| Message ID | 20200726100541.7710-4-hi@senzilla.io |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce EDK2 firmware builds | expand |
Hello, On Sun, Jul 26, 2020 at 12:07 PM D. Olsson <hi@senzilla.io> wrote: > > From: Dick Olsson <hi@senzilla.io> > > Prior to this, you had to manually download a pre-built EDK2 flash device > image (QEMU_EFI.fd) in order to boot this configuration with QEMU. > Now, the configuration is building EDK2 from source. > > Signed-off-by: Dick Olsson <hi@senzilla.io> > > --- > > Revision 2: > > * Explicitly added the default EDK2 platform to defconfig > --- > board/aarch64-efi/readme.txt | 8 +++----- > configs/aarch64_efi_defconfig | 2 ++ > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/board/aarch64-efi/readme.txt b/board/aarch64-efi/readme.txt > index 65a6345b6c..08747027e1 100644 > --- a/board/aarch64-efi/readme.txt > +++ b/board/aarch64-efi/readme.txt > @@ -22,13 +22,11 @@ qemu-system-aarch64 \ > -cpu cortex-a57 \ > -m 512 \ > -nographic \ > - -bios </path/to/QEMU_EFI.fd> \ > + -bios output/images/QEMU_EFI.fd \ > -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \ Should we change this to point to the QEMU_VARS file too as was done in patch 4 for board/pc/readme.txt ? Otherwise looks good, I tested it and it works for me.
Hi Erico, On Monday, 27 July 2020 17:30, Erico Nunes <nunes.erico@gmail.com> wrote: > > + -bios output/images/QEMU_EFI.fd \ > > -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \ > > > > > > Should we change this to point to the QEMU_VARS file too as was done > in patch 4 for board/pc/readme.txt ? Yes, that makes sense. I will also switch from using -bios to use the -pflash interface instead as this is considered better practice when building the firmware like this (in fact, locally I've been testing with pflash the whole time). Cheers! D. Olsson PGP: 8204A8CD
diff --git a/board/aarch64-efi/readme.txt b/board/aarch64-efi/readme.txt index 65a6345b6c..08747027e1 100644 --- a/board/aarch64-efi/readme.txt +++ b/board/aarch64-efi/readme.txt @@ -22,13 +22,11 @@ qemu-system-aarch64 \ -cpu cortex-a57 \ -m 512 \ -nographic \ - -bios </path/to/QEMU_EFI.fd> \ + -bios output/images/QEMU_EFI.fd \ -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 \ -netdev user,id=eth0 \ -device virtio-net-device,netdev=eth0 -Note that </path/to/QEMU_EFI.fd> needs to point to a valid aarch64 UEFI -firmware image for qemu. -It may be provided by your distribution as a edk2-aarch64 or AAVMF -package, in path such as /usr/share/edk2/aarch64/QEMU_EFI.fd . +Note that output/images/QEMU_EFI.fd is the flash device file built by +the EDK2 package. diff --git a/configs/aarch64_efi_defconfig b/configs/aarch64_efi_defconfig index 2aab6e9699..3da6542ea0 100644 --- a/configs/aarch64_efi_defconfig +++ b/configs/aarch64_efi_defconfig @@ -12,6 +12,8 @@ BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_PACKAGE_HOST_GENIMAGE=y # Bootloader +BR2_TARGET_EDK2=y +BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU=y BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_ARM64_EFI=y