Message ID | 20220422173840.2260582-1-sean.anderson@seco.com |
---|---|
Headers | show |
Series | net: fm: Verify Fman microcode | expand |
On 4/22/22 1:38 PM, Sean Anderson wrote: > Surprisingly, Fman microcode does not seem to be verified. This series > aims to rectify this by introducing an optional FIT wrapper. This > wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not > use this config, so the microcode will remain unverified for them. This > is OK, since we do not want to break existing systems. > > This series depends on [1]. There is no logical dependency, but they > modify adjacent #includes, so the past patch will not apply cleanly > unless that series is applied. > > [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/ > > Changes in v2: > - Document helpers > - Split off Fman microcode verification patches into their own series > - Split helper refactoring into a patch adding the helpers and one patch > per subsystem. > > Sean Anderson (6): > ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME > image: fit: Add some helpers for getting data > ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop > cmd: fpga: Convert to use fit_get_data_node > net: Convert fit verification to use fit_get_data_* > net: fm: Add support for FIT firmware > > arch/arm/cpu/armv8/sec_firmware.c | 52 ++-------------------- > boot/image-fit.c | 37 ++++++++++++++++ > cmd/fpga.c | 24 +++------- > drivers/net/fm/fm.c | 18 ++++++++ > drivers/net/fsl-mc/mc.c | 30 ++----------- > drivers/net/pfe_eth/pfe_firmware.c | 40 +---------------- > include/image.h | 70 ++++++++++++++++++++++++++++++ > 7 files changed, 139 insertions(+), 132 deletions(-) > ping
On 4/23/2022 1:38 AM, Sean Anderson wrote: > Surprisingly, Fman microcode does not seem to be verified. This series > aims to rectify this by introducing an optional FIT wrapper. This > wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not > use this config, so the microcode will remain unverified for them. This > is OK, since we do not want to break existing systems. > > This series depends on [1]. There is no logical dependency, but they > modify adjacent #includes, so the past patch will not apply cleanly > unless that series is applied. > > [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/ > > Changes in v2: > - Document helpers > - Split off Fman microcode verification patches into their own series > - Split helper refactoring into a patch adding the helpers and one patch > per subsystem. > > Sean Anderson (6): > ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME > image: fit: Add some helpers for getting data > ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop > cmd: fpga: Convert to use fit_get_data_node > net: Convert fit verification to use fit_get_data_* > net: fm: Add support for FIT firmware Patch 6 failed to apply, could you please rebase? Thanks, Peng. > > arch/arm/cpu/armv8/sec_firmware.c | 52 ++-------------------- > boot/image-fit.c | 37 ++++++++++++++++ > cmd/fpga.c | 24 +++------- > drivers/net/fm/fm.c | 18 ++++++++ > drivers/net/fsl-mc/mc.c | 30 ++----------- > drivers/net/pfe_eth/pfe_firmware.c | 40 +---------------- > include/image.h | 70 ++++++++++++++++++++++++++++++ > 7 files changed, 139 insertions(+), 132 deletions(-) >
On 9/6/22 1:22 AM, Peng Fan wrote: > > > On 4/23/2022 1:38 AM, Sean Anderson wrote: >> Surprisingly, Fman microcode does not seem to be verified. This series >> aims to rectify this by introducing an optional FIT wrapper. This >> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not >> use this config, so the microcode will remain unverified for them. This >> is OK, since we do not want to break existing systems. >> >> This series depends on [1]. There is no logical dependency, but they >> modify adjacent #includes, so the past patch will not apply cleanly >> unless that series is applied. >> >> [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/ >> >> Changes in v2: >> - Document helpers >> - Split off Fman microcode verification patches into their own series >> - Split helper refactoring into a patch adding the helpers and one patch >> per subsystem. >> >> Sean Anderson (6): >> ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME >> image: fit: Add some helpers for getting data >> ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop >> cmd: fpga: Convert to use fit_get_data_node >> net: Convert fit verification to use fit_get_data_* >> net: fm: Add support for FIT firmware > > Patch 6 failed to apply, could you please rebase? Please try [1]. --Sean [1] https://lore.kernel.org/u-boot/20220816151607.1569660-1-sean.anderson@seco.com/#t
Hi Sean, On 9/6/2022 11:27 PM, Sean Anderson wrote: > > > On 9/6/22 1:22 AM, Peng Fan wrote: >> >> >> On 4/23/2022 1:38 AM, Sean Anderson wrote: >>> Surprisingly, Fman microcode does not seem to be verified. This series >>> aims to rectify this by introducing an optional FIT wrapper. This >>> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do not >>> use this config, so the microcode will remain unverified for them. This >>> is OK, since we do not want to break existing systems. >>> >>> This series depends on [1]. There is no logical dependency, but they >>> modify adjacent #includes, so the past patch will not apply cleanly >>> unless that series is applied. >>> >>> [1] https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/ >>> >>> Changes in v2: >>> - Document helpers >>> - Split off Fman microcode verification patches into their own series >>> - Split helper refactoring into a patch adding the helpers and one patch >>> per subsystem. >>> >>> Sean Anderson (6): >>> ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME >>> image: fit: Add some helpers for getting data >>> ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop >>> cmd: fpga: Convert to use fit_get_data_node >>> net: Convert fit verification to use fit_get_data_* >>> net: fm: Add support for FIT firmware >> >> Patch 6 failed to apply, could you please rebase? > > Please try [1]. > > --Sean > > [1] https://lore.kernel.org/u-boot/20220816151607.1569660-1-sean.anderson@seco.com/#t ➜ u-boot git:(fsl-qoriq-master) ✗ pwclient git-am 1666898 1666901 1666900 1666903 1666902 1666904 Applying patch #1666898 using 'git am' Description: [RESEND,v2,1/6] ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME Applying: ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME Applying patch #1666901 using 'git am' Description: [RESEND,v2,2/6] image: fit: Add some helpers for getting data Applying: image: fit: Add some helpers for getting data Applying patch #1666900 using 'git am' Description: [RESEND,v2,3/6] ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop Applying: ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop Applying patch #1666903 using 'git am' Description: [RESEND,v2,4/6] cmd: fpga: Convert to use fit_get_data_node Applying: cmd: fpga: Convert to use fit_get_data_node Applying patch #1666902 using 'git am' Description: [RESEND,v2,5/6] net: Convert fit verification to use fit_get_data_* Applying: net: Convert fit verification to use fit_get_data_* Applying patch #1666904 using 'git am' Description: [RESEND,v2,6/6] net: fm: Add support for FIT firmware Applying: net: fm: Add support for FIT firmware error: patch failed: drivers/net/fm/fm.c:6 error: drivers/net/fm/fm.c: patch does not apply Patch failed at 0001 net: fm: Add support for FIT firmware hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". 'git am' failed with exit status 128 Thanks, Peng.
On 9/7/2022 12:31 PM, Peng Fan wrote: > > Hi Sean, > > On 9/6/2022 11:27 PM, Sean Anderson wrote: >> >> >> On 9/6/22 1:22 AM, Peng Fan wrote: >>> >>> >>> On 4/23/2022 1:38 AM, Sean Anderson wrote: >>>> Surprisingly, Fman microcode does not seem to be verified. This series >>>> aims to rectify this by introducing an optional FIT wrapper. This >>>> wrapper is made mandatory if FIT_SIGNATURE is enabled. NXP boards do >>>> not >>>> use this config, so the microcode will remain unverified for them. This >>>> is OK, since we do not want to break existing systems. >>>> >>>> This series depends on [1]. There is no logical dependency, but they >>>> modify adjacent #includes, so the past patch will not apply cleanly >>>> unless that series is applied. >>>> >>>> [1] >>>> https://lore.kernel.org/u-boot/20220422173032.2259019-1-sean.anderson@seco.com/ >>>> >>>> Changes in v2: >>>> - Document helpers >>>> - Split off Fman microcode verification patches into their own series >>>> - Split helper refactoring into a patch adding the helpers and one >>>> patch >>>> per subsystem. >>>> >>>> Sean Anderson (6): >>>> ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME >>>> image: fit: Add some helpers for getting data >>>> ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop >>>> cmd: fpga: Convert to use fit_get_data_node >>>> net: Convert fit verification to use fit_get_data_* >>>> net: fm: Add support for FIT firmware >>> >>> Patch 6 failed to apply, could you please rebase? >> >> Please try [1]. >> >> --Sean >> >> [1] >> https://lore.kernel.org/u-boot/20220816151607.1569660-1-sean.anderson@seco.com/#t > > ➜ u-boot git:(fsl-qoriq-master) ✗ pwclient git-am 1666898 1666901 > 1666900 1666903 1666902 1666904 > Applying patch #1666898 using 'git am' > Description: [RESEND,v2,1/6] ARMv8/sec_firmware: Remove > SEC_FIRMWARE_FIT_CNF_NAME > Applying: ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME > Applying patch #1666901 using 'git am' > Description: [RESEND,v2,2/6] image: fit: Add some helpers for getting data > Applying: image: fit: Add some helpers for getting data > Applying patch #1666900 using 'git am' > Description: [RESEND,v2,3/6] ARMv8/sec_firmware: Convert to use > fit_get_data_conf_prop > Applying: ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop > Applying patch #1666903 using 'git am' > Description: [RESEND,v2,4/6] cmd: fpga: Convert to use fit_get_data_node > Applying: cmd: fpga: Convert to use fit_get_data_node > Applying patch #1666902 using 'git am' > Description: [RESEND,v2,5/6] net: Convert fit verification to use > fit_get_data_* > Applying: net: Convert fit verification to use fit_get_data_* > Applying patch #1666904 using 'git am' > Description: [RESEND,v2,6/6] net: fm: Add support for FIT firmware > Applying: net: fm: Add support for FIT firmware > error: patch failed: drivers/net/fm/fm.c:6 > error: drivers/net/fm/fm.c: patch does not apply > Patch failed at 0001 net: fm: Add support for FIT firmware > hint: Use 'git am --show-current-patch=diff' to see the failed patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort". > 'git am' failed with exit status 128 I fixed the conflict and applied this patchset to https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git: master If anything wrong, please raise. Thanks, Peng. > > Thanks, > Peng.