@@ -203,43 +203,6 @@ Flash map for samus / broadwell:
---
-Intel Crown Bay specific instructions for bare mode:
-
-U-Boot support of Intel Crown Bay board [4] relies on a binary blob called
-Firmware Support Package [5] to perform all the necessary initialization steps
-as documented in the BIOS Writer Guide, including initialization of the CPU,
-memory controller, chipset and certain bus interfaces.
-
-Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
-install it on your host and locate the FSP binary blob. Note this platform
-also requires a Chipset Micro Code (CMC) state machine binary to be present in
-the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
-in this FSP package too.
-
-* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
-* ./Microcode/C0_22211.BIN
-
-Rename the first one to fsp.bin and second one to cmc.bin and put them in the
-board directory.
-
-Note the FSP release version 001 has a bug which could cause random endless
-loop during the FspInit call. This bug was published by Intel although Intel
-did not describe any details. We need manually apply the patch to the FSP
-binary using any hex editor (eg: bvi). Go to the offset 0x1fcd8 of the FSP
-binary, change the following five bytes values from orginally E8 42 FF FF FF
-to B8 00 80 0B 00.
-
-As for the video ROM, you need manually extract it from the Intel provided
-BIOS for Crown Bay here [6], using the AMI MMTool [7]. Check PCI option ROM
-ID 8086:4108, extract and save it as vga.bin in the board directory.
-
-Now you can build U-Boot and obtain u-boot.rom
-
-$ make crownbay_defconfig
-$ make all
-
----
-
Intel Cougar Canyon 2 specific instructions for bare mode:
This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
@@ -5,3 +5,5 @@ Board-specific doc
.. toctree::
:maxdepth: 2
+
+ intel/index
new file mode 100644
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
+
+Crown Bay CRB
+=============
+
+U-Boot support of Intel `Crown Bay`_ board relies on a binary blob called
+Firmware Support Package (`FSP`_) to perform all the necessary initialization
+steps as documented in the BIOS Writer Guide, including initialization of the
+CPU, memory controller, chipset and certain bus interfaces.
+
+Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
+install it on your host and locate the FSP binary blob. Note this platform
+also requires a Chipset Micro Code (CMC) state machine binary to be present in
+the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
+in this FSP package too.
+
+ * ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
+ * ./Microcode/C0_22211.BIN
+
+Rename the first one to fsp.bin and second one to cmc.bin and put them in the
+board directory.
+
+Note the FSP release version 001 has a bug which could cause random endless
+loop during the FspInit call. This bug was published by Intel although Intel
+did not describe any details. We need manually apply the patch to the FSP
+binary using any hex editor (eg: bvi). Go to the offset 0x1fcd8 of the FSP
+binary, change the following five bytes values from orginally E8 42 FF FF FF
+to B8 00 80 0B 00.
+
+As for the video ROM, you need manually extract it from the Intel provided
+BIOS for Crown Bay `here`_, using the AMI `MMTool`_. Check PCI option
+ROM ID 8086:4108, extract and save it as vga.bin in the board directory.
+
+Now you can build U-Boot and obtain u-boot.rom::
+
+ $ make crownbay_defconfig
+ $ make all
+
+.. _`Crown Bay`: http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-platforms/atom-e660-eg20t-development-kit.html
+.. _`FSP`: http://www.intel.com/fsp
+.. _`here`: http://www.intel.com/content/www/us/en/secure/intelligent-systems/privileged/e6xx-35-b1-cmc22211.html
+.. _`MMTool`: http://www.ami.com/products/bios-uefi-tools-and-utilities/bios-uefi-utilities/
new file mode 100644
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Intel
+=====
+
+.. toctree::
+ :maxdepth: 2
+
+ crownbay
This extracts Intel Crown Bay board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> --- doc/README.x86 | 37 ------------------------------------- doc/board/index.rst | 2 ++ doc/board/intel/crownbay.rst | 43 +++++++++++++++++++++++++++++++++++++++++++ doc/board/intel/index.rst | 9 +++++++++ 4 files changed, 54 insertions(+), 37 deletions(-) create mode 100644 doc/board/intel/crownbay.rst create mode 100644 doc/board/intel/index.rst