diff mbox series

[U-Boot,12/15] i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz

Message ID 20190516033236.10594-12-peng.fan@nxp.com
State Superseded
Delegated to: Stefano Babic
Headers show
Series [U-Boot,01/15] mx7ulp: Add common plugin codes for mx7ulp | expand

Commit Message

Peng Fan May 16, 2019, 3:19 a.m. UTC 
From: Ye Li <ye.li@nxp.com>

The GPU uses APLL PFD2 as its clock parent (483.84Mhz) with divider
set to 1. This frequecy is out of ULP A0 spec. The MAX rate for GPU
is 350Mhz. So we simply configure the APLL PFD2 to 345.6Mhz (FRAC=28)
to workaround the problem. The correct fix should let GPU handle the
clock rate in kernel.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm/mach-imx/mx7ulp/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/mx7ulp/clock.c b/arch/arm/mach-imx/mx7ulp/clock.c
index 0a0165cad2..6d6697ad99 100644
--- a/arch/arm/mach-imx/mx7ulp/clock.c
+++ b/arch/arm/mach-imx/mx7ulp/clock.c
@@ -300,9 +300,9 @@  void clock_init(void)
 
 	scg_a7_soscdiv_init();
 
-	/* APLL PFD1 = 270Mhz, PFD2=480Mhz, PFD3=800Mhz */
+	/* APLL PFD1 = 270Mhz, PFD2=345.6Mhz, PFD3=800Mhz */
 	scg_enable_pll_pfd(SCG_APLL_PFD1_CLK, 35);
-	scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 20);
+	scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 28);
 	scg_enable_pll_pfd(SCG_APLL_PFD3_CLK, 12);
 
 	init_clk_lpuart();