| [U-Boot,v3,06/12] drivers:power:power_i2c: adapt file to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v5,04/11] serial: Use a more precise baud rate generation for serial_s3c24x0 |
2012-09-21 |
José Miguel Gonçalves |
prom |
New |
| [U-Boot,v5,02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs |
2012-09-21 |
José Miguel Gonçalves |
prom |
New |
| [U-Boot,2/2,V2] EXYNOS: SPI: Support a delay after deactivate |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,1/2] smdk5250: move board specific options to board specific config file |
2013-02-26 |
Inderpal Singh |
prom |
New |
| [U-Boot,v2,2/2] Exynos5: Arndale: Add support for exynos5250 based arndale board. |
2013-02-26 |
Inderpal Singh |
prom |
New |
| [U-Boot,5/5] exynos: config: Reflect the name changes of I2C TPM configs |
2013-04-12 |
Simon Glass |
prom |
New |
| [U-Boot,2/4,V5] EXYNOS5: FDT: Add serial device node values |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/6] Exynos: Exynos4x10: Add gpio structure for Exynos4X10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,1/4,V5] EXYNOS5: FDT: Add compatible strings for Serial |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/2,V2] EXYNOS: Export timer_get_us() to get microsecond timer |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,04/12] i2c:multi_i2c: adapt file to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v3,10/12] samsung: trats2: add support for new board Trats2 |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v3,02/12] drivers:power:max77693: add support for new multi function pmic max77693 |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot] i2c: add NACK logic in write |
2013-03-25 |
Akshay Saraswat |
prom |
New |
| [U-Boot] EXYNOS: SPI: Minimise access to SPI FIFO level |
2013-03-22 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,01/12] pmic:max77686: add function to set voltage and mode |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v3,11/12] board:VCMA9 switch to ne i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v3,1/2] EXYNOS4: Add pinmux support for UART |
2012-12-20 |
Jeong-Hyeon Kim |
prom |
Under Review |
| [U-Boot,4/4,V5] CONFIG: EXYNOS5: Enable silent console |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,v3,09/12] drivers:lcd: fix unaligned access on lcd |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/4] EXYNOS: LDS file move to common |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] EXYNOS: SPL: Add a custom spi copy function |
2013-03-27 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,2/3] exynos5250: move board specific configs to board specific config file |
2013-03-26 |
Inderpal Singh |
prom |
New |
| [U-Boot,v5,01/11] Add configuration option to select printf() inclusion on SPL |
2012-09-21 |
José Miguel Gonçalves |
prom |
New |
| [U-Boot,1/3] exynos5250: remove redundant SPI related configs |
2013-03-26 |
Inderpal Singh |
prom |
New |
| [U-Boot,v3,12/12] board:smdk5250: switch to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot] video: exynos: Change mipi dsi write function parameters correctly |
2013-05-08 |
Donghwa Lee |
prom |
New |
| [U-Boot,V7,10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C |
2013-03-05 |
Amar |
prom |
Under Review |
| [U-Boot,1/6] Exynos: Exynos4x10: Add base addresses for Exynos4x10 |
2012-10-12 |
Piotr Wilczek |
prom |
New |
| [U-Boot,3/4,v2] smdk5250: enable support for tmu throttling |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,4/4,v2] Exynos5: config: enable cpu freq |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot] spl: exynos: make spl_boot common for all exynos based platforms |
2013-03-16 |
Inderpal Singh |
prom |
Under Review |
| [U-Boot,1/4,v2] PMIC: max77686: add pmic_set_voltage api for max77686 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot,1/4] EXYNOS: Add API for power reset and exit wakeup |
2013-04-25 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot] video: exynos_fb: Add the missing #else clause |
2013-04-04 |
Ajay Kumar |
prom |
New |
| [U-Boot,2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register |
2013-04-05 |
Naveen Krishna Ch |
prom |
New |
| [U-Boot] exynos: Adjust the starting MIF voltage to 1.05v |
2013-04-15 |
Bernie Thompson |
prom |
New |
| [U-Boot,v3,3/3] exynos: Update origen and smdkv310 to use common tzpc_init |
2013-04-05 |
Inderpal Singh |
prom |
New |
| [U-Boot,v2,7/9] drivers:lcd: fix unaligned access on lcd |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,6/9] drivers:video:s6e8ax0: change data_to_send array to static |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,4/9] i2c:multi_i2c: add new macros I2C_7 and I2C_10 |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,3/9] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,v2,1/9] pmic:max77686: add function to set voltage and mode |
2013-04-04 |
Piotr Wilczek |
prom |
New |
| [U-Boot,2/4,v2] Exynos5: cpufreq: Implement frequency scaling for exynos5 |
2013-05-13 |
Akshay Saraswat |
prom |
New |
| [U-Boot] EXYNOS: Add API for power reset and shutdown |
2013-04-04 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,V1,1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C |
2013-04-04 |
Amar |
prom |
New |
| [U-Boot,3/4,V5] S5P: Serial: Add fdt support to driver |
2013-05-17 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,3/3,V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 |
2013-04-03 |
Rajeshwari Shinde |
prom |
New |
| [U-Boot,1/4] pmic: max77686: add pmic_set_voltage api for max77686 |
2013-04-03 |
Akshay Saraswat |
prom |
New |
| [U-Boot,v3,07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework |
2013-05-17 |
Piotr Wilczek |
prom |
New |
| [U-Boot] AT91: Defer Dataflash access to env_relocate_spec |
2011-08-03 |
Xu, Hong |
reinhardm |
Under Review |
| [U-Boot] AT91: fix at91cap9 SoC files |
2011-08-03 |
Reinhard Meyer |
reinhardm |
Under Review |
| [U-Boot] at91rm9200ek.h: explicitly disable D-Cache |
2011-08-31 |
Andreas Bießmann |
reinhardm |
Under Review |
| [U-Boot,2/2] spi: mxc_spi: Update pre and post divider algorithm |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v2,1/2] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-09 |
Dirk Behme |
sbabic |
New |
| [U-Boot,3/6] README: mx28_common: Fix structure of sentence |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,2/6] README: mx28_common: Do not hardcode the SSP port |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] spi: mxc_spi: Fix pre and post divider calculation |
2013-05-02 |
Dirk Behme |
sbabic |
New |
| [U-Boot,1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,2/2] mx6qsabreauto: Add Port Expander reset |
2013-05-14 |
Renato Frias |
sbabic |
Under Review |
| [U-Boot,v2] spi: mxc_spi: Set master mode for all channels |
2013-05-01 |
Dirk Behme |
sbabic |
New |
| [U-Boot,v6] Add support for Congatec Conga-QEVAl board |
2013-05-16 |
SARTRE Leo |
sbabic |
New |
| [U-Boot,2/2] Add instruction file (based on the README for the sabrelite) for booting the Congatec board from SD-Card. |
2013-05-13 |
SARTRE Leo |
sbabic |
New |
| [U-Boot] arm: mxs: Fix vectoring table crafting |
2013-04-26 |
Marek Vasut |
sbabic |
New |
| [U-Boot] mx6: Fix the reading of CPU revision |
2013-03-26 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,v2,2/2] imx: Add support for the SabreSD shipped with i.MX6DL |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot,v2,1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo |
2013-04-22 |
Pierre Aubert |
sbabic |
Under Review |
| [U-Boot,2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs |
2012-02-22 |
Stefano Babic |
sbabic |
New |
| [U-Boot] FEC: Rework RX buffer init |
2012-10-09 |
Marek Vasut |
sbabic |
New |
| [U-Boot,V4,3/8] imx: fec: Resolve speed before configuring gasket |
2012-04-19 |
Timo Ketola |
sbabic |
New |
| [U-Boot] mx23: Add a README file |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot] i.MX6: consolidate pad names for multi-CPU boards |
2013-02-14 |
Eric Nelson |
sbabic |
New |
| [U-Boot,4/6] README: mxs: Introduce README.mxs |
2013-05-03 |
Fabio Estevam |
sbabic |
New |
| [U-Boot,v3,07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support |
2013-04-26 |
Kuo-Jung Su |
scottwood |
New |
| [U-Boot,2/2] nand: remote biterr command stub |
2012-03-28 |
Scott Wood |
scottwood |
Under Review |
| [U-Boot] mtd: nand: fix the partial page write condition |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot] nand/fsl_elbc: detect page size at runtime |
2013-02-26 |
Scott Wood |
scottwood |
New |
| [U-Boot,v3,1/2] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT |
2013-02-26 |
Fabio Estevam |
scottwood |
New |
| [U-Boot] mtd: nand: fix the written length when nand_write_skip_bad failed |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot,v3,2/2] mtd: nand: mxc_nand: Fix is_16bit_nand() |
2013-02-26 |
Fabio Estevam |
scottwood |
New |
| [U-Boot,1/1] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
New |
| [U-Boot] nand: adjust erase/read/write partition/chip size for bad blocks |
2013-02-27 |
Harvey Chapman |
scottwood |
New |
| [U-Boot] cmd_nand: add biterror insertion command for NAND Flash |
2012-01-04 |
Holger Brunck |
scottwood |
Under Review |
| [U-Boot] nand/fsl_ifc: Convert to self-init |
2013-04-05 |
Prabhakar Kushwaha |
scottwood |
New |
| [U-Boot] mtd: nand: use ssize_t instead of size_t to prevent infinite loop |
2013-03-02 |
htbegin |
scottwood |
New |
| [U-Boot,2/2] buildman: Produce a sensible error message when branch is missing |
2013-05-03 |
Simon Glass |
sjg |
New |
| [U-Boot] sandbox: block driver using host file/device as backing store |
2013-05-14 |
Henrik Nordström |
sjg |
New |
| [U-Boot,1/1] TPM: STMicroelectronics u-boot driver I2C |
2013-05-15 |
Mathias leblanc |
sjg |
New |
| [U-Boot,v2,07/16] x86: Replace timer implementation with TSC timer |
2013-04-26 |
Simon Glass |
sjg |
New |
| [U-Boot,v1,3/3] blackfin: Uart divisor should be set after their values are generated. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v1,2/3] blackfin: Add memory virtual console to blackfin serial driver. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,1/2] blackfin: bf609: implement soft switch |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,v2,2/2] blackfin: bf609: add softswitch config command |
2013-05-13 |
Zhang, Sonic |
sonicz |
New |
| [U-Boot,v1,1/3] blackfin: Enable early print via the generic serial API. |
2013-05-13 |
Sonic Zhang |
sonicz |
New |
| [U-Boot,01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA |
2013-04-22 |
Dirk Eibach |
stroese |
New |