Show patches with: Archived = No       |   167497 patches
« 1 2 ... 673 674 675 … 1674 1675 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,06/20] imx8m: update imx-regs for i.MX8MM imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,07/20] imx: add get_cpu_rev support for i.MX8MM imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,08/20] imx8m: rename clock to clock_imx8mq imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,09/20] imx8m: restructure clock.h imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,10/20] imx8m: add clk support for i.MX8MM imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,11/20] imx8m: add pin header for i.MX8MM imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,12/20] imx: add i.MX8MM PE property imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,13/20] imx8m: Fix MMU table issue for OPTEE memory imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,14/20] imx8m: set BYPASS ID SWAP to avoid AXI bus errors imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,15/20] imx8m: Configure trustzone region 0 for non-secure access imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,17/20] imx8m: soc: enable SCTR clock before timer init imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,18/20] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,19/20] pinctrl: add imx8m driver imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Accepted
[U-Boot,20/20] imx: add i.MX8MM EVK board support imx: add i.MX8MM support - - - - --- 2019-01-28 Peng Fan sbabic Changes Requested
[U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,02/10] dt-bindings: pinctrl: add i.MX8QM pads definition [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,04/10] arm: dts: introduce dtsi for i.MX8QM [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,05/10] imx8: add cpu support [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,06/10] clk: imx8: split code into common and soc specific part [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,07/10] clk: imx8: add i.MX8QM clk driver [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,08/10] imx8: imx8-pins: add i.MX8QM [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,09/10] misc: imx8: scu: add i.MX8QM support [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,RESEND,10/10] imx: support i.MX8QM MEK board [U-Boot,RESEND,01/10] pinctrl: imx8: add i.MX8QM compatible - - - - --- 2019-03-05 Peng Fan sbabic Awaiting Upstream
[U-Boot] imx8qxp: mek: enable dm-spl for pm [U-Boot] imx8qxp: mek: enable dm-spl for pm - - - - --- 2019-03-07 Peng Fan sbabic Accepted
[U-Boot,1/8] imx: sip: add call_imx_sip_ret2 [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Accepted
[U-Boot,2/8] imx8: fuse: add fuse driver [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Accepted
[U-Boot,3/8] imx8qxp: mek: Enable CMD_FUSE [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Accepted
[U-Boot,4/8] misc: imx8: add sc_misc_get_temp [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Changes Requested
[U-Boot,5/8] thermal: add i.MX8 thermal driver [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Changes Requested
[U-Boot,6/8] imx8: cpu: get temperature when print cpu desc [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Superseded
[U-Boot,7/8] imx: imx8dx/qxp: enable thermal [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Changes Requested
[U-Boot,8/8] imx8: mek: move HUSH_PARSER to defconfig [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 - - - - --- 2019-04-12 Peng Fan sbabic Accepted
[U-Boot] net: fec_mxc: not access reserved register on i.MX8 [U-Boot] net: fec_mxc: not access reserved register on i.MX8 1 - - - --- 2019-04-15 Peng Fan sbabic Accepted
[U-Boot] imx: add lowlevel init for ARM64 [U-Boot] imx: add lowlevel init for ARM64 - - - - --- 2019-04-15 Peng Fan sbabic Accepted
[U-Boot] imx: 8qxp_mek: fix fdt_file and console [U-Boot] imx: 8qxp_mek: fix fdt_file and console - - 1 - --- 2019-04-15 Peng Fan sbabic Accepted
[U-Boot] mmc: support hs400 enhanced strobe mode [U-Boot] mmc: support hs400 enhanced strobe mode - - - - --- 2019-04-16 Peng Fan freenix Superseded
[U-Boot] imx: i.MX8MQ: clear ocotp error bit [U-Boot] imx: i.MX8MQ: clear ocotp error bit - - - - --- 2019-04-17 Peng Fan sbabic Accepted
[U-Boot,1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 [U-Boot,1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 - - - - --- 2019-04-17 Peng Fan sbabic Accepted
[U-Boot,2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 [U-Boot] imx: i.MX8MQ: clear ocotp error bit - - - 1 --- 2019-04-17 Peng Fan sbabic Accepted
[U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry [U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry - - - - --- 2019-04-22 Peng Fan sbabic Accepted
[U-Boot] MAINTAINERS, git-mailrc: Update the mmc maintainer [U-Boot] MAINTAINERS, git-mailrc: Update the mmc maintainer 1 - - - --- 2019-04-24 Peng Fan trini Accepted
[U-Boot] imx: mx6sabresd: fix boot hang with video [U-Boot] imx: mx6sabresd: fix boot hang with video - - 1 - --- 2019-04-25 Peng Fan ag Accepted
[U-Boot,1/2] imx: mx6sabresd: fix usb functions when DM enabled [U-Boot,1/2] imx: mx6sabresd: fix usb functions when DM enabled - - - - --- 2019-04-25 Peng Fan sbabic Superseded
[U-Boot,2/2] imx6qdl: add alias for usb0/1 [U-Boot,1/2] imx: mx6sabresd: fix usb functions when DM enabled - - - - --- 2019-04-25 Peng Fan sbabic Superseded
[U-Boot,V2] imx8: cpu: get temperature when print cpu desc [U-Boot,V2] imx8: cpu: get temperature when print cpu desc - - - - --- 2019-04-26 Peng Fan sbabic Superseded
[U-Boot] drivers: core: use strcmp when find device by name [U-Boot] drivers: core: use strcmp when find device by name - - 1 - --- 2019-04-28 Peng Fan sjg Superseded
[U-Boot,i.MX8MM+CCF,01/41] clk: correct get clk_x pointer i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,02/41] clk: fixed-factor: fix get clk_fixed_factor i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,03/41] clk: introduce clk_dev_binded i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,04/41] clk: use clk_dev_binded i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,05/41] clk-provider: sync more clk flags from Linux Kernel i.MX8MM + CCF - - 1 - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,06/41] cmd: clk: print err value when clk_get_rate failed i.MX8MM + CCF - - 1 - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,07/41] clk: mux: add set parent support i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,08/41] clk: export mux/divider ops i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,09/41] clk: add clk-gate support i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,10/41] divider set rate supporrt i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,11/41] clk: fixed_rate: export clk_fixed_rate i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,12/41] clk: fixed_rate: add pre reloc flag i.MX8MM + CCF - - 1 - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,13/41] clk: imx: import clk heplers i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,14/41] clk: imx: gate2 add set rate i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,15/41] linux: compat: guard PAGE_SIZE i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,16/41] drivers: core: use strcmp when find device by name i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,17/41] ddr: imx8m: fix ddr firmware location when enable SPL OF i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,18/41] imx: add IMX8MQ kconfig entry i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,19/41] imx: add IMX8MM kconfig entry i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,20/41] imx: imx8mm: add clock bindings header i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,21/41] imx: add i.MX8MM cpu type i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,22/41] imx: spl: add spl_board_boot_device for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,23/41] imx8m: update imx-regs for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,24/41] imx: add get_cpu_rev support for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,25/41] imx8m: rename clock to clock_imx8mq i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,26/41] imx8m: restructure clock.h i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,27/41] imx8m: add clk support for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,28/41] imx8m: soc: probe clk before relocation i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,29/41] imx8m: add pin header for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,30/41] imx: add i.MX8MM PE property i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,31/41] imx8m: Fix MMU table issue for OPTEE memory i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,32/41] imx8m: set BYPASS ID SWAP to avoid AXI bus errors i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,33/41] imx8m: Configure trustzone region 0 for non-secure access i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,34/41] imx8m: soc: enable SCTR clock before timer init i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,35/41] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,36/41] clk: imx: add Kconfig entry for i.MX8MM i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,37/41] clk: imx: add pll14xx driver i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,38/41] clk: add composite clk support i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,39/41] clk: imx: add i.MX8MM composite clk support i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,40/41] clk: imx: add i.MX8MM clk driver i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot,i.MX8MM+CCF,41/41] imx: add i.MX8MM EVK board support i.MX8MM + CCF - - - - --- 2019-04-30 Peng Fan sbabic Superseded
[U-Boot] Pull request for mmc sub-system for v2019.07 [U-Boot] Pull request for mmc sub-system for v2019.07 - - - - --- 2019-05-04 Peng Fan trini Accepted
[U-Boot,V2,1/4] misc: imx8: add sc_misc_get_temp [U-Boot,V2,1/4] misc: imx8: add sc_misc_get_temp - - - - --- 2019-05-05 Peng Fan sbabic Accepted
[U-Boot,V2,2/4] thermal: add i.MX8 thermal driver [U-Boot,V2,1/4] misc: imx8: add sc_misc_get_temp - - - - --- 2019-05-05 Peng Fan sbabic Accepted
[U-Boot,V2,3/4] imx8: cpu: get temperature when print cpu desc [U-Boot,V2,1/4] misc: imx8: add sc_misc_get_temp - - - - --- 2019-05-05 Peng Fan sbabic Awaiting Upstream
[U-Boot,V2,4/4] imx: imx8dx/qxp: enable thermal [U-Boot,V2,1/4] misc: imx8: add sc_misc_get_temp - - - - --- 2019-05-05 Peng Fan sbabic Accepted
[U-Boot,1/6] imx: mach-imx: clean up Makefile imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
[U-Boot,2/6] spl: Add function to get u-boot raw sector imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
[U-Boot,3/6] imx8: support parsing i.MX8 Container file imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
[U-Boot,4/6] spl: mmc: support loading i.MX container format file imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
[U-Boot,5/6] imx: add container target imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
[U-Boot,6/6] imx8qxp_mek: switch to use container image imx8: support container - - - - --- 2019-05-07 Peng Fan sbabic Superseded
« 1 2 ... 673 674 675 … 1674 1675 »