Patches

Show patches with: Archived = No   
« 1 2 ... 154 155 156564 565 »
Patch A/R/T S/W/F Date Submitter Delegate State
[U-Boot,2/2] embestmx6boards: convert to use config_distro_bootcmd.h - - 1 0 0 0 2014-12-14 Iain Paton sbabic Awaiting Upstream
[U-Boot,1/2] embestmx6boards: convert to use config_distro_defaults.h - - 1 0 0 0 2014-12-14 Iain Paton sbabic Awaiting Upstream
[U-Boot] sun7i: Add support for Olimex A20-OLinuXino-LIME2 - - - 0 0 0 2014-09-28 Iain Paton jwrdegoede Accepted
[U-Boot] embestmx6boards: convert to generic board - - - 0 0 0 2014-06-09 Iain Paton sbabic Awaiting Upstream
[U-Boot] embest/mx6boards: only toggle eMMC usdhc3 RST line on MarSboard - - - 0 0 0 2014-06-09 Iain Paton sbabic Awaiting Upstream
[U-Boot] arndale: Apply Cortex-A15 errata #773022 and #774769 - - - 0 0 0 2015-09-29 Ian Campbell trini Accepted
[U-Boot] sunxi: set GMAC TX delay = 0x1 on Cubietruck. - - - 0 0 0 2015-03-25 Ian Campbell jwrdegoede Accepted
[U-Boot,2/2] dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb 1 - - 0 0 0 2015-02-24 Ian Campbell prafulla@marvell.com Accepted
[U-Boot,1/2] dreamplug: switch to GENERIC_BOARD 1 - - 0 0 0 2015-02-24 Ian Campbell prafulla@marvell.com Accepted
[U-Boot] sunxi: Use a common CONFIG_SYS_PROMPT - - - 0 0 0 2015-01-23 Ian Campbell jwrdegoede Accepted
[U-Boot,v2] sunxi: Add support for Mele M5. - - - 0 0 0 2015-01-22 Ian Campbell ijc Accepted
[U-Boot] sunxi: Add support for Mele M5. - - - 0 0 0 2015-01-22 Ian Campbell Superseded
[U-Boot,v1,4/4] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 - - - 0 0 0 2015-01-13 Ian Campbell tomcwarren Superseded
[U-Boot,v1,3/4] jetson-tk1: Add PSCI configuration options and reserve secure code - - - 0 0 0 2015-01-13 Ian Campbell tomcwarren Superseded
[U-Boot,v1,2/4] virt-dt: Allow reservation of the secure region when it is in a RAM carveout. - - - 0 0 0 2015-01-13 Ian Campbell tomcwarren Superseded
[U-Boot,v1,1/4] tegra124: Add more registers to struct mc_ctlr - - - 0 0 0 2015-01-13 Ian Campbell tomcwarren Superseded
[U-Boot] ARM: bootm: do not add PSCI to fdt when booting in secure mode. 1 - - 0 0 0 2014-12-21 Ian Campbell trini Accepted
[U-Boot,v2] exynos5250/arndale: Enable SATA/AHCI support. - - - 0 0 0 2014-12-08 Ian Campbell prom Accepted
[U-Boot,v3,3/3] exynos: Increase command line buffer size (CONFIG_SYS_CBSIZE) 1 - - 0 0 0 2014-11-09 Ian Campbell prom Accepted
[U-Boot,v3,2/3] exynos5: Use config_distro_bootcmd.h - 1 1 0 0 0 2014-11-09 Ian Campbell prom Accepted
[U-Boot,v3,1/3] exynos: Enable config_distro_defaults.h - 1 1 0 0 0 2014-11-09 Ian Campbell prom Accepted
[U-Boot,v2,7/7] sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms. - 1 - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,6/7] sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD> - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,5/7] sunxi: Drop FEL variants of defconfigs. - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,4/7] sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?I - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,3/7] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,2/7] sunxi: kconfig: Rename TARGET_SUN[45678]I to MACH_SUN[45678]I. - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,1/7] sunxi: kconfig: Add top-level ARCH_SUNXI - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v2,0/7] sunxi: Kconfig consolidation and cleanup - - - 0 0 0 2014-10-24 Ian Campbell jwrdegoede Accepted
[U-Boot,v3,6/6] sunxi: Kconfig: Unify sunxi Kconfig code - - - 0 0 0 2014-10-21 Ian Campbell ijc Accepted
[U-Boot,v2,2/2] exynos5: Use config_distro_bootcmd.h - 1 - 0 0 0 2014-10-16 Ian Campbell prom Changes Requested
[U-Boot,v2,1/2] exynos: Enable config_distro_defaults.h - 1 - 0 0 0 2014-10-16 Ian Campbell prom Changes Requested
[U-Boot,2/2] HACK: arndale: deinit scsi before launching Linux - - - 0 0 0 2014-10-07 Ian Campbell prom RFC
[U-Boot,1/2] exynos5250/arndale: Enable SATA/AHCI support. - - - 0 0 0 2014-10-07 Ian Campbell prom RFC
[U-Boot] arndale: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - 0 0 0 2014-10-07 Ian Campbell prom Changes Requested
[U-Boot] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - 0 0 0 2014-10-07 Ian Campbell ijc Superseded
[U-Boot] HACK: arndale: deinit scsi before launching Linux - - - 0 0 0 2014-10-07 Ian Campbell prom Changes Requested
[U-Boot] arndale: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - 0 0 0 2014-10-07 Ian Campbell prom Changes Requested
[U-Boot] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE) - - - 0 0 0 2014-10-07 Ian Campbell ijc Accepted
[U-Boot,for-next,3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option 1 - - 0 0 0 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,for-next,2/3] sunxi: kconfig: Add top-level TARGET_SUNXI 1 - - 0 0 0 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,for-next,1/3] sunxi: Kconfig: Consolidate SYS_CONFIG_NAME settings 1 - - 0 0 0 2014-10-04 Ian Campbell ijc Superseded
[U-Boot,for-next,0/3] sunxi: Kconfig consolidation and cleanup - - - 0 0 0 2014-10-04 Ian Campbell ijc Accepted
[U-Boot,for-v2014.10?] pxe: Ensure we don't overflow bootargs - - - 0 0 0 2014-10-03 Ian Campbell trini Accepted
[U-Boot] arndale: Use config_distro_bootcmd.h - - - 0 0 0 2014-09-29 Ian Campbell aaribaud Not Applicable
[U-Boot,for-next] arndale: Enable config_distro_defaults.h - - - 0 0 0 2014-09-26 Ian Campbell aaribaud Not Applicable
[U-Boot] Please pull u-boot-sunxi.git/master - - - 0 0 0 2014-09-05 Ian Campbell aaribaud Accepted
[U-Boot,v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE 1 - - 0 0 0 2014-08-31 Ian Campbell ijc Accepted
[U-Boot,7/7] sunxi: Add environment settings to make extlinux.conf booting work - - - 0 0 0 2014-08-30 Ian Campbell Superseded
[U-Boot] sunxi: make mksunxiboot available to tools-only builds 1 - - 0 0 0 2014-07-28 Ian Campbell ijc Rejected
[U-Boot,v2] board_r: Add missing return to initr_doc 1 - - 0 0 0 2014-07-24 Ian Campbell trini Accepted
[U-Boot] cubieboard2: Enable AXP209 power controller 1 - - 0 0 0 2014-07-24 Ian Campbell jwrdegoede Accepted
[U-Boot,2/3] board_r: run scsi init() on ARM too 1 - - 0 0 0 2014-07-21 Ian Campbell trini Accepted
[U-Boot] board_r: Add missing return to initr_doc 1 - - 0 0 0 2014-07-21 Ian Campbell ijc Changes Requested
[U-Boot,v5,2/2] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs - - - 0 0 0 2014-07-18 Ian Campbell jwrdegoede Accepted
[U-Boot,v5,1/2] sunxi: HYP/non-sec: add sun7i PSCI backend - - - 0 0 0 2014-07-18 Ian Campbell jwrdegoede Accepted
[U-Boot,3/3] ahci: provide sunxi SATA driver using AHCI platform framework 1 - - 0 0 0 2014-07-18 Ian Campbell ijc Accepted
[U-Boot,2/3] board_r: run scsi init() on ARM too - - - 0 0 0 2014-07-18 Ian Campbell sjg Changes Requested
[U-Boot,1/3] AHCI: Increase link timeout to 200ms 1 - - 0 0 0 2014-07-18 Ian Campbell trini Accepted
[U-Boot] Please pull u-boot-sunxi.git/master - - - 0 0 0 2014-07-18 Ian Campbell aaribaud Accepted
[U-Boot,v5,11/11] ARM: HYP/non-sec: remove MIDR check to validate CBAR 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,10/11] ARM: HYP/non-sec/PSCI: emit DT nodes 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,09/11] ARM: convert arch_fixup_memory_node to a generic FDT fixup function 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,08/11] ARM: HYP/non-sec: add the option for a second-stage monitor 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,07/11] ARM: HYP/non-sec: add generic ARMv7 PSCI code 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,06/11] ARM: HYP/non-sec: allow relocation to secure RAM 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,05/11] ARM: HYP/non-sec: add separate section for secure code 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,04/11] ARM: add missing HYP mode constant 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,03/11] ARM: non-sec: reset CNTVOFF to zero 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,02/11] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot,v5,01/11] ARM: HYP/non-sec: move switch to non-sec to the last boot phase 1 - - 0 0 0 2014-07-12 Ian Campbell aaribaud Accepted
[U-Boot] Please pull u-boot-sunxi.git/next - - - 0 0 0 2014-07-08 Ian Campbell aaribaud Superseded
[U-Boot,v3,00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements 1 - - 0 0 0 2014-07-07 Ian Campbell ijc Accepted
[U-Boot,v3,00/10] sunxi: Bug fixes, sun4i and sun5i support and network improvements - - - 0 0 0 2014-07-06 Ian Campbell trini Changes Requested
[U-Boot] git-mailrc: Add sunxi custodians. 1 - - 0 0 0 2014-07-03 Ian Campbell trini Accepted
[U-Boot,6/6] ahci: provide sunxi SATA driver using AHCI platform framework 1 - - 0 0 0 2014-06-05 Ian Campbell aaribaud Accepted
[U-Boot,5/6] sunxi: use setbits_le32 to enable the DMA clock 1 - - 0 0 0 2014-06-05 Ian Campbell ijc Accepted
[U-Boot,4/6] sunxi: add gpio driver 1 - - 0 0 0 2014-06-05 Ian Campbell ijc Accepted
[U-Boot,3/6] sunxi: add Cubieboard2 support 1 - - 0 0 0 2014-06-05 Ian Campbell ijc Accepted
[U-Boot,2/6] board_r: run scsi init() on ARM too 2 - - 0 0 0 2014-06-05 Ian Campbell aaribaud Accepted
[U-Boot,1/6] AHCI: Increase link timeout to 200ms 1 - - 0 0 0 2014-06-05 Ian Campbell aaribaud Accepted
[U-Boot,v2,0/6] sunxi: GPIO, AHCI and Cubieboard 2 support. - - - 0 0 0 2014-06-05 Ian Campbell aaribaud Not Applicable
[U-Boot,5/5] ahci: provide sunxi SATA driver using AHCI platform framework 2 - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,4/5] sunxi: add gpio driver - - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,3/5] sunxi: add Cubieboard2 support - - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,2/5] board_r: run scsi init() on ARM too 1 - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,1/5] AHCI: Increase link timeout to 200ms - - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,0/5] sunxi: GPIO, AHCI and Cubieboard 2 support. - - - 0 0 0 2014-05-31 Ian Campbell aaribaud Superseded
[U-Boot,v3,4/5] net/designware: reorder struct dw_eth_dev to pack more efficiently. - 1 1 0 0 0 2014-05-14 Ian Campbell aaribaud Accepted
[U-Boot,v3,5/5] net/designware: Make DMA burst length configurable and reduce by default - - - 0 0 0 2014-05-08 Ian Campbell aaribaud Accepted
[U-Boot,v3,4/5] net/designware: reorder struct dw_eth_dev to pack more efficiently. - - - 0 0 0 2014-05-08 Ian Campbell aaribaud Superseded
[U-Boot,v3,3/5] net/designware: ensure cache invalidations are aligned to ARCH_DMA_MINALIGN - - - 0 0 0 2014-05-08 Ian Campbell aaribaud Accepted
[U-Boot,v3,2/5] net/designware: ensure device private data is DMA aligned. 1 1 - 0 0 0 2014-05-08 Ian Campbell aaribaud Accepted
[U-Boot,v3,1/5] net/designware: call phy_connect_dev() to properly setup phylib device - - - 0 0 0 2014-05-08 Ian Campbell aaribaud Accepted
[U-Boot,v3,0/5] net/designware: fixes for data cache, phylib and burst size - - - 0 0 0 2014-05-08 Ian Campbell trini Not Applicable
[U-Boot,linux-sunxi,v5,7/8] sunxi: mmc support - 3 - 0 0 0 2014-05-05 Ian Campbell aaribaud Accepted
[U-Boot,v5,8/8] sunxi: non-FEL SPL boot support for sun7i - 2 - 0 0 0 2014-05-05 Ian Campbell aaribaud Accepted
[U-Boot,v5,7/8] sunxi: mmc support - 2 - 0 0 0 2014-05-05 Ian Campbell aaribaud Superseded
[U-Boot,v5,6/8] sunxi: add gmac Ethernet support - 2 - 0 0 0 2014-05-05 Ian Campbell aaribaud Accepted
[U-Boot,v5,5/8] sunxi: add support for Cubietruck booting in FEL mode - 2 - 0 0 0 2014-05-05 Ian Campbell aaribaud Accepted
« 1 2 ... 154 155 156564 565 »