
+ * \def MBEDTLS_THREADING_ALT
+ *
+ * Provide your own alternate threading implementation.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to allow your own alternate threading implementation.
+ */
+//#define MBEDTLS_THREADING_ALT
+
+/**
+ * \def MBEDTLS_THREADING_PTHREAD
+ *
+ * Enable the pthread wrapper layer for the threading layer.
+ *
+ * Requires: MBEDTLS_THREADING_C
+ *
+ * Uncomment this to enable pthread mutexes.
+ */
+//#define MBEDTLS_THREADING_PTHREAD
+
+/**
+ * \def MBEDTLS_USE_PSA_CRYPTO
+ *
+ * Make the X.509 and TLS libraries use PSA for cryptographic operations as
+ * much as possible, and enable new APIs for using keys handled by PSA Crypto.
+ *
+ * \note Development of this option is currently in progress, and parts of Mbed
+ * TLS's X.509 and TLS modules are not ported to PSA yet. However, these parts
+ * will still continue to work as usual, so enabling this option should not
+ * break backwards compatibility.
+ *
+ * \warning If you enable this option, you need to call `psa_crypto_init()`
+ * before calling any function from the SSL/TLS, X.509 or PK modules, except
+ * for the various mbedtls_xxx_init() functions which can be called at any time.
+ *
+ * \note An important and desirable effect of this option is that it allows
+ * PK, X.509 and TLS to take advantage of PSA drivers. For example, enabling
+ * this option is what allows use of drivers for ECDSA, ECDH and EC J-PAKE in
+ * those modules. However, note that even with this option disabled, some code
+ * in PK, X.509, TLS or the crypto library might still use PSA drivers, if it
+ * can determine it's safe to do so; currently that's the case for hashes.
+ *
+ * \note See docs/use-psa-crypto.md for a complete description this option.
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C.
+ *
+ * Uncomment this to enable internal use of PSA Crypto and new associated APIs.
+ */
+//#define MBEDTLS_USE_PSA_CRYPTO
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_CONFIG
+ *
+ * This setting allows support for cryptographic mechanisms through the PSA
+ * API to be configured separately from support through the mbedtls API.
+ *
+ * When this option is disabled, the PSA API exposes the cryptographic
+ * mechanisms that can be implemented on top of the `mbedtls_xxx` API
+ * configured with `MBEDTLS_XXX` symbols.
+ *
+ * When this option is enabled, the PSA API exposes the cryptographic
+ * mechanisms requested by the `PSA_WANT_XXX` symbols defined in
+ * include/psa/crypto_config.h. The corresponding `MBEDTLS_XXX` settings are
+ * automatically enabled if required (i.e. if no PSA driver provides the
+ * mechanism). You may still freely enable additional `MBEDTLS_XXX` symbols
+ * in mbedtls_config.h.
+ *
+ * If the symbol #MBEDTLS_PSA_CRYPTO_CONFIG_FILE is defined, it specifies
+ * an alternative header to include instead of include/psa/crypto_config.h.
+ *
+ * \warning This option is experimental, in that the set of `PSA_WANT_XXX`
+ * symbols is not completely finalized yet, and the configuration
+ * tooling is not ideally adapted to having two separate configuration
+ * files.
+ * Future minor releases of Mbed TLS may make minor changes to those
+ * symbols, but we will endeavor to provide a transition path.
+ * Nonetheless, this option is considered mature enough to use in
+ * production, as long as you accept that you may need to make
+ * minor changes to psa/crypto_config.h when upgrading Mbed TLS.
+ */
+//#define MBEDTLS_PSA_CRYPTO_CONFIG
+
+/**
+ * \def MBEDTLS_VERSION_FEATURES
+ *
+ * Allow run-time checking of compile-time enabled features. Thus allowing users
+ * to check at run-time if the library is for instance compiled with threading
+ * support via mbedtls_version_check_feature().
+ *
+ * Requires: MBEDTLS_VERSION_C
+ *
+ * Comment this to disable run-time checking and save ROM space
+ */
+#define MBEDTLS_VERSION_FEATURES
+
+/**
+ * \def MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+ *
+ * If set, this enables the X.509 API `mbedtls_x509_crt_verify_with_ca_cb()`
+ * and the SSL API `mbedtls_ssl_conf_ca_cb()` which allow users to configure
+ * the set of trusted certificates through a callback instead of a linked
+ * list.
+ *
+ * This is useful for example in environments where a large number of trusted
+ * certificates is present and storing them in a linked list isn't efficient
+ * enough, or when the set of trusted certificates changes frequently.
+ *
+ * See the documentation of `mbedtls_x509_crt_verify_with_ca_cb()` and
+ * `mbedtls_ssl_conf_ca_cb()` for more information.
+ *
+ * Requires: MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Uncomment to enable trusted certificate callbacks.
+ */
+//#define MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+
+/**
+ * \def MBEDTLS_X509_REMOVE_INFO
+ *
+ * Disable mbedtls_x509_*_info() and related APIs.
+ *
+ * Uncomment to omit mbedtls_x509_*_info(), as well as mbedtls_debug_print_crt()
+ * and other functions/constants only used by these functions, thus reducing
+ * the code footprint by several KB.
+ */
+//#define MBEDTLS_X509_REMOVE_INFO
+
+/**
+ * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
+ *
+ * Enable parsing and verification of X.509 certificates, CRLs and CSRS
+ * signed with RSASSA-PSS (aka PKCS#1 v2.1).
+ *
+ * Comment this macro to disallow using RSASSA-PSS in certificates.
+ */
+#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
+/** \} name SECTION: Mbed TLS feature support */
+
+/**
+ * \name SECTION: Mbed TLS modules
+ *
+ * This section enables or disables entire modules in Mbed TLS
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_AESNI_C
+ *
+ * Enable AES-NI support on x86-64 or x86-32.
+ *
+ * \note AESNI is only supported with certain compilers and target options:
+ * - Visual Studio 2013: supported.
+ * - GCC, x86-64, target not explicitly supporting AESNI:
+ * requires MBEDTLS_HAVE_ASM.
+ * - GCC, x86-32, target not explicitly supporting AESNI:
+ * not supported.
+ * - GCC, x86-64 or x86-32, target supporting AESNI: supported.
+ * For this assembly-less implementation, you must currently compile
+ * `library/aesni.c` and `library/aes.c` with machine options to enable
+ * SSE2 and AESNI instructions: `gcc -msse2 -maes -mpclmul` or
+ * `clang -maes -mpclmul`.
+ * - Non-x86 targets: this option is silently ignored.
+ * - Other compilers: this option is silently ignored.
+ *
+ * \note
+ * Above, "GCC" includes compatible compilers such as Clang.
+ * The limitations on target support are likely to be relaxed in the future.
+ *
+ * Module: library/aesni.c
+ * Caller: library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM (on some platforms, see note)
+ *
+ * This modules adds support for the AES-NI instructions on x86.
+ */
+#define MBEDTLS_AESNI_C
+
+/**
+ * \def MBEDTLS_AESCE_C
+ *
+ * Enable AES cryptographic extension support on 64-bit Arm.
+ *
+ * Module: library/aesce.c
+ * Caller: library/aes.c
+ *
+ * Requires: MBEDTLS_AES_C
+ *
+ * \warning Runtime detection only works on Linux. For non-Linux operating
+ * system, Armv8-A Cryptographic Extensions must be supported by
+ * the CPU when this option is enabled.
+ *
+ * \note Minimum compiler versions for this feature are Clang 4.0,
+ * armclang 6.6, GCC 6.0 or MSVC 2019 version 16.11.2.
+ *
+ * \note \c CFLAGS must be set to a minimum of \c -march=armv8-a+crypto for
+ * armclang <= 6.9
+ *
+ * This module adds support for the AES Armv8-A Cryptographic Extensions on Aarch64 systems.
+ */
+//#define MBEDTLS_AESCE_C
+
+/**
+ * \def MBEDTLS_AES_C
+ *
+ * Enable the AES block cipher.
+ *
+ * Module: library/aes.c
+ * Caller: library/cipher.c
+ * library/pem.c
+ * library/ctr_drbg.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
+ * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
+ * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
+ * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
+ * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
+ * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
+ *
+ * PEM_PARSE uses AES for decrypting encrypted keys.
+ */
+#define MBEDTLS_AES_C
+
+/**
+ * \def MBEDTLS_ASN1_PARSE_C
+ *
+ * Enable the generic ASN1 parser.
+ *
+ * Module: library/asn1.c
+ * Caller: library/x509.c
+ * library/dhm.c
+ * library/pkcs12.c
+ * library/pkcs5.c
+ * library/pkparse.c
+ */
+#define MBEDTLS_ASN1_PARSE_C
+
+/**
+ * \def MBEDTLS_ASN1_WRITE_C
+ *
+ * Enable the generic ASN1 writer.
+ *
+ * Module: library/asn1write.c
+ * Caller: library/ecdsa.c
+ * library/pkwrite.c
+ * library/x509_create.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ */
+#define MBEDTLS_ASN1_WRITE_C
+
+/**
+ * \def MBEDTLS_BASE64_C
+ *
+ * Enable the Base64 module.
+ *
+ * Module: library/base64.c
+ * Caller: library/pem.c
+ *
+ * This module is required for PEM support (required by X.509).
+ */
+#define MBEDTLS_BASE64_C
+
+/**
+ * \def MBEDTLS_BIGNUM_C
+ *
+ * Enable the multi-precision integer library.
+ *
+ * Module: library/bignum.c
+ * library/bignum_core.c
+ * library/bignum_mod.c
+ * library/bignum_mod_raw.c
+ * Caller: library/dhm.c
+ * library/ecp.c
+ * library/ecdsa.c
+ * library/rsa.c
+ * library/rsa_alt_helpers.c
+ * library/ssl_tls.c
+ *
+ * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
+ */
+#define MBEDTLS_BIGNUM_C
+
+/**
+ * \def MBEDTLS_CAMELLIA_C
+ *
+ * Enable the Camellia block cipher.
+ *
+ * Module: library/camellia.c
+ * Caller: library/cipher.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define MBEDTLS_CAMELLIA_C
+
+/**
+ * \def MBEDTLS_ARIA_C
+ *
+ * Enable the ARIA block cipher.
+ *
+ * Module: library/aria.c
+ * Caller: library/cipher.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ *
+ * MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384
+ * MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256
+ * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256
+ * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384
+ */
+#define MBEDTLS_ARIA_C
+
+/**
+ * \def MBEDTLS_CCM_C
+ *
+ * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
+ *
+ * Module: library/ccm.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or
+ * MBEDTLS_ARIA_C
+ *
+ * This module enables the AES-CCM ciphersuites, if other requisites are
+ * enabled as well.
+ */
+#define MBEDTLS_CCM_C
+
+/**
+ * \def MBEDTLS_CHACHA20_C
+ *
+ * Enable the ChaCha20 stream cipher.
+ *
+ * Module: library/chacha20.c
+ */
+#define MBEDTLS_CHACHA20_C
+
+/**
+ * \def MBEDTLS_CHACHAPOLY_C
+ *
+ * Enable the ChaCha20-Poly1305 AEAD algorithm.
+ *
+ * Module: library/chachapoly.c
+ *
+ * This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C
+ */
+#define MBEDTLS_CHACHAPOLY_C
+
+/**
+ * \def MBEDTLS_CIPHER_C
+ *
+ * Enable the generic cipher layer.
+ *
+ * Module: library/cipher.c
+ * Caller: library/ccm.c
+ * library/cmac.c
+ * library/gcm.c
+ * library/nist_kw.c
+ * library/pkcs12.c
+ * library/pkcs5.c
+ * library/psa_crypto_aead.c
+ * library/psa_crypto_mac.c
+ * library/ssl_ciphersuites.c
+ * library/ssl_msg.c
+ * library/ssl_ticket.c (unless MBEDTLS_USE_PSA_CRYPTO is enabled)
+ *
+ * Uncomment to enable generic cipher wrappers.
+ */
+#define MBEDTLS_CIPHER_C
+
+/**
+ * \def MBEDTLS_CMAC_C
+ *
+ * Enable the CMAC (Cipher-based Message Authentication Code) mode for block
+ * ciphers.
+ *
+ * \note When #MBEDTLS_CMAC_ALT is active, meaning that the underlying
+ * implementation of the CMAC algorithm is provided by an alternate
+ * implementation, that alternate implementation may opt to not support
+ * AES-192 or 3DES as underlying block ciphers for the CMAC operation.
+ *
+ * Module: library/cmac.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_DES_C
+ *
+ */
+#define MBEDTLS_CMAC_C
+
+/**
+ * \def MBEDTLS_CTR_DRBG_C
+ *
+ * Enable the CTR_DRBG AES-based random generator.
+ * The CTR_DRBG generator uses AES-256 by default.
+ * To use AES-128 instead, enable \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY above.
+ *
+ * \note AES-128 will be used if \c MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH is set.
+ *
+ * \note To achieve a 256-bit security strength with CTR_DRBG,
+ * you must use AES-256 *and* use sufficient entropy.
+ * See ctr_drbg.h for more details.
+ *
+ * Module: library/ctr_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_AES_C
+ *
+ * This module provides the CTR_DRBG AES random number generator.
+ */
+#define MBEDTLS_CTR_DRBG_C
+
+/**
+ * \def MBEDTLS_DEBUG_C
+ *
+ * Enable the debug functions.
+ *
+ * Module: library/debug.c
+ * Caller: library/ssl_msg.c
+ * library/ssl_tls.c
+ * library/ssl_tls12_*.c
+ * library/ssl_tls13_*.c
+ *
+ * This module provides debugging functions.
+ */
+#define MBEDTLS_DEBUG_C
+
+/**
+ * \def MBEDTLS_DES_C
+ *
+ * Enable the DES block cipher.
+ *
+ * Module: library/des.c
+ * Caller: library/pem.c
+ * library/cipher.c
+ *
+ * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
+ *
+ * \warning DES/3DES are considered weak ciphers and their use constitutes a
+ * security risk. We recommend considering stronger ciphers instead.
+ */
+#define MBEDTLS_DES_C
+
+/**
+ * \def MBEDTLS_DHM_C
+ *
+ * Enable the Diffie-Hellman-Merkle module.
+ *
+ * Module: library/dhm.c
+ * Caller: library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * This module is used by the following key exchanges:
+ * DHE-RSA, DHE-PSK
+ *
+ * \warning Using DHE constitutes a security risk as it
+ * is not possible to validate custom DH parameters.
+ * If possible, it is recommended users should consider
+ * preferring other methods of key exchange.
+ * See dhm.h for more details.
+ *
+ */
+#define MBEDTLS_DHM_C
+
+/**
+ * \def MBEDTLS_ECDH_C
+ *
+ * Enable the elliptic curve Diffie-Hellman library.
+ *
+ * Module: library/ecdh.c
+ * Caller: library/psa_crypto.c
+ * library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * This module is used by the following key exchanges:
+ * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
+ *
+ * Requires: MBEDTLS_ECP_C
+ */
+#define MBEDTLS_ECDH_C
+
+/**
+ * \def MBEDTLS_ECDSA_C
+ *
+ * Enable the elliptic curve DSA library.
+ *
+ * Module: library/ecdsa.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ * ECDHE-ECDSA
+ *
+ * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C,
+ * and at least one MBEDTLS_ECP_DP_XXX_ENABLED for a
+ * short Weierstrass curve.
+ */
+#define MBEDTLS_ECDSA_C
+
+/**
+ * \def MBEDTLS_ECJPAKE_C
+ *
+ * Enable the elliptic curve J-PAKE library.
+ *
+ * \note EC J-PAKE support is based on the Thread v1.0.0 specification.
+ * It has not been reviewed for compliance with newer standards such as
+ * Thread v1.1 or RFC 8236.
+ *
+ * Module: library/ecjpake.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ * ECJPAKE
+ *
+ * Requires: MBEDTLS_ECP_C and either MBEDTLS_MD_C or MBEDTLS_PSA_CRYPTO_C
+ *
+ * \warning If using a hash that is only provided by PSA drivers, you must
+ * call psa_crypto_init() before doing any EC J-PAKE operations.
+ */
+#define MBEDTLS_ECJPAKE_C
+
+/**
+ * \def MBEDTLS_ECP_C
+ *
+ * Enable the elliptic curve over GF(p) library.
+ *
+ * Module: library/ecp.c
+ * Caller: library/ecdh.c
+ * library/ecdsa.c
+ * library/ecjpake.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
+ */
+#define MBEDTLS_ECP_C
+
+/**
+ * \def MBEDTLS_ENTROPY_C
+ *
+ * Enable the platform-specific entropy code.
+ *
+ * Module: library/entropy.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
+ *
+ * This module provides a generic entropy pool
+ */
+//#define MBEDTLS_ENTROPY_C
+
+/**
+ * \def MBEDTLS_ERROR_C
+ *
+ * Enable error code to error string conversion.
+ *
+ * Module: library/error.c
+ * Caller:
+ *
+ * This module enables mbedtls_strerror().
+ */
+//#define MBEDTLS_ERROR_C
+
+/**
+ * \def MBEDTLS_GCM_C
+ *
+ * Enable the Galois/Counter Mode (GCM).
+ *
+ * Module: library/gcm.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or
+ * MBEDTLS_ARIA_C
+ *
+ * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
+ * requisites are enabled as well.
+ */
+#define MBEDTLS_GCM_C
+
+/**
+ * \def MBEDTLS_HKDF_C
+ *
+ * Enable the HKDF algorithm (RFC 5869).
+ *
+ * Module: library/hkdf.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * This module adds support for the Hashed Message Authentication Code
+ * (HMAC)-based key derivation function (HKDF).
+ */
+#define MBEDTLS_HKDF_C
+
+/**
+ * \def MBEDTLS_HMAC_DRBG_C
+ *
+ * Enable the HMAC_DRBG random generator.
+ *
+ * Module: library/hmac_drbg.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_MD_C
+ *
+ * Uncomment to enable the HMAC_DRBG random number generator.
+ */
+#define MBEDTLS_HMAC_DRBG_C
+
+/**
+ * \def MBEDTLS_LMS_C
+ *
+ * Enable the LMS stateful-hash asymmetric signature algorithm.
+ *
+ * Module: library/lms.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C
+ *
+ * Uncomment to enable the LMS verification algorithm and public key operations.
+ */
+//#define MBEDTLS_LMS_C
+
+/**
+ * \def MBEDTLS_LMS_PRIVATE
+ *
+ * Enable LMS private-key operations and signing code. Functions enabled by this
+ * option are experimental, and should not be used in production.
+ *
+ * Requires: MBEDTLS_LMS_C
+ *
+ * Uncomment to enable the LMS signature algorithm and private key operations.
+ */
+//#define MBEDTLS_LMS_PRIVATE
+
+/**
+ * \def MBEDTLS_NIST_KW_C
+ *
+ * Enable the Key Wrapping mode for 128-bit block ciphers,
+ * as defined in NIST SP 800-38F. Only KW and KWP modes
+ * are supported. At the moment, only AES is approved by NIST.
+ *
+ * Module: library/nist_kw.c
+ *
+ * Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C
+ */
+#define MBEDTLS_NIST_KW_C
+
+/**
+ * \def MBEDTLS_MD_C
+ *
+ * Enable the generic layer for message digest (hashing) and HMAC.
+ *
+ * Requires: one of: MBEDTLS_MD5_C, MBEDTLS_RIPEMD160_C, MBEDTLS_SHA1_C,
+ * MBEDTLS_SHA224_C, MBEDTLS_SHA256_C, MBEDTLS_SHA384_C,
+ * MBEDTLS_SHA512_C, or MBEDTLS_PSA_CRYPTO_C with at least
+ * one hash.
+ * Module: library/md.c
+ * Caller: library/constant_time.c
+ * library/ecdsa.c
+ * library/ecjpake.c
+ * library/hkdf.c
+ * library/hmac_drbg.c
+ * library/pk.c
+ * library/pkcs5.c
+ * library/pkcs12.c
+ * library/psa_crypto_ecp.c
+ * library/psa_crypto_rsa.c
+ * library/rsa.c
+ * library/ssl_cookie.c
+ * library/ssl_msg.c
+ * library/ssl_tls.c
+ * library/x509.c
+ * library/x509_crt.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ *
+ * Uncomment to enable generic message digest wrappers.
+ */
+//#define MBEDTLS_MD_C
+
+/**
+ * \def MBEDTLS_MD5_C
+ *
+ * Enable the MD5 hash algorithm.
+ *
+ * Module: library/md5.c
+ * Caller: library/md.c
+ * library/pem.c
+ * library/ssl_tls.c
+ *
+ * This module is required for TLS 1.2 depending on the handshake parameters.
+ * Further, it is used for checking MD5-signed certificates, and for PBKDF1
+ * when decrypting PEM-encoded encrypted keys.
+ *
+ * \warning MD5 is considered a weak message digest and its use constitutes a
+ * security risk. If possible, we recommend avoiding dependencies on
+ * it, and considering stronger message digests instead.
+ *
+ */
+#if CONFIG_IS_ENABLED(MD5)
+#define MBEDTLS_MD5_C
+#endif
+
+/**
+ * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C
+ *
+ * Enable the buffer allocator implementation that makes use of a (stack)
+ * based buffer to 'allocate' dynamic memory. (replaces calloc() and free()
+ * calls)
+ *
+ * Module: library/memory_buffer_alloc.c
+ *
+ * Requires: MBEDTLS_PLATFORM_C
+ * MBEDTLS_PLATFORM_MEMORY (to use it within Mbed TLS)
+ *
+ * Enable this module to enable the buffer memory allocator.
+ */
+//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C
+
+/**
+ * \def MBEDTLS_NET_C
+ *
+ * Enable the TCP and UDP over IPv6/IPv4 networking routines.
+ *
+ * \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
+ * and Windows. For other platforms, you'll want to disable it, and write your
+ * own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://mbed-tls.readthedocs.io/en/latest/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module: library/net_sockets.c
+ *
+ * This module provides networking routines.
+ */
+//#define MBEDTLS_NET_C
+
+/**
+ * \def MBEDTLS_OID_C
+ *
+ * Enable the OID database.
+ *
+ * Module: library/oid.c
+ * Caller: library/asn1write.c
+ * library/pkcs5.c
+ * library/pkparse.c
+ * library/pkwrite.c
+ * library/rsa.c
+ * library/x509.c
+ * library/x509_create.c
+ * library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ *
+ * This modules translates between OIDs and internal values.
+ */
+#define MBEDTLS_OID_C
+
+/**
+ * \def MBEDTLS_PADLOCK_C
+ *
+ * Enable VIA Padlock support on x86.
+ *
+ * Module: library/padlock.c
+ * Caller: library/aes.c
+ *
+ * Requires: MBEDTLS_HAVE_ASM
+ *
+ * This modules adds support for the VIA PadLock on x86.
+ */
+#define MBEDTLS_PADLOCK_C
+
+/**
+ * \def MBEDTLS_PEM_PARSE_C
+ *
+ * Enable PEM decoding / parsing.
+ *
+ * Module: library/pem.c
+ * Caller: library/dhm.c
+ * library/pkparse.c
+ * library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ * optionally MBEDTLS_MD5_C, or PSA Crypto with MD5 (see below)
+ *
+ * \warning When parsing password-protected files, if MD5 is provided only by
+ * a PSA driver, you must call psa_crypto_init() before the first file.
+ *
+ * This modules adds support for decoding / parsing PEM files.
+ */
+#define MBEDTLS_PEM_PARSE_C
+
+/**
+ * \def MBEDTLS_PEM_WRITE_C
+ *
+ * Enable PEM encoding / writing.
+ *
+ * Module: library/pem.c
+ * Caller: library/pkwrite.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ *
+ * Requires: MBEDTLS_BASE64_C
+ *
+ * This modules adds support for encoding / writing PEM files.
+ */
+#define MBEDTLS_PEM_WRITE_C
+
+/**
+ * \def MBEDTLS_PK_C
+ *
+ * Enable the generic public (asymmetric) key layer.
+ *
+ * Module: library/pk.c
+ * Caller: library/psa_crypto_rsa.c
+ * library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ * library/x509.c
+ *
+ * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C or MBEDTLS_ECP_C
+ *
+ * Uncomment to enable generic public key wrappers.
+ */
+#define MBEDTLS_PK_C
+
+/**
+ * \def MBEDTLS_PK_PARSE_C
+ *
+ * Enable the generic public (asymmetric) key parser.
+ *
+ * Module: library/pkparse.c
+ * Caller: library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key parse functions.
+ */
+#define MBEDTLS_PK_PARSE_C
+
+/**
+ * \def MBEDTLS_PK_WRITE_C
+ *
+ * Enable the generic public (asymmetric) key writer.
+ *
+ * Module: library/pkwrite.c
+ * Caller: library/x509write.c
+ *
+ * Requires: MBEDTLS_PK_C
+ *
+ * Uncomment to enable generic public key write functions.
+ */
+#define MBEDTLS_PK_WRITE_C
+
+/**
+ * \def MBEDTLS_PKCS5_C
+ *
+ * Enable PKCS#5 functions.
+ *
+ * Module: library/pkcs5.c
+ *
+ * Requires: MBEDTLS_CIPHER_C
+ * Auto-enables: MBEDTLS_MD_C
+ *
+ * \warning If using a hash that is only provided by PSA drivers, you must
+ * call psa_crypto_init() before doing any PKCS5 operations.
+ *
+ * This module adds support for the PKCS#5 functions.
+ */
+#define MBEDTLS_PKCS5_C
+
+/**
+ * \def MBEDTLS_PKCS7_C
+ *
+ * Enable PKCS #7 core for using PKCS #7-formatted signatures.
+ * RFC Link - https://tools.ietf.org/html/rfc2315
+ *
+ * Module: library/pkcs7.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_OID_C, MBEDTLS_PK_PARSE_C,
+ * MBEDTLS_X509_CRT_PARSE_C MBEDTLS_X509_CRL_PARSE_C,
+ * MBEDTLS_BIGNUM_C, MBEDTLS_MD_C
+ *
+ * This module is required for the PKCS #7 parsing modules.
+ */
+#define MBEDTLS_PKCS7_C
+
+/**
+ * \def MBEDTLS_PKCS12_C
+ *
+ * Enable PKCS#12 PBE functions.
+ * Adds algorithms for parsing PKCS#8 encrypted private keys
+ *
+ * Module: library/pkcs12.c
+ * Caller: library/pkparse.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C and either
+ * MBEDTLS_MD_C or MBEDTLS_PSA_CRYPTO_C.
+ *
+ * \warning If using a hash that is only provided by PSA drivers, you must
+ * call psa_crypto_init() before doing any PKCS12 operations.
+ *
+ * This module enables PKCS#12 functions.
+ */
+#define MBEDTLS_PKCS12_C
+
+/**
+ * \def MBEDTLS_PLATFORM_C
+ *
+ * Enable the platform abstraction layer that allows you to re-assign
+ * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
+ *
+ * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
+ * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
+ * above to be specified at runtime or compile time respectively.
+ *
+ * \note This abstraction layer must be enabled on Windows (including MSYS2)
+ * as other modules rely on it for a fixed snprintf implementation.
+ *
+ * Module: library/platform.c
+ * Caller: Most other .c files
+ *
+ * This module enables abstraction of common (libc) functions.
+ */
+#define MBEDTLS_PLATFORM_C
+
+/**
+ * \def MBEDTLS_POLY1305_C
+ *
+ * Enable the Poly1305 MAC algorithm.
+ *
+ * Module: library/poly1305.c
+ * Caller: library/chachapoly.c
+ */
+#define MBEDTLS_POLY1305_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_C
+ *
+ * Enable the Platform Security Architecture cryptography API.
+ *
+ * Module: library/psa_crypto.c
+ *
+ * Requires: MBEDTLS_CIPHER_C,
+ * either MBEDTLS_CTR_DRBG_C and MBEDTLS_ENTROPY_C,
+ * or MBEDTLS_HMAC_DRBG_C and MBEDTLS_ENTROPY_C,
+ * or MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
+ *
+ */
+//#define MBEDTLS_PSA_CRYPTO_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_SE_C
+ *
+ * Enable dynamic secure element support in the Platform Security Architecture
+ * cryptography API.
+ *
+ * \deprecated This feature is deprecated. Please switch to the PSA driver
+ * interface.
+ *
+ * Module: library/psa_crypto_se.c
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_PSA_CRYPTO_STORAGE_C
+ *
+ */
+//#define MBEDTLS_PSA_CRYPTO_SE_C
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_STORAGE_C
+ *
+ * Enable the Platform Security Architecture persistent key storage.
+ *
+ * Module: library/psa_crypto_storage.c
+ *
+ * Requires: MBEDTLS_PSA_CRYPTO_C,
+ * either MBEDTLS_PSA_ITS_FILE_C or a native implementation of
+ * the PSA ITS interface
+ */
+//#define MBEDTLS_PSA_CRYPTO_STORAGE_C
+
+/**
+ * \def MBEDTLS_PSA_ITS_FILE_C
+ *
+ * Enable the emulation of the Platform Security Architecture
+ * Internal Trusted Storage (PSA ITS) over files.
+ *
+ * Module: library/psa_its_file.c
+ *
+ * Requires: MBEDTLS_FS_IO
+ */
+//#define MBEDTLS_PSA_ITS_FILE_C
+
+/**
+ * \def MBEDTLS_RIPEMD160_C
+ *
+ * Enable the RIPEMD-160 hash algorithm.
+ *
+ * Module: library/ripemd160.c
+ * Caller: library/md.c
+ *
+ */
+#define MBEDTLS_RIPEMD160_C
+
+/**
+ * \def MBEDTLS_RSA_C
+ *
+ * Enable the RSA public-key cryptosystem.
+ *
+ * Module: library/rsa.c
+ * library/rsa_alt_helpers.c
+ * Caller: library/pk.c
+ * library/psa_crypto.c
+ * library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * This module is used by the following key exchanges:
+ * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
+ */
+#define MBEDTLS_RSA_C
+
+/**
+ * \def MBEDTLS_SHA1_C
+ *
+ * Enable the SHA1 cryptographic hash algorithm.
+ *
+ * Module: library/sha1.c
+ * Caller: library/md.c
+ * library/psa_crypto_hash.c
+ *
+ * This module is required for TLS 1.2 depending on the handshake parameters,
+ * and for SHA1-signed certificates.
+ *
+ * \warning SHA-1 is considered a weak message digest and its use constitutes
+ * a security risk. If possible, we recommend avoiding dependencies
+ * on it, and considering stronger message digests instead.
+ *
+ */
+#if CONFIG_IS_ENABLED(SHA1)
+#define MBEDTLS_SHA1_C
+#endif
+
+/**
+ * \def MBEDTLS_SHA224_C
+ *
+ * Enable the SHA-224 cryptographic hash algorithm.
+ *
+ * Module: library/sha256.c
+ * Caller: library/md.c
+ * library/ssl_cookie.c
+ *
+ * This module adds support for SHA-224.
+ */
+//#define MBEDTLS_SHA224_C
+
+/**
+ * \def MBEDTLS_SHA256_C
+ *
+ * Enable the SHA-256 cryptographic hash algorithm.
+ *
+ * Module: library/sha256.c
+ * Caller: library/entropy.c
+ * library/md.c
+ * library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * This module adds support for SHA-256.
+ * This module is required for the SSL/TLS 1.2 PRF function.
+ */
+#if CONFIG_IS_ENABLED(SHA256)
+#define MBEDTLS_SHA256_C
+#endif
+
+/**
+ * \def MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+ *
+ * Enable acceleration of the SHA-256 and SHA-224 cryptographic hash algorithms
+ * with the ARMv8 cryptographic extensions if they are available at runtime.
+ * If not, the library will fall back to the C implementation.
+ *
+ * \note If MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT is defined when building
+ * for a non-Aarch64 build it will be silently ignored.
+ *
+ * \note Minimum compiler versions for this feature are Clang 4.0,
+ * armclang 6.6 or GCC 6.0.
+ *
+ * \note \c CFLAGS must be set to a minimum of \c -march=armv8-a+crypto for
+ * armclang <= 6.9
+ *
+ * \warning MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT cannot be defined at the
+ * same time as MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY.
+ *
+ * Requires: MBEDTLS_SHA256_C.
+ *
+ * Module: library/sha256.c
+ *
+ * Uncomment to have the library check for the A64 SHA-256 crypto extensions
+ * and use them if available.
+ */
+//#define MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+
+/**
+ * \def MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
+ *
+ * Enable acceleration of the SHA-256 and SHA-224 cryptographic hash algorithms
+ * with the ARMv8 cryptographic extensions, which must be available at runtime
+ * or else an illegal instruction fault will occur.
+ *
+ * \note This allows builds with a smaller code size than with
+ * MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+ *
+ * \note Minimum compiler versions for this feature are Clang 4.0,
+ * armclang 6.6 or GCC 6.0.
+ *
+ * \note \c CFLAGS must be set to a minimum of \c -march=armv8-a+crypto for
+ * armclang <= 6.9
+ *
+ * \warning MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY cannot be defined at the same
+ * time as MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT.
+ *
+ * Requires: MBEDTLS_SHA256_C.
+ *
+ * Module: library/sha256.c
+ *
+ * Uncomment to have the library use the A64 SHA-256 crypto extensions
+ * unconditionally.
+ */
+//#define MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
+
+/**
+ * \def MBEDTLS_SHA384_C
+ *
+ * Enable the SHA-384 cryptographic hash algorithm.
+ *
+ * Module: library/sha512.c
+ * Caller: library/md.c
+ * library/psa_crypto_hash.c
+ * library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * Comment to disable SHA-384
+ */
+#if CONFIG_IS_ENABLED(SHA384)
+#define MBEDTLS_SHA384_C
+#endif
+
+/**
+ * \def MBEDTLS_SHA512_C
+ *
+ * Enable SHA-512 cryptographic hash algorithms.
+ *
+ * Module: library/sha512.c
+ * Caller: library/entropy.c
+ * library/md.c
+ * library/ssl_tls.c
+ * library/ssl_cookie.c
+ *
+ * This module adds support for SHA-512.
+ */
+#if CONFIG_IS_ENABLED(SHA512)
+#define MBEDTLS_SHA512_C
+#endif
+
+/**
+ * \def MBEDTLS_SHA3_C
+ *
+ * Enable the SHA3 cryptographic hash algorithm.
+ *
+ * Module: library/sha3.c
+ *
+ * This module adds support for SHA3.
+ */
+//#define MBEDTLS_SHA3_C
+
+/**
+ * \def MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+ *
+ * Enable acceleration of the SHA-512 and SHA-384 cryptographic hash algorithms
+ * with the ARMv8 cryptographic extensions if they are available at runtime.
+ * If not, the library will fall back to the C implementation.
+ *
+ * \note If MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT is defined when building
+ * for a non-Aarch64 build it will be silently ignored.
+ *
+ * \note Minimum compiler versions for this feature are Clang 7.0,
+ * armclang 6.9 or GCC 8.0.
+ *
+ * \note \c CFLAGS must be set to a minimum of \c -march=armv8.2-a+sha3 for
+ * armclang 6.9
+ *
+ * \warning MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT cannot be defined at the
+ * same time as MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY.
+ *
+ * Requires: MBEDTLS_SHA512_C.
+ *
+ * Module: library/sha512.c
+ *
+ * Uncomment to have the library check for the A64 SHA-512 crypto extensions
+ * and use them if available.
+ */
+//#define MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+
+/**
+ * \def MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY
+ *
+ * Enable acceleration of the SHA-512 and SHA-384 cryptographic hash algorithms
+ * with the ARMv8 cryptographic extensions, which must be available at runtime
+ * or else an illegal instruction fault will occur.
+ *
+ * \note This allows builds with a smaller code size than with
+ * MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+ *
+ * \note Minimum compiler versions for this feature are Clang 7.0,
+ * armclang 6.9 or GCC 8.0.
+ *
+ * \note \c CFLAGS must be set to a minimum of \c -march=armv8.2-a+sha3 for
+ * armclang 6.9
+ *
+ * \warning MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY cannot be defined at the same
+ * time as MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT.
+ *
+ * Requires: MBEDTLS_SHA512_C.
+ *
+ * Module: library/sha512.c
+ *
+ * Uncomment to have the library use the A64 SHA-512 crypto extensions
+ * unconditionally.
+ */
+//#define MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY
+
+/**
+ * \def MBEDTLS_SSL_CACHE_C
+ *
+ * Enable simple SSL cache implementation.
+ *
+ * Module: library/ssl_cache.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_CACHE_C
+ */
+#define MBEDTLS_SSL_CACHE_C
+
+/**
+ * \def MBEDTLS_SSL_COOKIE_C
+ *
+ * Enable basic implementation of DTLS cookies for hello verification.
+ *
+ * Module: library/ssl_cookie.c
+ * Caller:
+ */
+#define MBEDTLS_SSL_COOKIE_C
+
+/**
+ * \def MBEDTLS_SSL_TICKET_C
+ *
+ * Enable an implementation of TLS server-side callbacks for session tickets.
+ *
+ * Module: library/ssl_ticket.c
+ * Caller:
+ *
+ * Requires: (MBEDTLS_CIPHER_C || MBEDTLS_USE_PSA_CRYPTO) &&
+ * (MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C)
+ */
+#define MBEDTLS_SSL_TICKET_C
+
+/**
+ * \def MBEDTLS_SSL_CLI_C
+ *
+ * Enable the SSL/TLS client code.
+ *
+ * Module: library/ssl*_client.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS client support.
+ */
+#define MBEDTLS_SSL_CLI_C
+
+/**
+ * \def MBEDTLS_SSL_SRV_C
+ *
+ * Enable the SSL/TLS server code.
+ *
+ * Module: library/ssl*_server.c
+ * Caller:
+ *
+ * Requires: MBEDTLS_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS server support.
+ */
+#define MBEDTLS_SSL_SRV_C
+
+/**
+ * \def MBEDTLS_SSL_TLS_C
+ *
+ * Enable the generic SSL/TLS code.
+ *
+ * Module: library/ssl_tls.c
+ * Caller: library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
+ * and at least one of the MBEDTLS_SSL_PROTO_XXX defines
+ *
+ * This module is required for SSL/TLS.
+ */
+#define MBEDTLS_SSL_TLS_C
+
+/**
+ * \def MBEDTLS_THREADING_C
+ *
+ * Enable the threading abstraction layer.
+ * By default Mbed TLS assumes it is used in a non-threaded environment or that
+ * contexts are not shared between threads. If you do intend to use contexts
+ * between threads, you will need to enable this layer to prevent race
+ * conditions. See also our Knowledge Base article about threading:
+ * https://mbed-tls.readthedocs.io/en/latest/kb/development/thread-safety-and-multi-threading
+ *
+ * Module: library/threading.c
+ *
+ * This allows different threading implementations (self-implemented or
+ * provided).
+ *
+ * You will have to enable either MBEDTLS_THREADING_ALT or
+ * MBEDTLS_THREADING_PTHREAD.
+ *
+ * Enable this layer to allow use of mutexes within Mbed TLS
+ */
+//#define MBEDTLS_THREADING_C
+
+/**
+ * \def MBEDTLS_TIMING_C
+ *
+ * Enable the semi-portable timing interface.
+ *
+ * \note The provided implementation only works on POSIX/Unix (including Linux,
+ * BSD and OS X) and Windows. On other platforms, you can either disable that
+ * module and provide your own implementations of the callbacks needed by
+ * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
+ * your own implementation of the whole module by setting
+ * \c MBEDTLS_TIMING_ALT in the current file.
+ *
+ * \note The timing module will include time.h on suitable platforms
+ * regardless of the setting of MBEDTLS_HAVE_TIME, unless
+ * MBEDTLS_TIMING_ALT is used. See timing.c for more information.
+ *
+ * \note See also our Knowledge Base article about porting to a new
+ * environment:
+ * https://mbed-tls.readthedocs.io/en/latest/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
+ *
+ * Module: library/timing.c
+ */
+//#define MBEDTLS_TIMING_C
+
+/**
+ * \def MBEDTLS_VERSION_C
+ *
+ * Enable run-time version information.
+ *
+ * Module: library/version.c
+ *
+ * This module provides run-time version information.
+ */
+#define MBEDTLS_VERSION_C
+
+/**
+ * \def MBEDTLS_X509_USE_C
+ *
+ * Enable X.509 core for using certificates.
+ *
+ * Module: library/x509.c
+ * Caller: library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_PARSE_C,
+ * (MBEDTLS_MD_C or MBEDTLS_USE_PSA_CRYPTO)
+ *
+ * \warning If building with MBEDTLS_USE_PSA_CRYPTO, you must call
+ * psa_crypto_init() before doing any X.509 operation.
+ *
+ * This module is required for the X.509 parsing modules.
+ */
+#define MBEDTLS_X509_USE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_PARSE_C
+ *
+ * Enable X.509 certificate parsing.
+ *
+ * Module: library/x509_crt.c
+ * Caller: library/ssl_tls.c
+ * library/ssl*_client.c
+ * library/ssl*_server.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 certificate parsing.
+ */
+#define MBEDTLS_X509_CRT_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CRL_PARSE_C
+ *
+ * Enable X.509 CRL parsing.
+ *
+ * Module: library/x509_crl.c
+ * Caller: library/x509_crt.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is required for X.509 CRL parsing.
+ */
+#define MBEDTLS_X509_CRL_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_PARSE_C
+ *
+ * Enable X.509 Certificate Signing Request (CSR) parsing.
+ *
+ * Module: library/x509_csr.c
+ * Caller: library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_USE_C
+ *
+ * This module is used for reading X.509 certificate request.
+ */
+#define MBEDTLS_X509_CSR_PARSE_C
+
+/**
+ * \def MBEDTLS_X509_CREATE_C
+ *
+ * Enable X.509 core for creating certificates.
+ *
+ * Module: library/x509_create.c
+ *
+ * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_PARSE_C,
+ * (MBEDTLS_MD_C or MBEDTLS_USE_PSA_CRYPTO)
+ *
+ * \warning If building with MBEDTLS_USE_PSA_CRYPTO, you must call
+ * psa_crypto_init() before doing any X.509 create operation.
+ *
+ * This module is the basis for creating X.509 certificates and CSRs.
+ */
+#define MBEDTLS_X509_CREATE_C
+
+/**
+ * \def MBEDTLS_X509_CRT_WRITE_C
+ *
+ * Enable creating X.509 certificates.
+ *
+ * Module: library/x509_crt_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate creation.
+ */
+#define MBEDTLS_X509_CRT_WRITE_C
+
+/**
+ * \def MBEDTLS_X509_CSR_WRITE_C
+ *
+ * Enable creating X.509 Certificate Signing Requests (CSR).
+ *
+ * Module: library/x509_csr_write.c
+ *
+ * Requires: MBEDTLS_X509_CREATE_C
+ *
+ * This module is required for X.509 certificate request writing.
+ */
+#define MBEDTLS_X509_CSR_WRITE_C
+
+/** \} name SECTION: Mbed TLS modules */
+
+/**
+ * \name SECTION: General configuration options
+ *
+ * This section contains Mbed TLS build settings that are not associated
+ * with a particular module.
+ *
+ * \{
+ */
+
+/**
+ * \def MBEDTLS_CONFIG_FILE
+ *
+ * If defined, this is a header which will be included instead of
+ * `"mbedtls/mbedtls_config.h"`.
+ * This header file specifies the compile-time configuration of Mbed TLS.
+ * Unlike other configuration options, this one must be defined on the
+ * compiler command line: a definition in `mbedtls_config.h` would have
+ * no effect.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_CONFIG_FILE "mbedtls/mbedtls_config.h"
+
+/**
+ * \def MBEDTLS_USER_CONFIG_FILE
+ *
+ * If defined, this is a header which will be included after
+ * `"mbedtls/mbedtls_config.h"` or #MBEDTLS_CONFIG_FILE.
+ * This allows you to modify the default configuration, including the ability
+ * to undefine options that are enabled by default.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_USER_CONFIG_FILE "/dev/null"
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_CONFIG_FILE
+ *
+ * If defined, this is a header which will be included instead of
+ * `"psa/crypto_config.h"`.
+ * This header file specifies which cryptographic mechanisms are available
+ * through the PSA API when #MBEDTLS_PSA_CRYPTO_CONFIG is enabled, and
+ * is not used when #MBEDTLS_PSA_CRYPTO_CONFIG is disabled.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_PSA_CRYPTO_CONFIG_FILE "psa/crypto_config.h"
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE
+ *
+ * If defined, this is a header which will be included after
+ * `"psa/crypto_config.h"` or #MBEDTLS_PSA_CRYPTO_CONFIG_FILE.
+ * This allows you to modify the default configuration, including the ability
+ * to undefine options that are enabled by default.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE "/dev/null"
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_PLATFORM_FILE
+ *
+ * If defined, this is a header which will be included instead of
+ * `"psa/crypto_platform.h"`. This file should declare the same identifiers
+ * as the one in Mbed TLS, but with definitions adapted to the platform on
+ * which the library code will run.
+ *
+ * \note The required content of this header can vary from one version of
+ * Mbed TLS to the next. Integrators who provide an alternative file
+ * should review the changes in the original file whenever they
+ * upgrade Mbed TLS.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_PSA_CRYPTO_PLATFORM_FILE "psa/crypto_platform_alt.h"
+
+/**
+ * \def MBEDTLS_PSA_CRYPTO_STRUCT_FILE
+ *
+ * If defined, this is a header which will be included instead of
+ * `"psa/crypto_struct.h"`. This file should declare the same identifiers
+ * as the one in Mbed TLS, but with definitions adapted to the environment
+ * in which the library code will run. The typical use for this feature
+ * is to provide alternative type definitions on the client side in
+ * client-server integrations of PSA crypto, where operation structures
+ * contain handles instead of cryptographic data.
+ *
+ * \note The required content of this header can vary from one version of
+ * Mbed TLS to the next. Integrators who provide an alternative file
+ * should review the changes in the original file whenever they
+ * upgrade Mbed TLS.
+ *
+ * This macro is expanded after an <tt>\#include</tt> directive. This is a popular but
+ * non-standard feature of the C language, so this feature is only available
+ * with compilers that perform macro expansion on an <tt>\#include</tt> line.
+ *
+ * The value of this symbol is typically a path in double quotes, either
+ * absolute or relative to a directory on the include search path.
+ */
+//#define MBEDTLS_PSA_CRYPTO_STRUCT_FILE "psa/crypto_struct_alt.h"
+
+/** \} name SECTION: General configuration options */
+
+/**
+ * \name SECTION: Module configuration options
+ *
+ * This section allows for the setting of module specific sizes and
+ * configuration options. The default values are already present in the
+ * relevant header files and should suffice for the regular use cases.
+ *
+ * Our advice is to enable options and change their values here
+ * only if you have a good reason and know the consequences.
+ * \{
+ */
+/* The Doxygen documentation here is used when a user comments out a
+ * setting and runs doxygen themselves. On the other hand, when we typeset
+ * the full documentation including disabled settings, the documentation
+ * in specific modules' header files is used if present. When editing this
+ * file, make sure that each option is documented in exactly one place,
+ * plus optionally a same-line Doxygen comment here if there is a Doxygen
+ * comment in the specific module. */
+
+/* MPI / BIGNUM options */
+//#define MBEDTLS_MPI_WINDOW_SIZE 2 /**< Maximum window size used. */
+//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
+
+/* CTR_DRBG options */
+//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
+//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
+
+/* HMAC_DRBG options */
+//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
+//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
+//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
+//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
+
+/* ECP options */
+//#define MBEDTLS_ECP_WINDOW_SIZE 4 /**< Maximum window size used */
+//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
+
+/* Entropy options */
+//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
+//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
+//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */
+
+/* Memory buffer allocator options */
+//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
+
+/* Platform options */
+//#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
+
+/** \def MBEDTLS_PLATFORM_STD_CALLOC
+ *
+ * Default allocator to use, can be undefined.
+ * It must initialize the allocated buffer memory to zeroes.
+ * The size of the buffer is the product of the two parameters.
+ * The calloc function returns either a null pointer or a pointer to the allocated space.
+ * If the product is 0, the function may either return NULL or a valid pointer to an array of size 0 which is a valid input to the deallocation function.
+ * An uninitialized #MBEDTLS_PLATFORM_STD_CALLOC always fails, returning a null pointer.
+ * See the description of #MBEDTLS_PLATFORM_MEMORY for more details.
+ * The corresponding deallocation function is #MBEDTLS_PLATFORM_STD_FREE.
+ */
+//#define MBEDTLS_PLATFORM_STD_CALLOC calloc
+
+/** \def MBEDTLS_PLATFORM_STD_FREE
+ *
+ * Default free to use, can be undefined.
+ * NULL is a valid parameter, and the function must do nothing.
+ * A non-null parameter will always be a pointer previously returned by #MBEDTLS_PLATFORM_STD_CALLOC and not yet freed.
+ * An uninitialized #MBEDTLS_PLATFORM_STD_FREE does not do anything.
+ * See the description of #MBEDTLS_PLATFORM_MEMORY for more details (same principles as for MBEDTLS_PLATFORM_STD_CALLOC apply).
+ */
+//#define MBEDTLS_PLATFORM_STD_FREE free
+//#define MBEDTLS_PLATFORM_STD_SETBUF setbuf /**< Default setbuf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
+/* Note: your snprintf must correctly zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */
+
+/* To use the following function macros, MBEDTLS_PLATFORM_C must be enabled. */
+/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */
+//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined. See MBEDTLS_PLATFORM_STD_CALLOC for requirements. */
+//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined. See MBEDTLS_PLATFORM_STD_FREE for requirements. */
+//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_SETBUF_MACRO setbuf /**< Default setbuf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
+//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */
+/* Note: your snprintf must correctly zero-terminate the buffer! */
+//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_VSNPRINTF_MACRO vsnprintf /**< Default vsnprintf macro to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
+//#define MBEDTLS_PLATFORM_MS_TIME_TYPE_MACRO int64_t //#define MBEDTLS_PLATFORM_MS_TIME_TYPE_MACRO int64_t /**< Default milliseconds time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled. It must be signed, and at least 64 bits. If it is changed from the default, MBEDTLS_PRINTF_MS_TIME must be updated to match.*/
+//#define MBEDTLS_PRINTF_MS_TIME PRId64 /**< Default fmt for printf. That's avoid compiler warning if mbedtls_ms_time_t is redefined */
+
+/** \def MBEDTLS_CHECK_RETURN
+ *
+ * This macro is used at the beginning of the declaration of a function
+ * to indicate that its return value should be checked. It should
+ * instruct the compiler to emit a warning or an error if the function
+ * is called without checking its return value.
+ *
+ * There is a default implementation for popular compilers in platform_util.h.
+ * You can override the default implementation by defining your own here.
+ *
+ * If the implementation here is empty, this will effectively disable the
+ * checking of functions' return values.
+ */
+//#define MBEDTLS_CHECK_RETURN __attribute__((__warn_unused_result__))
+
+/** \def MBEDTLS_IGNORE_RETURN
+ *
+ * This macro requires one argument, which should be a C function call.
+ * If that function call would cause a #MBEDTLS_CHECK_RETURN warning, this
+ * warning is suppressed.
+ */
+//#define MBEDTLS_IGNORE_RETURN( result ) ((void) !(result))
+
+/* PSA options */
+/**
+ * Use HMAC_DRBG with the specified hash algorithm for HMAC_DRBG for the
+ * PSA crypto subsystem.
+ *
+ * If this option is unset:
+ * - If CTR_DRBG is available, the PSA subsystem uses it rather than HMAC_DRBG.
+ * - Otherwise, the PSA subsystem uses HMAC_DRBG with either
+ * #MBEDTLS_MD_SHA512 or #MBEDTLS_MD_SHA256 based on availability and
+ * on unspecified heuristics.
+ */
+//#define MBEDTLS_PSA_HMAC_DRBG_MD_TYPE MBEDTLS_MD_SHA256
+
+/** \def MBEDTLS_PSA_KEY_SLOT_COUNT
+ * Restrict the PSA library to supporting a maximum amount of simultaneously
+ * loaded keys. A loaded key is a key stored by the PSA Crypto core as a
+ * volatile key, or a persistent key which is loaded temporarily by the
+ * library as part of a crypto operation in flight.
+ *
+ * If this option is unset, the library will fall back to a default value of
+ * 32 keys.
+ */
+//#define MBEDTLS_PSA_KEY_SLOT_COUNT 32
+
+/* RSA OPTIONS */
+//#define MBEDTLS_RSA_GEN_KEY_MIN_BITS 1024 /**< Minimum RSA key size that can be generated in bits (Minimum possible value is 128 bits) */
+
+/* SSL Cache options */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
+//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
+
+/* SSL options */
+
+/** \def MBEDTLS_SSL_IN_CONTENT_LEN
+ *
+ * Maximum length (in bytes) of incoming plaintext fragments.
+ *
+ * This determines the size of the incoming TLS I/O buffer in such a way
+ * that it is capable of holding the specified amount of plaintext data,
+ * regardless of the protection mechanism used.
+ *
+ * \note When using a value less than the default of 16KB on the client, it is
+ * recommended to use the Maximum Fragment Length (MFL) extension to
+ * inform the server about this limitation. On the server, there
+ * is no supported, standardized way of informing the client about
+ * restriction on the maximum size of incoming messages, and unless
+ * the limitation has been communicated by other means, it is recommended
+ * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN
+ * while keeping the default value of 16KB for the incoming buffer.
+ *
+ * Uncomment to set the maximum plaintext size of the incoming I/O buffer.
+ */
+//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384
+
+/** \def MBEDTLS_SSL_CID_IN_LEN_MAX
+ *
+ * The maximum length of CIDs used for incoming DTLS messages.
+ *
+ */
+//#define MBEDTLS_SSL_CID_IN_LEN_MAX 32
+
+/** \def MBEDTLS_SSL_CID_OUT_LEN_MAX
+ *
+ * The maximum length of CIDs used for outgoing DTLS messages.
+ *
+ */
+//#define MBEDTLS_SSL_CID_OUT_LEN_MAX 32
+
+/** \def MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY
+ *
+ * This option controls the use of record plaintext padding
+ * in TLS 1.3 and when using the Connection ID extension in DTLS 1.2.
+ *
+ * The padding will always be chosen so that the length of the
+ * padded plaintext is a multiple of the value of this option.
+ *
+ * Note: A value of \c 1 means that no padding will be used
+ * for outgoing records.
+ *
+ * Note: On systems lacking division instructions,
+ * a power of two should be preferred.
+ */
+//#define MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 16
+
+/** \def MBEDTLS_SSL_OUT_CONTENT_LEN
+ *
+ * Maximum length (in bytes) of outgoing plaintext fragments.
+ *
+ * This determines the size of the outgoing TLS I/O buffer in such a way
+ * that it is capable of holding the specified amount of plaintext data,
+ * regardless of the protection mechanism used.
+ *
+ * It is possible to save RAM by setting a smaller outward buffer, while keeping
+ * the default inward 16384 byte buffer to conform to the TLS specification.
+ *
+ * The minimum required outward buffer size is determined by the handshake
+ * protocol's usage. Handshaking will fail if the outward buffer is too small.
+ * The specific size requirement depends on the configured ciphers and any
+ * certificate data which is sent during the handshake.
+ *
+ * Uncomment to set the maximum plaintext size of the outgoing I/O buffer.
+ */
+//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384
+
+/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING
+ *
+ * Maximum number of heap-allocated bytes for the purpose of
+ * DTLS handshake message reassembly and future message buffering.
+ *
+ * This should be at least 9/8 * MBEDTLS_SSL_IN_CONTENT_LEN
+ * to account for a reassembled handshake message of maximum size,
+ * together with its reassembly bitmap.
+ *
+ * A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default)
+ * should be sufficient for all practical situations as it allows
+ * to reassembly a large handshake message (such as a certificate)
+ * while buffering multiple smaller handshake messages.
+ *
+ */
+//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768
+
+//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 or 384 bits) */
+//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
+
+/**
+ * Complete list of ciphersuites to use, in order of preference.
+ *
+ * \warning No dependency checking is done on that field! This option can only
+ * be used to restrict the set of available ciphersuites. It is your
+ * responsibility to make sure the needed modules are active.
+ *
+ * Use this to save a few hundred bytes of ROM (default ordering of all
+ * available ciphersuites) and a few to a few hundred bytes of RAM.
+ *
+ * The value below is only an example, not the default.
+ */
+//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+
+/**
+ * \def MBEDTLS_SSL_MAX_EARLY_DATA_SIZE
+ *
+ * The default maximum amount of 0-RTT data. See the documentation of
+ * \c mbedtls_ssl_tls13_conf_max_early_data_size() for more information.
+ *
+ * It must be positive and smaller than UINT32_MAX.
+ *
+ * If MBEDTLS_SSL_EARLY_DATA is not defined, this default value does not
+ * have any impact on the build.
+ *
+ * This feature is experimental, not completed and thus not ready for
+ * production.
+ *
+ */
+//#define MBEDTLS_SSL_MAX_EARLY_DATA_SIZE 1024
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE
+ *
+ * Maximum time difference in milliseconds tolerated between the age of a
+ * ticket from the server and client point of view.
+ * From the client point of view, the age of a ticket is the time difference
+ * between the time when the client proposes to the server to use the ticket
+ * (time of writing of the Pre-Shared Key Extension including the ticket) and
+ * the time the client received the ticket from the server.
+ * From the server point of view, the age of a ticket is the time difference
+ * between the time when the server receives a proposition from the client
+ * to use the ticket and the time when the ticket was created by the server.
+ * The server age is expected to be always greater than the client one and
+ * MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE defines the
+ * maximum difference tolerated for the server to accept the ticket.
+ * This is not used in TLS 1.2.
+ *
+ */
+//#define MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE 6000
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_TICKET_NONCE_LENGTH
+ *
+ * Size in bytes of a ticket nonce. This is not used in TLS 1.2.
+ *
+ * This must be less than 256.
+ */
+//#define MBEDTLS_SSL_TLS1_3_TICKET_NONCE_LENGTH 32
+
+/**
+ * \def MBEDTLS_SSL_TLS1_3_DEFAULT_NEW_SESSION_TICKETS
+ *
+ * Default number of NewSessionTicket messages to be sent by a TLS 1.3 server
+ * after handshake completion. This is not used in TLS 1.2 and relevant only if
+ * the MBEDTLS_SSL_SESSION_TICKETS option is enabled.
+ *
+ */
+//#define MBEDTLS_SSL_TLS1_3_DEFAULT_NEW_SESSION_TICKETS 1
+
+/* X509 options */
+//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */
+//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */
+
+/** \} name SECTION: Module configuration options */
new file mode 100644
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Dummy file to allow mbedtls linked with U-Boot to include assert.h
+ *
+ * Copyright (c) 2023 Linaro Limited
+ * Author: Raymond Mao <raymond.mao@linaro.org>
+ */
+
+#ifndef _MBEDTLS_ASSERT_H
+#define _MBEDTLS_ASSERT_H
+
+#endif /* _MBEDTLS_ASSERT_H */
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Dummy file to allow mbedtls linked with U-Boot to include limits.h
+ *
+ * Copyright (c) 2023 Linaro Limited
+ * Author: Raymond Mao <raymond.mao@linaro.org>
+ */
+
+#ifndef _MBEDTLS_LIMITS_H
+#define _MBEDTLS_LIMITS_H
+
+#undef INT_MAX
+#define INT_MAX 0x7fffffff
+
+#undef UINT_MAX
+#define UINT_MAX 0xffffffffUL
+
+#undef CHAR_BIT
+#define CHAR_BIT 8
+
+#undef UINT32_MAX
+#define UINT32_MAX 0xffffffffUL
+
+#undef UINTPTR_MAX
+#define UINTPTR_MAX 0xffffffffffffffffUL
+
+#undef SIZE_MAX
+#define SIZE_MAX UINTPTR_MAX
+
+#undef UINT64_MAX
+#define UINT64_MAX UINTPTR_MAX
+
+#endif /* _MBEDTLS_LIMITS_H */
Port mbedtls with dummy libc header files. Add mbedtls default config header file. Add mbedtls kbuild makefile. Add Kconfig and mbedtls config submenu. Signed-off-by: Raymond Mao <raymond.mao@linaro.org> --- include/stdio.h | 1 + include/stdlib.h | 1 + lib/Kconfig | 4 + lib/Makefile | 2 + lib/mbedtls/Kconfig | 25 + lib/mbedtls/Makefile | 117 + lib/mbedtls/mbedtls_def_config.h | 4125 ++++++++++++++++++++++++++++++ lib/mbedtls/port/assert.h | 12 + lib/mbedtls/port/limits.h | 33 + 9 files changed, 4320 insertions(+) create mode 100644 lib/mbedtls/Kconfig create mode 100644 lib/mbedtls/Makefile create mode 100644 lib/mbedtls/mbedtls_def_config.h create mode 100644 lib/mbedtls/port/assert.h create mode 100644 lib/mbedtls/port/limits.h