diff mbox series

[v1,2/8] pinctrl: cannonlake: Provide Interrupt Status register offset

Message ID 20190723155633.65232-2-andriy.shevchenko@linux.intel.com
State New
Headers show
Series [v1,1/8] pinctrl: broxton: Provide Interrupt Status register offset | expand

Commit Message

Andy Shevchenko July 23, 2019, 3:56 p.m. UTC 
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-cannonlake.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c
index 08024b065033..f51b27bbf9f1 100644
--- a/drivers/pinctrl/intel/pinctrl-cannonlake.c
+++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c
@@ -19,6 +19,7 @@ 
 #define CNL_PADCFGLOCK		0x080
 #define CNL_LP_HOSTSW_OWN	0x0b0
 #define CNL_H_HOSTSW_OWN	0x0c0
+#define CNL_GPI_IS		0x100
 #define CNL_GPI_IE		0x120
 
 #define CNL_GPP(r, s, e, g)				\
@@ -37,6 +38,7 @@ 
 		.padown_offset = CNL_PAD_OWN,		\
 		.padcfglock_offset = CNL_PADCFGLOCK,	\
 		.hostown_offset = (o),			\
+		.is_offset = CNL_GPI_IS,		\
 		.ie_offset = CNL_GPI_IE,		\
 		.pin_base = (s),			\
 		.npins = ((e) - (s) + 1),		\