Patchwork U-Boot

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 10 11 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[U-Boot,v1,03/12] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,04/12] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,05/12] arm: mvebu: Disable MMU before changing register base address 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,06/12] arm: mvebu: Disable L2 cache before enabling d-cache 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,07/12] Makefile: Fix mvebu build target to use SPL load and exe-address 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,08/12] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,09/12] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,10/12] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,11/12] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,12/12] arm: mvebu: db-88f6820: Add SPL support with DDR init code 0 0 0 2015-06-03 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,1/9] mmc: sdhci: Use timer based timeout detection in sdhci_send_command() 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,2/9] mmc: sdhci.c: Add config option to use a fixed buffer for transfers 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,3/9] arm: mvebu: Add SDIO/SDHCI support for Armada A38x 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,4/9] arm: mvebu: db-88f6820-gp: Add MMC/SDIO support 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,5/9] block: ahci: Don't enable port interrupts 0 1 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,6/9] arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,7/9] arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) support 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,8/9] usb: Add EHCI support for Armada 38x (mvebu) 0 1 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot,v1,9/9] arm: mvebu: db-88f6820-gp: Add USB/EHCI support 0 0 0 2015-06-29 Stefan Roese prafulla@marvell.com New
[U-Boot] arm: mvebu: db-88f6820-gp: Add MAINTAINERS file 0 0 0 2015-07-01 Stefan Roese prafulla@marvell.com New
[U-Boot] arm: mvebu: Call timer_init early before PHY and DDR init 0 0 1 2015-07-15 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,01/11] arm: mvebu: Use default reg base address for SPL on A38x 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,02/11] arm: mvebu: spl.c: Add call to board_early_init_f() 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,03/11] arm: mvebu: Disable MMU before changing register base address 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,04/11] Makefile: Fix mvebu build target to use SPL load and exe-address 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,05/11] arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,06/11] arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,07/11] arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,08/11] arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,09/11] arm: mvebu: Call timer_init early before PHY and DDR init 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,10/11] arm: mvebu: a38x: Use correct PEX register access macros 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,v2,11/11] arm: mvebu: db-88f6820: Add SPL support with DDR init code 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,2/5] kwbimage: Add support for SDIO/MMC boot device selection 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,3/5] kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot,5/5] arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support 0 0 0 2015-07-20 Stefan Roese prafulla@marvell.com New
[U-Boot] usb: ehci-marvell: Drop wrl accessor function 0 0 0 2015-07-22 Stefan Roese prafulla@marvell.com New
[U-Boot,01/10] arm: marvell: Increase MAXARGS to 32 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,02/10] arm: mvebu: Change MBUS base addresses and sizes 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,03/10] arm: mvebu: Setup the MBUS bridge registers 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,04/10] arm: mvebu: Flush caches and disable MMU only on A38x 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,05/10] arm: mvebu: Disable MBUS error propagation 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,10/10] arm: mvebu: db-mv785mp-gp: Add USB/EHCI support 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,05/10,v2] arm: mvebu: Disable MBUS error propagation 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,07/10,v2] arm: mvebu: Enable NAND controller on MVEBU SoC's 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot,09/10,v2] arm: mvebu: Enable USB EHCI support on Armada XP 0 0 0 2015-07-23 Stefan Roese prafulla@marvell.com New
[U-Boot] arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INIT 0 0 0 2015-08-06 Stefan Roese prafulla@marvell.com New
[U-Boot,1/5] arm: mvebu: sdram: Enable ECC support on Armada XP 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,2/5] arm: mvebu: Display ECC enabled / disabled upon bootup 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,3/5] arm: mvebu: Move CONFIG_SYS_TEXT_BASE to an address < 16 MiB 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,4/5] arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize() 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,5/5] arm: mvebu: Add complete SDRAM ECC scrubbing 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,1/3] pci: mvebu: Add PCIe driver 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,2/3] arm: mvebu: db-mv784mp-gp: Enable PCI support 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot,3/3] arm: mvebu: db-88f6820-gp: Enable PCI support 0 0 0 2015-08-11 Stefan Roese prafulla@marvell.com New
[U-Boot] arm: mvebu: Fix internal register config on A38x 0 0 0 2015-08-24 Stefan Roese prafulla@marvell.com New
[U-Boot,1/3] arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file 0 0 0 2015-08-25 Stefan Roese prafulla@marvell.com New
[U-Boot,2/3] arm: mvebu: Add option to use UART xmodem protocol via kwboot 0 0 1 2015-08-25 Stefan Roese prafulla@marvell.com New
[U-Boot,3/3] arm: mvebu: Only set CONFIG_SKIP_LOWLEVEL_INIT for SPL 0 0 0 2015-08-25 Stefan Roese prafulla@marvell.com New
[U-Boot,v3,0/4] sunxi: nand: Basic NAND driver for SPL 0 0 0 2015-08-27 Stefan Roese jwrdegoede New
[U-Boot] Don't wrap to negative after 2G sectors 0 0 0 2015-08-25 Stefan Monnier trini New
[U-Boot,1/2] net: reject Bootp/DHCP packets with bad OP value 0 0 0 2015-08-27 Stefan Brüns jhersh New
[U-Boot,2/2] net: send RFC1542 compliant value for bootp requests 0 0 0 2015-08-27 Stefan Brüns jhersh New
[U-Boot] net: Fix parsing of Bootp/DHCP option 0 (Pad) 0 0 0 2015-08-28 Stefan Brüns jhersh New
[U-Boot,1/2] net: Do not overwrite options found in overloaded 'file' field 0 0 0 2015-08-28 Stefan Brüns jhersh New
[U-Boot,2/2] net: parse DHCP options from overloaded file/sname fields 0 0 0 2015-08-28 Stefan Brüns jhersh New
[U-Boot] Sheevaplug: Add Kirkwood watchdog support 0 0 0 2012-03-28 Stathis Voukelatos prafulla@marvell.com Under Review
[U-Boot] rtc: ds1307: add support for MCP7941x RTCs 0 0 0 2014-11-27 Soeren Moch trini New
[U-Boot,1/3] tbs2910: use full name in Kconfig board selection 0 0 0 2015-08-13 Soeren Moch sbabic New
[U-Boot,2/3] tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONS 0 0 0 2015-08-13 Soeren Moch sbabic New
[U-Boot,3/3] tbs2910: remove SYS_SOC from board specific Kconfig 0 0 0 2015-08-13 Soeren Moch sbabic New
[U-Boot,1/8] doc: Fix reference to Rock pro when Rock 2 is meant 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,2/8] mmc: Probe DM based mmc devices in u-boot 0 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,3/8] rockchip: Disable sdio mmc slot on rk3288-firefly 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,5/8] rockchip: Add config_distro_bootcmd support 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,6/8] arm: Turn of d-cache before i-cache 0 1 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,7/8] rockchip: Drop first 32kb of zeros from the rksd image type 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,8/8] rockchip: Update todo in README.rockchip 1 0 0 2015-08-16 Sjoerd Simons sjg New
[U-Boot,1/3] config_distro_bootcmd.h: Use a private variable for bootpart 1 0 0 2015-08-28 Sjoerd Simons trini New
[U-Boot,2/3] configs: ti_armv7_common.h: Add default addresses for pxe and scripts 0 0 0 2015-08-28 Sjoerd Simons trini New
[U-Boot,3/3] configs: am335x_evm: Support distro bootcmds 0 0 0 2015-08-28 Sjoerd Simons trini New
[U-Boot,1/4] zynqmp: Kconfig: Move zynqmp Kconfig 0 0 0 2015-06-10 Siva Durga Prasad Paladugu monstr New
[U-Boot,2/4] zynqmp: Define ep config for ZynqMP 0 0 0 2015-06-10 Siva Durga Prasad Paladugu monstr New
[U-Boot,3/4] Kconfig: zynqMP: Move CONFIG_SYS_TEXT_BASE to defconfig 0 0 0 2015-06-10 Siva Durga Prasad Paladugu monstr New
[U-Boot,4/4] zynqmp: Provide option to enable uart dcc support for zynqmp 0 0 0 2015-06-10 Siva Durga Prasad Paladugu monstr New
[U-Boot] board: Xilinx: zynqmp: Define checkboard() function 0 0 0 2015-08-04 Siva Durga Prasad Paladugu monstr New
[U-Boot,1/3] zynqmp: usb: Add usb dwc3 driver support for zynqmp 0 0 0 2015-08-04 Siva Durga Prasad Paladugu monstr New
[U-Boot,2/3] usb: zynqmp: Add XHCI driver support 0 0 0 2015-08-04 Siva Durga Prasad Paladugu monstr New
[U-Boot,3/3] usb: zynqmp: Enable USB XHCI support 0 0 0 2015-08-04 Siva Durga Prasad Paladugu monstr New
[U-Boot,v3,2/5] Make 'run' use run_command_list() instead of run_command() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,3/5] Allow U-Boot scripts to be placed in a .env file 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,4/5] env: Allow environment files to use the C preprocessor 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v3,5/5] RFC: tegra: Convert to using environment files 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,1/8] Implement autoconf header file 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,2/8] main: Use autoconf for boot retry feature 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,3/8] main: Remove CONFIG #ifdefs from the abortboot() code 0 1 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,4/8] main: Use autoconf to remove #ifdefs around process_boot_delay() 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,5/8] main: Use autoconf for boot_delay code 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,6/8] main: Use autoconf for parser selection 0 0 0 2013-10-26 Simon Glass trini New
[U-Boot,v4,7/8] main: Use autoconf in command line reading 0 1 0 2013-10-26 Simon Glass trini New