@@ -10,6 +10,8 @@
#define ARCH_MXC
+#define ROM_SW_INFO_ADDR 0x000001E8
+
#define CAAM_SEC_SRAM_BASE (0x26000000)
#define CAAM_SEC_SRAM_SIZE (SZ_32K)
#define CAAM_SEC_SRAM_END (CAAM_SEC_SRAM_BASE + CAAM_SEC_SRAM_SIZE - 1)
@@ -1112,6 +1114,17 @@ struct usbphy_regs {
u32 usb1_pfda_ctrl1_tog; /* 0x14c */
};
+struct bootrom_sw_info {
+ u8 reserved_1;
+ u8 boot_dev_instance;
+ u8 boot_dev_type;
+ u8 reserved_2;
+ u32 core_freq;
+ u32 axi_freq;
+ u32 ddr_freq;
+ u32 rom_tick_freq;
+ u32 reserved_3[3];
+};
#define is_boot_from_usb(void) (!(readl(USB_PHY0_BASE_ADDR) & (1<<20)))
#define disconnect_from_pc(void) writel(0x0, USBOTG0_RBASE + 0x140)
@@ -17,4 +17,5 @@ enum bt_mode {
SINGLE_BOOT /* LP_BT = 0, DUAL_BT = 0 */
};
+enum boot_device get_boot_device(void);
#endif
@@ -6,6 +6,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/hab.h>
static char *get_reset_cause(char *);
@@ -244,3 +245,29 @@ int mmc_get_env_dev(void)
return board_mmc_get_env_dev(devno);
}
#endif
+
+enum boot_device get_boot_device(void)
+{
+ struct bootrom_sw_info **p =
+ (struct bootrom_sw_info **)ROM_SW_INFO_ADDR;
+
+ enum boot_device boot_dev = SD1_BOOT;
+ u8 boot_type = (*p)->boot_dev_type;
+ u8 boot_instance = (*p)->boot_dev_instance;
+
+ switch (boot_type) {
+ case BOOT_TYPE_SD:
+ boot_dev = boot_instance + SD1_BOOT;
+ break;
+ case BOOT_TYPE_MMC:
+ boot_dev = boot_instance + MMC1_BOOT;
+ break;
+ case BOOT_TYPE_USB:
+ boot_dev = USB_BOOT;
+ break;
+ default:
+ break;
+ }
+
+ return boot_dev;
+}
Add get_boot_device for i.MX7ULP Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 13 +++++++++++++ arch/arm/include/asm/arch-mx7ulp/sys_proto.h | 1 + arch/arm/mach-imx/mx7ulp/soc.c | 27 +++++++++++++++++++++++++++ 3 files changed, 41 insertions(+)