| [U-Boot,1/4,V5] EXYNOS5: FDT: Add compatible strings for Serial |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,03/10] image: Introduce fit_image_load() to load images from FITs |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,07/10] image: Use fit_image_load() to load kernel |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot] board/b4860qds: Relax NOR flash teadc timing parameter |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] disk: Fix possible out-of-bounds access in part_efi.c |
2013-05-19 |
Marek Vasut |
|
New |
| [U-Boot,v1] DOS_PBR block type is also valid dos block type. |
2013-03-11 |
Sonic Zhang |
trini |
New |
| [U-Boot,1/2,v3] Exynos5: spl: Reorganize mem_timing struct to gain space in spl |
2013-03-06 |
Akshay Saraswat |
prom |
New |
| [U-Boot,2/2,v3] Exynos5: spl: Reduce clock init in spl |
2013-03-06 |
Akshay Saraswat |
prom |
New |
| [U-Boot] powerpc: Add support for CONFIG_OF_CONTROL |
2013-04-15 |
Jonathan Klee |
afleming |
New |
| [U-Boot,v3,02/11] net: ftgmac100: add MMU/D-cache support |
2013-04-26 |
Kuo-Jung Su |
jhersh |
New |
| [U-Boot,v3,01/11] arm: add MMU/D-Cache support for Faraday cores |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v3,03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support |
2013-04-26 |
Kuo-Jung Su |
jhersh |
New |
| [U-Boot,v3,04/11] i2c: add Faraday FTI2C010 I2C controller support |
2013-04-26 |
Kuo-Jung Su |
hs |
New |
| [U-Boot,v3,05/11] spi: add Faraday FTSPI010 SPI controller support |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v3,07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support |
2013-04-26 |
Kuo-Jung Su |
scottwood |
New |
| [U-Boot,v3,11/11] arm: add Faraday A36x SoC platform support |
2013-04-26 |
Kuo-Jung Su |
aaribaud |
New |
| [U-Boot,v5,1/7] cros: add cros_ec driver |
2013-05-15 |
Hung-ying Tyan |
trini |
New |
| [U-Boot] tools/env: check flash length before probing |
2012-04-05 |
Mike Frysinger |
jhersh |
New |
| [U-Boot,04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v2,03/15] zynq: Move scutimer baseaddr to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,11/15] net: gem: Preserve clk on emio interface |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,07/15] net: gem: Do not initialize BDs again |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,09/15] zynq: Move macros to hardware.h |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,10/15] net: gem: Pass phy address to init |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,12/15] net: gem: Add support for phy autodetection |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,13/15] mmc: Add support for Xilinx Zynq sdhci controller |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,14/15] i2c: zynq: Add support for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,15/15] fpga: Add support for loading bitstream for Xilinx Zynq |
2013-04-23 |
Michal Simek |
monstr |
New |
| [U-Boot,02/11] powerpc/ppc4xx: Add gdsys mclink interface |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards |
2013-04-22 |
Dirk Eibach |
stroese |
New |
| [U-Boot,v2,2/3] net: ks8851_mll: add ethernet support |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,1/2] ARM: tegra: support SKU 1 of Tegra114 |
2013-05-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,2/2] ARM: tegra: support SKU 7 of Tegra20 |
2013-05-18 |
Stephen Warren |
tomcwarren |
New |
| [U-Boot,v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 |
2013-05-18 |
Scott Wood |
|
New |
| [U-Boot] p1020rdb-pd: platform support |
2013-04-28 |
Haijun.Zhang |
afleming |
New |
| [U-Boot,v5,2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,7/7] mpc85xx: Add gdsys ControlCenter Digital board |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,1/7] Update gdsys email account |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0 |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,5/7] Add Atmel I2C tpm |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v5,6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM |
2013-04-30 |
Dirk Eibach |
afleming |
New |
| [U-Boot,v3,05/10] image: Use fit_image_load() to load FDT |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure |
2013-04-29 |
Andrew Gabbasov |
stroese |
New |
| [U-Boot,3/4] EXYNOS4210: Configure GPIO for uart |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4] EXYNOS: Move files from board/samsung to arch/arm. |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,V9,3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,V9,9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition |
2013-04-27 |
Amar |
prom |
New |
| [U-Boot,v2,1/3] checkpatch: add ignore for network block comment style checking |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v2,3/3] ARM: at91sam9n12: add network support with ksz8851_16mll |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,1/3] net: macb: using AT91FAMILY replace #ifdeferry |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,3/3] net: macb: add support for gigabit MAC |
2013-04-24 |
Bo Shen |
jhersh |
New |
| [U-Boot,v3,02/10] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,10/10] sandbox: image: Create a test for loading FIT images |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,08/10] sandbox: image: Adjust FIT image printing to work with sandbox |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot,v3,04/10] image: Use fit_image_load() to load ramdisk |
2013-05-16 |
Simon Glass |
trini |
New |
| [U-Boot] Fix device detection for API consumers |
2013-05-19 |
Ilya Bakulin |
|
New |
| [U-Boot,v4,1/4] mx31pdk: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,v4,2/4] tx25: copy SPL directly, not using relocate_code. |
2013-05-19 |
Albert ARIBAUD |
|
New |
| [U-Boot,11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC |
2012-11-25 |
Henrik Nordström |
aaribaud |
New |
| [U-Boot,v2,1/2] microblaze: bootm: Fix coding style issues |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2,2/2] microblaze: bootm: Add support for loading initrd |
2013-05-06 |
Michal Simek |
monstr |
New |
| [U-Boot,v2] gpio: Add support for microblaze xilinx GPIO |
2013-05-03 |
Michal Simek |
monstr |
New |
| [U-Boot] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-02 |
Dirk Behme |
sbabic |
New |
| [U-Boot] net: phy: supplement support for Micrel's KSZ9031 |
2013-04-30 |
SARTRE Leo |
jhersh |
New |
| [U-Boot,2/2] buildman: Produce a sensible error message when branch is missing |
2013-05-03 |
Simon Glass |
sjg |
New |
| [U-Boot] usb: net: Move software resets to basic_init |
2013-04-03 |
Simon Glass |
jhersh |
New |
| [U-Boot,PULL] u-boot-pxa.git/master |
2013-05-06 |
Marek Vasut |
aaribaud |
New |
| [U-Boot,2/6] ARM: add assembly routine to switch to non-secure state |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,1/2] common: Add CCACHE variable to allow use of ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,2/2] common: Use separate dirs for each board for ccache |
2013-05-20 |
Marek Vasut |
|
New |
| [U-Boot,1/6] ARM: add secure monitor handler to switch to non-secure state |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,5/6] ARM: extend non-secure switch to also go into HYP mode |
2013-05-06 |
Andre Przywara |
aaribaud |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-05-03 |
Vadim Bendebury |
prom |
New |
| [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,3/6] README: mx28_common: Fix structure of sentence |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/2] ARM: bcm2835: add simplefb DT node during bootz/m |
2013-05-08 |
Stephen Warren |
aaribaud |
New |
| [U-Boot] video: exynos: remove unused variable of exynos_mipi_dsi_wr_data() |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot,1/6,v2] powerpc/doc: Update the README.srio-pcie-boot-corenet |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,2/6,v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,3/6,v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,4/6,v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,5/6,v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,6/6,v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE |
2013-05-07 |
Liu Gang |
afleming |
New |
| [U-Boot,1/2] lcd: add functions to setup up simplefb device tree |
2013-05-08 |
Stephen Warren |
aaribaud |
New |
| [U-Boot,v5,2/4] usb: ehci: add weak-aliased functions to portsc & tdi |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,4/4] usb: gadget: add Faraday FOTG210 USB gadget support |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,3/4] usb: ehci: add Faraday USB 2.0 EHCI support |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,v5,1/4] usb: hub: make minimum power-on delay configurable |
2013-05-09 |
Kuo-Jung Su |
marex |
New |
| [U-Boot,PULL] : Please pull u-boot-imx |
2013-05-07 |
Stefano Babic |
aaribaud |
New |
| [U-Boot,v2,1/2] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-09 |
Dirk Behme |
sbabic |
New |