diff mbox

[U-Boot] powerpc/85xx: enanle USB2 gadget mode for corenet ds board

Message ID 1310611370-20652-1-git-send-email-Shaohui.Xie@freescale.com
State Changes Requested
Delegated to: Kumar Gala
Headers show

Commit Message

shaohui xie July 14, 2011, 2:42 a.m. UTC
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/fdt.c          |    3 ++-
 board/freescale/corenet_ds/corenet_ds.c |    1 +
 include/configs/corenet_ds.h            |    2 ++
 3 files changed, 5 insertions(+), 1 deletions(-)

Comments

Kumar Gala July 14, 2011, 12:59 p.m. UTC | #1
1. fix commit message 'enanle' -> enable
2. add some details about how this change addresses the issue in commit message

- k

On Jul 13, 2011, at 9:42 PM, Shaohui Xie wrote:

> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
> ---
> arch/powerpc/cpu/mpc8xxx/fdt.c          |    3 ++-
> board/freescale/corenet_ds/corenet_ds.c |    1 +
> include/configs/corenet_ds.h            |    2 ++
> 3 files changed, 5 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
> index d9e3e7e..60cb210 100644
> --- a/arch/powerpc/cpu/mpc8xxx/fdt.c
> +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
> @@ -164,7 +164,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
> 			if (mode_idx < 0 && phy_idx < 0)
> 				printf("WARNING: invalid phy or mode\n");
> 		} else {
> -			break;
> +			if (i > CONFIG_SYS_USB_DEVICE)
> +				break;
> 		}

I'm not sure that CONFIG_SYS_USB_DEVICE is the right way / #define to use for this purpose.

Do we need the 'else' clause at all?

> 	}
> 	if (!usb1_defined) {
> diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
> index cf9b7b8..b1e7823 100644
> --- a/board/freescale/corenet_ds/corenet_ds.c
> +++ b/board/freescale/corenet_ds/corenet_ds.c
> @@ -236,6 +236,7 @@ void ft_board_setup(void *blob, bd_t *bd)
> #endif
> 
> 	fdt_fixup_liodn(blob);
> +	fdt_fixup_dr_usb(blob, bd);
> }
> 
> int board_eth_init(bd_t *bis)
> diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
> index c9cc22a..2c86ba3 100644
> --- a/include/configs/corenet_ds.h
> +++ b/include/configs/corenet_ds.h
> @@ -580,6 +580,8 @@
> #define CONFIG_USB_EHCI_FSL
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> #define CONFIG_CMD_EXT2
> +#define CONFIG_HAS_FSL_DR_USB
> +#define CONFIG_SYS_USB_DEVICE	2
> 
> #define CONFIG_MMC
> 
> -- 
> 1.6.4
> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
shaohui xie July 15, 2011, 3:13 a.m. UTC | #2
>Subject: Re: [U-Boot] [PATCH] powerpc/85xx: enanle USB2 gadget mode for
>corenet ds board
>
>1. fix commit message 'enanle' -> enable 2. add some details about how
>this change addresses the issue in commit message
>

[Xie Shaohui] OK, Thanks.

>On Jul 13, 2011, at 9:42 PM, Shaohui Xie wrote:
>
>> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
>> ---
>> arch/powerpc/cpu/mpc8xxx/fdt.c          |    3 ++-
>> board/freescale/corenet_ds/corenet_ds.c |    1 +
>> include/configs/corenet_ds.h            |    2 ++
>> 3 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c
>> b/arch/powerpc/cpu/mpc8xxx/fdt.c index d9e3e7e..60cb210 100644
>> --- a/arch/powerpc/cpu/mpc8xxx/fdt.c
>> +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
>> @@ -164,7 +164,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
>> 			if (mode_idx < 0 && phy_idx < 0)
>> 				printf("WARNING: invalid phy or mode\n");
>> 		} else {
>> -			break;
>> +			if (i > CONFIG_SYS_USB_DEVICE)
>> +				break;
>> 		}
>
>I'm not sure that CONFIG_SYS_USB_DEVICE is the right way / #define to use
>for this purpose.
>
[Xie Shaohui] I'm not sure about this too. The CONFIG_SYS_USB_DEVICE is used to tell driver
How many USB controllers the board has, then the driver will not break until it scanned all the controllers.

>Do we need the 'else' clause at all?
>
[Xie Shaohui] There is a macro USB_MAX_DEVICE which is defined in include/usb.h, it's value is 32,
Without else, driver will scan 32 times in 'hwconfig' looking for 'usbx' (x->1..32).


Best Regards, 
Shaohui Xie
diff mbox

Patch

diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index d9e3e7e..60cb210 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -164,7 +164,8 @@  void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 			if (mode_idx < 0 && phy_idx < 0)
 				printf("WARNING: invalid phy or mode\n");
 		} else {
-			break;
+			if (i > CONFIG_SYS_USB_DEVICE)
+				break;
 		}
 	}
 	if (!usb1_defined) {
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index cf9b7b8..b1e7823 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -236,6 +236,7 @@  void ft_board_setup(void *blob, bd_t *bd)
 #endif
 
 	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
 }
 
 int board_eth_init(bd_t *bis)
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index c9cc22a..2c86ba3 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -580,6 +580,8 @@ 
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_CMD_EXT2
+#define CONFIG_HAS_FSL_DR_USB
+#define CONFIG_SYS_USB_DEVICE	2
 
 #define CONFIG_MMC