Message ID | 49EDC0BE.7040505@elphinstone.net (mailing list archive) |
---|---|
State | Accepted, archived |
Delegated to: | Kumar Gala |
Headers | show |
On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: > Recent DMA changes result in a BUG() when NULL is passed to > dma_alloc_coherent in place of a device. > > Signed-off-by: Mark Ware <mware@elphinstone.net> > --- > > This patch fixes the BUG() during boot that has appeared during the > 2.6.30 window. It has been tested and appears correct on my 8280 based > board. > Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it > belongs. > > > drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ > 1 files changed, 8 insertions(+), 6 deletions(-) Acked-by: Kumar Gala <galak@kernel.crashing.org> Ben, I'm expecting you to pick this up unless you tell me otherwise. - k
On Tue, Apr 21, 2009 at 10:11:51AM -0500, Kumar Gala wrote: > > On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: > > >Recent DMA changes result in a BUG() when NULL is passed to > >dma_alloc_coherent in place of a device. > > > >Signed-off-by: Mark Ware <mware@elphinstone.net> > >--- > > > >This patch fixes the BUG() during boot that has appeared during the > >2.6.30 window. It has been tested and appears correct on my 8280 based > >board. > >Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it > >belongs. > > > > > >drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ > >1 files changed, 8 insertions(+), 6 deletions(-) > > Acked-by: Kumar Gala <galak@kernel.crashing.org> > > Ben, I'm expecting you to pick this up unless you tell me otherwise. Yes.
On Apr 22, 2009, at 4:56 PM, Ben Dooks wrote: > On Tue, Apr 21, 2009 at 10:11:51AM -0500, Kumar Gala wrote: >> >> On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: >> >>> Recent DMA changes result in a BUG() when NULL is passed to >>> dma_alloc_coherent in place of a device. >>> >>> Signed-off-by: Mark Ware <mware@elphinstone.net> >>> --- >>> >>> This patch fixes the BUG() during boot that has appeared during the >>> 2.6.30 window. It has been tested and appears correct on my 8280 >>> based >>> board. >>> Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it >>> belongs. >>> >>> >>> drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ >>> 1 files changed, 8 insertions(+), 6 deletions(-) >> >> Acked-by: Kumar Gala <galak@kernel.crashing.org> >> >> Ben, I'm expecting you to pick this up unless you tell me otherwise. > > Yes. This go in yet? - k
On Wed, Apr 29, 2009 at 08:43:14AM -0500, Kumar Gala wrote: > > On Apr 22, 2009, at 4:56 PM, Ben Dooks wrote: > >> On Tue, Apr 21, 2009 at 10:11:51AM -0500, Kumar Gala wrote: >>> >>> On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: >>> >>>> Recent DMA changes result in a BUG() when NULL is passed to >>>> dma_alloc_coherent in place of a device. >>>> >>>> Signed-off-by: Mark Ware <mware@elphinstone.net> >>>> --- >>>> >>>> This patch fixes the BUG() during boot that has appeared during the >>>> 2.6.30 window. It has been tested and appears correct on my 8280 >>>> based >>>> board. >>>> Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it >>>> belongs. >>>> >>>> >>>> drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ >>>> 1 files changed, 8 insertions(+), 6 deletions(-) >>> >>> Acked-by: Kumar Gala <galak@kernel.crashing.org> >>> >>> Ben, I'm expecting you to pick this up unless you tell me otherwise. >> >> Yes. > > This go in yet? I've had to do a manual apply due to some changes in the driver, so can someone please do a build of my git tree at: git://aeryn.fluff.org.uk/bjdooks/linux.git i2c-for-2630-rc5 or tell me which arch and defconfig to build.
Ben Dooks wrote: > On Wed, Apr 29, 2009 at 08:43:14AM -0500, Kumar Gala wrote: >> On Apr 22, 2009, at 4:56 PM, Ben Dooks wrote: >> >>> On Tue, Apr 21, 2009 at 10:11:51AM -0500, Kumar Gala wrote: >>>> On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: >>>> >>>>> Recent DMA changes result in a BUG() when NULL is passed to >>>>> dma_alloc_coherent in place of a device. >>>>> >>>>> Signed-off-by: Mark Ware <mware@elphinstone.net> >>>>> --- >>>>> >>>>> This patch fixes the BUG() during boot that has appeared during the >>>>> 2.6.30 window. It has been tested and appears correct on my 8280 >>>>> based >>>>> board. >>>>> Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it >>>>> belongs. >>>>> >>>>> >>>>> drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ >>>>> 1 files changed, 8 insertions(+), 6 deletions(-) >>>> Acked-by: Kumar Gala <galak@kernel.crashing.org> >>>> >>>> Ben, I'm expecting you to pick this up unless you tell me otherwise. >>> Yes. >> This go in yet? > > I've had to do a manual apply due to some changes in the > driver, so can someone please do a build of my git tree > at: > > git://aeryn.fluff.org.uk/bjdooks/linux.git i2c-for-2630-rc5 > > or tell me which arch and defconfig to build. > Ping. Is there anything still blocking this? Mark Ware
On Mon, May 11, 2009 at 02:28:50PM +1000, Mark Ware wrote: > Ben Dooks wrote: >> On Wed, Apr 29, 2009 at 08:43:14AM -0500, Kumar Gala wrote: >>> On Apr 22, 2009, at 4:56 PM, Ben Dooks wrote: >>> >>>> On Tue, Apr 21, 2009 at 10:11:51AM -0500, Kumar Gala wrote: >>>>> On Apr 21, 2009, at 7:49 AM, Mark Ware wrote: >>>>> >>>>>> Recent DMA changes result in a BUG() when NULL is passed to >>>>>> dma_alloc_coherent in place of a device. >>>>>> >>>>>> Signed-off-by: Mark Ware <mware@elphinstone.net> >>>>>> --- >>>>>> >>>>>> This patch fixes the BUG() during boot that has appeared during the >>>>>> 2.6.30 window. It has been tested and appears correct on my >>>>>> 8280 based >>>>>> board. >>>>>> Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it >>>>>> belongs. >>>>>> >>>>>> >>>>>> drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ >>>>>> 1 files changed, 8 insertions(+), 6 deletions(-) >>>>> Acked-by: Kumar Gala <galak@kernel.crashing.org> >>>>> >>>>> Ben, I'm expecting you to pick this up unless you tell me otherwise. >>>> Yes. >>> This go in yet? >> >> I've had to do a manual apply due to some changes in the >> driver, so can someone please do a build of my git tree >> at: >> >> git://aeryn.fluff.org.uk/bjdooks/linux.git i2c-for-2630-rc5 >> >> or tell me which arch and defconfig to build. >> > > Ping. Is there anything still blocking this? sorry, have been ill recently, will get this sorted and pushed.
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 3fcf78e..83276d2 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -532,7 +532,8 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) for (i = 0; i < CPM_MAXBD; i++) { cpm->rxbuf[i] = dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + &cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->rxdma[i], + GFP_KERNEL); if (!cpm->rxbuf[i]) { ret = -ENOMEM; goto out_muram; @@ -540,7 +541,8 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + &cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], + GFP_KERNEL); if (!cpm->txbuf[i]) { ret = -ENOMEM; goto out_muram; @@ -585,10 +587,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) out_muram: for (i = 0; i < CPM_MAXBD; i++) { if (cpm->rxbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); if (cpm->txbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } cpm_muram_free(cpm->dp_addr); @@ -619,9 +621,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm) /* Free all memory */ for (i = 0; i < CPM_MAXBD; i++) { - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); }
Recent DMA changes result in a BUG() when NULL is passed to dma_alloc_coherent in place of a device. Signed-off-by: Mark Ware <mware@elphinstone.net> --- This patch fixes the BUG() during boot that has appeared during the 2.6.30 window. It has been tested and appears correct on my 8280 based board. Sent to both linuxppc-dev and linux-i2c, since I'm not sure where it belongs. drivers/i2c/busses/i2c-cpm.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-)