diff mbox series

[U-Boot,v4,25/27] armv8: ls1012aqds: fix secure boot compilation

Message ID 20181012144454.3707-26-rajesh.bhagat@nxp.com
State Superseded
Delegated to: York Sun
Headers show
Series TF-A Boot support for NXP Chassis 2 platforms | expand

Commit Message

Rajesh Bhagat Oct. 12, 2018, 2:44 p.m. UTC
Includes environment.h file in ls1012aqds.c Also, enables
pfe validation

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
---
Change in v4: 
 - Changed order to solve compilation error

Change in v3: None
Change in v2: None


 board/freescale/ls1012aqds/Kconfig      | 10 ++++++++++
 board/freescale/ls1012aqds/ls1012aqds.c |  6 ++++++
 include/configs/ls1012aqds.h            |  1 +
 3 files changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index b702fb2740..8844557aae 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -16,6 +16,12 @@  config SYS_LS_PPA_FW_ADDR
         hex "PPA Firmware Addr"
         default 0x40400000
 
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
@@ -33,6 +39,10 @@  config SYS_LS_PFE_FW_ADDR
 	hex "Flash address of PFE firmware"
 	default 0x40a00000
 
+config SYS_LS_PFE_ESBC_ADDR
+	hex "PFE Firmware HDR Addr"
+	default 0x40700000
+
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
 	default 0x03800000
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 7102237756..3a1c2351c4 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -18,12 +18,14 @@ 
 #include <ahci.h>
 #include <hwconfig.h>
 #include <mmc.h>
+#include <environment.h>
 #include <scsi.h>
 #include <fm_eth.h>
 #include <fsl_esdhc.h>
 #include <fsl_mmdc.h>
 #include <spl.h>
 #include <netdev.h>
+#include <fsl_sec.h>
 #include "../common/qixis.h"
 #include "ls1012aqds_qixis.h"
 #include "ls1012aqds_pfe.h"
@@ -121,6 +123,10 @@  int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index c5bdea6798..c76bfdc8f8 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -117,4 +117,5 @@ 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */