Show patches with: Series = i.MX8MM + CCF       |    State = Action Required       |    Archived = No       |   41 patches
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[U-Boot,i.MX8MM+CCF,41/41] imx: add i.MX8MM EVK board support i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,40/41] clk: imx: add i.MX8MM clk driver i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,39/41] clk: imx: add i.MX8MM composite clk support i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,38/41] clk: add composite clk support i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,37/41] clk: imx: add pll14xx driver i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,36/41] clk: imx: add Kconfig entry for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,35/41] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,34/41] imx8m: soc: enable SCTR clock before timer init i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,33/41] imx8m: Configure trustzone region 0 for non-secure access i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,32/41] imx8m: set BYPASS ID SWAP to avoid AXI bus errors i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,31/41] imx8m: Fix MMU table issue for OPTEE memory i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,30/41] imx: add i.MX8MM PE property i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,29/41] imx8m: add pin header for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,28/41] imx8m: soc: probe clk before relocation i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,27/41] imx8m: add clk support for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,26/41] imx8m: restructure clock.h i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,25/41] imx8m: rename clock to clock_imx8mq i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,24/41] imx: add get_cpu_rev support for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,23/41] imx8m: update imx-regs for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,22/41] imx: spl: add spl_board_boot_device for i.MX8MM i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,21/41] imx: add i.MX8MM cpu type i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,20/41] imx: imx8mm: add clock bindings header i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,19/41] imx: add IMX8MM kconfig entry i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,18/41] imx: add IMX8MQ kconfig entry i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,17/41] ddr: imx8m: fix ddr firmware location when enable SPL OF i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,16/41] drivers: core: use strcmp when find device by name i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,15/41] linux: compat: guard PAGE_SIZE i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,14/41] clk: imx: gate2 add set rate i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,13/41] clk: imx: import clk heplers i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,12/41] clk: fixed_rate: add pre reloc flag i.MX8MM + CCF - - 1 - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,11/41] clk: fixed_rate: export clk_fixed_rate i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,10/41] divider set rate supporrt i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,09/41] clk: add clk-gate support i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,08/41] clk: export mux/divider ops i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,07/41] clk: mux: add set parent support i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,06/41] cmd: clk: print err value when clk_get_rate failed i.MX8MM + CCF - - 1 - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,05/41] clk-provider: sync more clk flags from Linux Kernel i.MX8MM + CCF - - 1 - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,04/41] clk: use clk_dev_binded i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,03/41] clk: introduce clk_dev_binded i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,02/41] clk: fixed-factor: fix get clk_fixed_factor i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK
[U-Boot,i.MX8MM+CCF,01/41] clk: correct get clk_x pointer i.MX8MM + CCF - - - - 0 0 0 2019-04-30 Peng Fan sbabic Needs Review / ACK