| Message ID | 1378882109-8608-1-git-send-email-shh.xie@gmail.com |
|---|---|
| State | Accepted |
| Delegated to: | York Sun |
| Headers | show |
On 09/10/2013 11:48 PM, shh.xie@gmail.com wrote: > From: Shaohui Xie <Shaohui.Xie@freescale.com> > > Previous process of compiling a PBL boot image is: > 1: make <board_name_config> > 2: make u-boot.pbl > > for example: > make T4240QDS_SDCARD_config > make u-boot.pbl > > Now the process is: > 1: make <board_name> > > for example: > make T4240QDS_SDCARD > > Also, updated README.pblimage. > > Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> > --- > Makefile | 1 + > doc/README.pblimage | 15 ++++++--------- > 2 files changed, 7 insertions(+), 9 deletions(-) > > diff --git a/Makefile b/Makefile > index 8aa8039..9ae1719 100644 > --- a/Makefile > +++ b/Makefile > @@ -397,6 +397,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map > > ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin > ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin > +ALL-$(CONFIG_RAMBOOT_PBL) += $(obj)u-boot.pbl > ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin > ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.img > ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin > diff --git a/doc/README.pblimage b/doc/README.pblimage > index 2b9bb5c..7fdd26b 100644 > --- a/doc/README.pblimage > +++ b/doc/README.pblimage > @@ -14,20 +14,17 @@ Building PBL Boot Image and boot steps > 1. Building PBL Boot Image. > The default Image is u-boot.pbl. > > - For eSPI boot(available on P3041/P4080/P5020): > + For eSPI boot(available on P2041/P3041/P4080/P5020/P5040/T4240): > To build the eSPI boot image: > - make <board_name>_SPIFLASH_config > - make u-boot.pbl > + make <board_name>_SPIFLASH > > - For SD boot(available on P3041/P4080/P5020): > + For SD boot(available on P2041/P3041/P4080/P5020/P5040/T4240): > To build the SD boot image: > - make <board_name>_SDCARD_config > - make u-boot.pbl > + make <board_name>_SDCARD > > - For Nand boot(available on P3041/P5020): > + For Nand boot(available on P2041/P3041/P5020/P5040): > To build the NAND boot image: > - make <board_name>_NAND_config > - make u-boot.pbl > + make <board_name>_NAND > > > 2. pblimage support available with mkimage utility will generate Freescale PBL > Tom, Can I get your ack since this patch changes Makefile? York
On 09/10/2013 11:48 PM, shh.xie@gmail.com wrote: > From: Shaohui Xie <Shaohui.Xie@freescale.com> > > Previous process of compiling a PBL boot image is: > 1: make <board_name_config> > 2: make u-boot.pbl > > for example: > make T4240QDS_SDCARD_config > make u-boot.pbl > > Now the process is: > 1: make <board_name> > > for example: > make T4240QDS_SDCARD > > Also, updated README.pblimage. > > Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> > --- Applied to u-boot-mpc85xx/next, pending merging to u-boot-mpc85xx/master branch. York
diff --git a/Makefile b/Makefile index 8aa8039..9ae1719 100644 --- a/Makefile +++ b/Makefile @@ -397,6 +397,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin +ALL-$(CONFIG_RAMBOOT_PBL) += $(obj)u-boot.pbl ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.img ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin diff --git a/doc/README.pblimage b/doc/README.pblimage index 2b9bb5c..7fdd26b 100644 --- a/doc/README.pblimage +++ b/doc/README.pblimage @@ -14,20 +14,17 @@ Building PBL Boot Image and boot steps 1. Building PBL Boot Image. The default Image is u-boot.pbl. - For eSPI boot(available on P3041/P4080/P5020): + For eSPI boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the eSPI boot image: - make <board_name>_SPIFLASH_config - make u-boot.pbl + make <board_name>_SPIFLASH - For SD boot(available on P3041/P4080/P5020): + For SD boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the SD boot image: - make <board_name>_SDCARD_config - make u-boot.pbl + make <board_name>_SDCARD - For Nand boot(available on P3041/P5020): + For Nand boot(available on P2041/P3041/P5020/P5040): To build the NAND boot image: - make <board_name>_NAND_config - make u-boot.pbl + make <board_name>_NAND 2. pblimage support available with mkimage utility will generate Freescale PBL