diff mbox series

[v4,6/8] bpf ppc64: Access only if addr is kernel address

Message ID 20210929111855.50254-7-hbathini@linux.ibm.com (mailing list archive)
State Superseded
Headers show
Series bpf powerpc: Add BPF_PROBE_MEM support in powerpc JIT compiler | expand
Related show

Commit Message

Hari Bathini Sept. 29, 2021, 11:18 a.m. UTC
From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

On PPC64 with KUAP enabled, any kernel code which wants to
access userspace needs to be surrounded by disable-enable KUAP.
But that is not happening for BPF_PROBE_MEM load instruction.
So, when BPF program tries to access invalid userspace address,
page-fault handler considers it as bad KUAP fault:

  Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)

Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
mode) could either be a valid kernel pointer or NULL but should
never be a pointer to userspace address, execute BPF_PROBE_MEM load
only if addr is kernel address, otherwise set dst_reg=0 and move on.

This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.

[Alexei suggested for x86]
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
---

Changes in v4:
* Used IS_ENABLED() instead of #ifdef.
* Dropped the else case that is not applicable for PPC64.


 arch/powerpc/net/bpf_jit_comp64.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Christophe Leroy Sept. 29, 2021, 11:44 a.m. UTC | #1
Le 29/09/2021 à 13:18, Hari Bathini a écrit :
> From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
> 
> On PPC64 with KUAP enabled, any kernel code which wants to
> access userspace needs to be surrounded by disable-enable KUAP.
> But that is not happening for BPF_PROBE_MEM load instruction.
> So, when BPF program tries to access invalid userspace address,
> page-fault handler considers it as bad KUAP fault:
> 
>    Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)
> 
> Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
> mode) could either be a valid kernel pointer or NULL but should
> never be a pointer to userspace address, execute BPF_PROBE_MEM load
> only if addr is kernel address, otherwise set dst_reg=0 and move on.
> 
> This will catch NULL, valid or invalid userspace pointers. Only bad
> kernel pointer will be handled by BPF exception table.
> 
> [Alexei suggested for x86]
> Suggested-by: Alexei Starovoitov <ast@kernel.org>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>

Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>

> ---
> 
> Changes in v4:
> * Used IS_ENABLED() instead of #ifdef.
> * Dropped the else case that is not applicable for PPC64.
> 
> 
>   arch/powerpc/net/bpf_jit_comp64.c | 26 ++++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index 4170999371ee..e1ea64081ae1 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -727,6 +727,32 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
>   		/* dst = *(u64 *)(ul) (src + off) */
>   		case BPF_LDX | BPF_MEM | BPF_DW:
>   		case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
> +			/*
> +			 * As PTR_TO_BTF_ID that uses BPF_PROBE_MEM mode could either be a valid
> +			 * kernel pointer or NULL but not a userspace address, execute BPF_PROBE_MEM
> +			 * load only if addr is kernel address (see is_kernel_addr()), otherwise
> +			 * set dst_reg=0 and move on.
> +			 */
> +			if (BPF_MODE(code) == BPF_PROBE_MEM) {
> +				EMIT(PPC_RAW_ADDI(b2p[TMP_REG_1], src_reg, off));
> +				if (IS_ENABLED(CONFIG_PPC_BOOK3E_64))
> +					PPC_LI64(b2p[TMP_REG_2], 0x8000000000000000ul);
> +				else /* BOOK3S_64 */
> +					PPC_LI64(b2p[TMP_REG_2], PAGE_OFFSET);
> +				EMIT(PPC_RAW_CMPLD(b2p[TMP_REG_1], b2p[TMP_REG_2]));
> +				PPC_BCC(COND_GT, (ctx->idx + 4) * 4);
> +				EMIT(PPC_RAW_LI(dst_reg, 0));
> +				/*
> +				 * Check if 'off' is word aligned because PPC_BPF_LL()
> +				 * (BPF_DW case) generates two instructions if 'off' is not
> +				 * word-aligned and one instruction otherwise.
> +				 */
> +				if (BPF_SIZE(code) == BPF_DW && (off & 3))
> +					PPC_JMP((ctx->idx + 3) * 4);
> +				else
> +					PPC_JMP((ctx->idx + 2) * 4);
> +			}
> +
>   			switch (size) {
>   			case BPF_B:
>   				EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
>
diff mbox series

Patch

diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 4170999371ee..e1ea64081ae1 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -727,6 +727,32 @@  int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
 		/* dst = *(u64 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_DW:
 		case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
+			/*
+			 * As PTR_TO_BTF_ID that uses BPF_PROBE_MEM mode could either be a valid
+			 * kernel pointer or NULL but not a userspace address, execute BPF_PROBE_MEM
+			 * load only if addr is kernel address (see is_kernel_addr()), otherwise
+			 * set dst_reg=0 and move on.
+			 */
+			if (BPF_MODE(code) == BPF_PROBE_MEM) {
+				EMIT(PPC_RAW_ADDI(b2p[TMP_REG_1], src_reg, off));
+				if (IS_ENABLED(CONFIG_PPC_BOOK3E_64))
+					PPC_LI64(b2p[TMP_REG_2], 0x8000000000000000ul);
+				else /* BOOK3S_64 */
+					PPC_LI64(b2p[TMP_REG_2], PAGE_OFFSET);
+				EMIT(PPC_RAW_CMPLD(b2p[TMP_REG_1], b2p[TMP_REG_2]));
+				PPC_BCC(COND_GT, (ctx->idx + 4) * 4);
+				EMIT(PPC_RAW_LI(dst_reg, 0));
+				/*
+				 * Check if 'off' is word aligned because PPC_BPF_LL()
+				 * (BPF_DW case) generates two instructions if 'off' is not
+				 * word-aligned and one instruction otherwise.
+				 */
+				if (BPF_SIZE(code) == BPF_DW && (off & 3))
+					PPC_JMP((ctx->idx + 3) * 4);
+				else
+					PPC_JMP((ctx->idx + 2) * 4);
+			}
+
 			switch (size) {
 			case BPF_B:
 				EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));