Message ID | 1330728909-12203-3-git-send-email-eric.nelson@boundarydevices.com |
---|---|
State | Rejected |
Headers | show |
> Allow non-dt kernels to boot > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 6 ++++-- > include/configs/mx6qsabrelite.h | 1 + > 2 files changed, 5 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 590030b..2786482 > 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -282,8 +282,10 @@ int board_early_init_f(void) > > int board_init(void) > { > - /* address of boot parameters */ > - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > + /* board id for linux */ > + gd->bd->bi_arch_number = MACH_TYPE_MX6Q_SABRELITE; > + /* address of boot parameters */ > + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > > return 0; > } > diff --git a/include/configs/mx6qsabrelite.h > b/include/configs/mx6qsabrelite.h index 85f6f7a..53869a9 100644 > --- a/include/configs/mx6qsabrelite.h > +++ b/include/configs/mx6qsabrelite.h > @@ -27,6 +27,7 @@ > #define CONFIG_SYS_MX6_CLK32 32768 > #define CONFIG_DISPLAY_CPUINFO > #define CONFIG_DISPLAY_BOARDINFO > +#define MACH_TYPE_MX6Q_SABRELITE 3769 Just use #define CONFIG_MACH_TYPE 3769 M
On 02/03/2012 23:55, Eric Nelson wrote: > Allow non-dt kernels to boot > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 6 ++++-- > include/configs/mx6qsabrelite.h | 1 + > 2 files changed, 5 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > index 590030b..2786482 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -282,8 +282,10 @@ int board_early_init_f(void) > > int board_init(void) > { > - /* address of boot parameters */ > - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; > + /* board id for linux */ > + gd->bd->bi_arch_number = MACH_TYPE_MX6Q_SABRELITE; You do not needed. This is done in common code. Add only CONFIG_MACH_TYPE in mx6qsabrelite.h Best regards, Stefano Babic
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 590030b..2786482 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -282,8 +282,10 @@ int board_early_init_f(void) int board_init(void) { - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_MX6Q_SABRELITE; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; return 0; } diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 85f6f7a..53869a9 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -27,6 +27,7 @@ #define CONFIG_SYS_MX6_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define MACH_TYPE_MX6Q_SABRELITE 3769 #include <asm/arch/imx-regs.h>
Allow non-dt kernels to boot Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 6 ++++-- include/configs/mx6qsabrelite.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-)