| [U-Boot,v2,2/9] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v3,12/12] board:smdk5250: switch to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,6/6] arm:trats: add support for new I2C framework |
2012-11-20 |
Piotr Wilczek |
hs |
New |
| [U-Boot,v2,5/6] drivers:i2c:s3c24x0: modify driver for new I2C framework |
2012-11-20 |
Piotr Wilczek |
hs |
New |
| [U-Boot,v3,10/12] samsung: trats2: add support for new board Trats2 |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,6/6] arm: trats: Use exynos4x10 structures on Trats board |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,5/6] Exynos: Exynos4x10: add sysreg structure for exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,4/6] Exynos: Exynos4x10: add power structure for Exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/6] Exynos: Exynos4x10: Add clock structure for exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/2] powerpc/c29xpcie: add support for C29XPCIE board |
2013-04-24 |
Po Liu |
afleming |
New |
| [U-Boot,1/2] powerpc/85xx: Add C29x SoC support |
2013-04-24 |
Po Liu |
afleming |
New |
| [U-Boot] powerpc/c29xpcie: add readme document for c29xpcie |
2013-05-16 |
Po Liu |
afleming |
New |
| [U-Boot] nand/fsl_ifc: Convert to self-init |
2013-04-05 |
Prabhakar Kushwaha |
scottwood |
New |
| [U-Boot] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL |
2013-05-07 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] board/b4860qds: Relax NOR flash teadc timing parameter |
2013-05-17 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,1/5,v5] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399 |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,5/5,v5] board/bsc9132qds:Add NAND boot support using new SPL format |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,4/5,v5] board/bsc9131rdb:Add NAND boot support using new SPL format |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,3/5,v5] board/p1010rdb:Add NAND boot support using new SPL format |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot,2/5,v5] powerpc/mpc85xx: new SPL support for IFC NAND |
2013-04-16 |
Prabhakar Kushwaha |
afleming |
New |
| [U-Boot] board/bsc9131rdb: Update default boot environment settings |
2013-04-04 |
Priyanka Jain |
afleming |
New |
| [U-Boot] board/bsc9131rdb: Add DSP side tlb and laws |
2013-04-04 |
Priyanka Jain |
afleming |
New |
| [U-Boot] board/bsc9131rdb: Add targets for Sysclk 100MHz |
2013-04-01 |
Priyanka Jain |
afleming |
New |
| [U-Boot] EXYNOS: Add API for power reset and shutdown |
2013-04-04 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/3,V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/3,V4] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 |
2013-03-21 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,2/3,V4] S5P: Rename GPIO definitions |
2013-03-21 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,1/3,V4] EXYNOS5: Add gpio pin numbering feature |
2013-03-21 |
Rajeshwari Shinde |
prom |
Under Review |
| [U-Boot,2/2,V2] EXYNOS: SPI: Support a delay after deactivate |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2,V2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] EXYNOS: SPI: Minimise access to SPI FIFO level |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4,V5] CONFIG: EXYNOS5: Enable silent console |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V5] S5P: Serial: Add fdt support to driver |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] EXYNOS: SPI: Support word transfers |
2013-03-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4] EXYNOS: Move files from board/samsung to arch/arm. |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4] EXYNOS4210: Configure GPIO for uart |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/3,V5] EXYNOS5: Add gpio pin numbering feature |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] EXYNOS: Move includes from setup.h to tzpc_init.c |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] EXYNOS: SPL: Add a custom spi copy function |
2013-03-27 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/3,V5] S5P: Rename GPIO definitions |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support a delay after deactivate |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2] SPI: Add support for preamble bytes |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4,V5] EXYNOS5: FDT: Add compatible strings for Serial |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/4] EXYNOS: LDS file move to common |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4] EXYNOS: Add API for power reset and exit wakeup |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] SPI: Winbond: Add W25Q32 to spi flash table |
2013-02-07 |
Rajeshwari Shinde |
trini |
New |
| [U-Boot,2/4,V4] EXYNOS5: FDT: Add serial device node values |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,4/4,V4] CONFIG: EXYNOS5: Enable silent console |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/4,V4] S5P: Serial: Add fdt support to driver |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4,V4] EXYNOS5: FDT: Add compatible strings for Serial |
2013-04-02 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] AT91: fix at91cap9 SoC files |
2011-08-03 |
Reinhard Meyer |
reinhardm |
Under Review |
| [U-Boot,2/2] mx6qsabreauto: Add Port Expander reset |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,01/10] ARM: move interrupt_init to before relocation |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,v2] pxe: try bootz if bootm fails to find a valid image |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,10/10] highbank: enable keyed autoboot stop |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,08/10] ARM: highbank: setup peripherals based on power domain status |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,09/10] pxe: add support for per arch and SoC default paths |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,07/10] ARM: highbank: enable reset on command timeout |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,06/10] ARM: highbank: avoid bss write in timer_init |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,07/10] pxe: simplify menu display and selection |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,04/10] ARM: highbank: fix get_tbclk value to timer rate |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,03/10] ARM: highbank: update config options |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,03/10] pxe: fix handling of different localboot values |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,01/10] pxe: Use ethact setting for pxe |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,10/10] pxe: add ipappend support |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,08/10] pxe: add support for ontimeout token |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,05/10] pxe: use bootz instead of bootm when enabled |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,04/10] bootz: un-staticize do_bootz |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,05/10] ARM: highbank: set timer prescaler to 256 |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,02/10] pxe: make string parameters const |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,06/10] pxe: always display a menu when present |
2012-12-03 |
Rob Herring |
jhersh |
New |
| [U-Boot,02/10] net: calxedaxgmac: enable rx cut-thru |
2013-05-15 |
Rob Herring |
aaribaud |
New |
| [U-Boot,5/5] Added command for validation of images in case of secure boot |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,4/5] FSL SEC Driver : Add support for descriptor creation |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,3/5] drivers/sec : Freescale SEC driver |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,2/5] powerpc/pamu : PAMU configuration for accessing SEC block |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot,1/5] arch/powerpc/cpu/mpc8xxx: PAMU driver support |
2013-03-28 |
Ruchika Gupta |
afleming |
New |
| [U-Boot] net: phy: supplement support for Micrel's KSZ9031 |
2013-04-30 |
SARTRE Leo |
jhersh |
New |
| [U-Boot,v6] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
New |
| [U-Boot,2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. |
2013-05-13 |
SARTRE Leo |
sbabic |
New |
| [U-Boot] nand/fsl_elbc: detect page size at runtime |
2013-02-26 |
Scott Wood |
scottwood |
New |
| [U-Boot,2/2] nand: remote biterr command stub |
2012-03-28 |
Scott Wood |
scottwood |
Under Review |
| [U-Boot,v2] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7 |
2013-05-18 |
Scott Wood |
|
New |
| [U-Boot] powerpc/mpc85xx: work around erratum A-006593 |
2013-05-15 |
Scott Wood |
afleming |
New |
| [U-Boot,2/2] corenet_ds: enable buffered reads |
2011-04-06 |
Scott Wood |
afleming |
New |
| [U-Boot,v3,05/10] block: mvsata: add dove include |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,01/10] ARM: dove: add support for Marvell Dove SoC |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,02/10] GPIO: add gpio driver for Orion SoCs |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,10/10] tools: Add support for Dove to kwboot |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,09/10] Boards: Add support for SolidRun CuBox |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,04/10] SPI: Add Orion SPI driver |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,03/10] MMC: sdhci: Add support for dove sdhci |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,08/10] NET: mvgbe: add support for Dove |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |
| [U-Boot,v3,07/10] NET: mvgbe: add phylib support |
2013-01-16 |
Sebastian Hesselbarth |
prafulla@marvell.com |
New |